Choosing a boat for fishing or outdoor activities on the water is always associated with a search for a compromise between weight, dimensions in the assembled form and comfort of being on the water. Star 320 NDND It has proven to be a versatile option for both quiet walks on small rivers and fishing on large reservoirs in windy weather, with a focus on inflatable floor technology, which changes the experience of boating.
Unlike the classic models with plywood peyol, here the system is used. NDMA It's a low-pressure inflatable floor that provides a rigidity comparable to hard coatings, but it also significantly reduces the overall weight of the structure, allowing the boat to be transported even in a passenger car with a small boot or even in a backpack without requiring a special trailer, a feature that makes the model so popular among tourists and mobile fishermen.
When choosing this model, it is important to consider not only the length, but also the width, which in three-meter modifications often becomes a critical parameter for stability. Star 320 It has the optimal proportions to make it possible for two passengers to feel confident on the water with a full set of equipment, and then we will discuss in detail the design features, technical nuances and rules of operation of this boat.
Design features and technology of BNDT
The fundamental difference of this model is the application of technology. NDMAIn classic boats, the bottom is assembled from aluminum or plywood sheets, which adds weight and build time to the structure, and here the bottom is a separate inflatable section made of dense material with internal stretch marks, and when pumped to working pressure, this section becomes a rigid plate, which provides excellent performance. hydrodynamics and resilience.
The material for production is reinforced PVC It's a high density, ultraviolet, fuel- and mechanically resistant tank, and it's inflatable tubes, separated into independent compartments, which provides added safety, because if one of the cylinders is damaged, the boat will stay afloat thanks to the other sections.
Technical nuances of the inflatable floor
The inflatable floor of the NDNDM is made up of many cells that, when pumped, create a cell structure that can withstand considerable stress, but requires careful pressure control with a gauge, a subpumped bottom can deform under the weight of passengers, and a pumped bottom can burst in the heat.
We should pay special attention to the transom. The 320 star is usually integrated into an inflatable structure or is a removable element reinforced by a special insert. This allows you to install motors with a capacity of up to 5-8 horsepower, which for a three-meter body is the optimal solution for achieving glides with one or two passengers.
Technical specifications and dimensions
For the potential owner, the key parameters are not only length, but also internal volume, load capacity and weight. Star 320 NDND It's designed to be as functional as possible in a compact size, and it's designed to be comfortable for two adults, leaving room for a fishing box or a small load.
The weight of the kit is among the lowest in its class. With no heavy sleigh and plywood floor, the total weight of the boat assembled rarely exceeds 30-35 kilograms. This is critical if you plan to launch alone without the help of a ladder or winch. The ease of transportation compensates for some limitations on the interior area.
| Parameter | Meaning | Note |
|---|---|---|
| Total length | 320 cm | Including inflatable parts |
| general width | 140-150 cm | Depends on the pressure. |
| Load capacity | 400-450 kg | Considering the weight of the boat |
| Weight of kit | ~32 kg | No motor. |
| Passenger capacity | 2 people. | Optimally. |
It is important to note that the actual load capacity figures can vary depending on the equipment and year of manufacture. Always check the technical data sheet of the particular product. The working pressure in the cylinders is 0.2 atm, and in the bottom of the NDND - up to 0.4-0.5 atm. Compliance with these parameters guarantees the declared stiffness and durability of the seams.
Equipment and ergonomics of internal space
Interior space The 320 is designed to meet the needs of the fisherman and the tourist, and the inflatable keel, which is an extension of the bottom of the NDNDM, provides excellent course stability. The boat is less traversed on the wave and easier to drive, which reduces the fatigue of the driver during long transitions.
The sides are equipped with comfortable liner cables that can be held on board or disembark, and they also serve to attach additional equipment. anchor, and in the aft - fasteners for the installation of holders of rods or hinged transverses for electric motors.
- 🎣 The kit usually comes with two inflatable seats (banks) that can be moved along the length of the boat for balancing.
- ⚓ The presence of a hinge beam around the perimeter protects the sides from impacts on the pier and facilitates the pulling of the boat to the shore.
- 🛠 The remake includes material for patches, glue and key for valves, which allows you to eliminate minor damage in the field.
The ergonomics of the seats allow you to change their position, which is especially true when you're trolling or drifting, and shifting the center of gravity forward or backward helps you adapt the boat to different loads and different turbulence conditions. Star 320 A flexible tool in the hands of an experienced boater.
☑️ Checking before getting on the water
Compatibility with motors and speed
The choice of motor for Star 320 NDND The design of the inflatable floor and transom imposes limits on maximum power. To confidently go to the planing with one person (about 80-90 kg), a 5 hp motor is enough. However, two passengers and cargo will require a more powerful power plant, up to 9.9 hp, if the transom design allows.
When installing the engine, it is important to be centered, because the boat is light, moving the engine too far back can lead to nose snares and loss of controllability. The optimal solution is to use long-leg motors, which ensures better propeller immersion and reduces the risk of cavitation.
⚠️ Attention: Exceeding the recommended engine power can lead to deformation of the transcript insert and depressurization of the seams. Always use only certified attachment motors corresponding to the class of the boat.
On the water. Star 320 It's a very good wave scent, because it's got a high nose and a hard bottom, and it doesn't choke on splashes and it's a very good ripple, but it's not a speedboat, and it can be dangerous to do a lot of high-speed maneuvers because of the relatively narrow hull.
To save fuel and increase the life of the engine on PVC boats, it is recommended not to keep the throttle constantly open to the maximum. The optimal mode is 80-90% of full power, which gives 95% of the maximum speed.
Operational rules and maintenance
Durability of the boat Star 320 It depends on proper care, because PVC material does not tolerate long-term storage in a deflated state, especially in compressed form, after each operation, the boat must be thoroughly washed with fresh water, dried and then packaged, which will prevent mold and the destruction of the adhesive seams.
Special attention should be paid to valves. Periodically check them for leakage and absence of sand. The entry of abrasive particles into the valve can lead to air embroidery on the water, which is a critical situation. For pumping, it is better to use foot or electric pumps with pressure gauges to accurately control pressure.
- 🧼 The wash is carried out with a soft sponge using special means for PVC, avoiding aggressive chemicals and solvents.
- ☀️ Keep the boat in a place protected from direct sunlight, as ultraviolet light is the main enemy of polyvinyl chloride.
- 🔧 Once a season, it is recommended to lubricate the movable parts of the valves with silicone lubrication to prevent freezing.
If you notice a slight loss of pressure, don't panic. Air temperature affects internal pressure in cylinders. During the day, the pressure can rise and at night it can fall. Adjust the pressure depending on weather conditions using the gauge.
Comparison with analogues and final conclusions
There are many analogues in the 3.2 meter class on the market, such as: Flagship, Corsard or Aqua. However, Star 320 NDND It's a price-performance balance that makes it stand out, and the use of inflatable floor technology in this price segment gives it an advantage over its competitors with removable paioles in terms of ease of assembly.
The main competitors are slate bottom boats (aluminum or plywood) that are cheaper, but heavier and take longer to assemble. High-pressure inflatable floor boats (HBP) will be tougher, but significantly more expensive and heavier. Star 320 It is a niche for those who value mobility.
⚠️ Attention: When buying, pay attention to the availability of a certificate of conformity and a warranty card. The market is full of replicas that may not match the declared specifications of the strength of the seams.
In conclusion, Star 320 NDND It's a reliable choice for fishing and recreation, it forgives mistakes for beginners, it's easy to drive and it doesn't require complicated maintenance, and if you're looking for a boat that can be quickly assembled and put in the trunk just as quickly, it's a great buy.
The key advantage of the model is the combination of light weight, NDNDM technology and affordable price, which makes it a leader in the segment of tourist boats.
Frequently Asked Questions (FAQ)
Can I use the Star 320 boat at sea?
Use at sea is only possible in calm weather and in close proximity to the shore, and the design is not designed for open sea and strong waves due to the low side and lightness of the hull, which can be dangerous.
Which glue is better to use for puncture repair?
For repair of PVC products, it is best to use a two-component polyurethane adhesive specifically designed for boats. A conventional "moment" or rubber adhesive may not provide pressure tightness.
How long does it take to assemble and disassemble a boat?
With experience, assembly takes about 10-15 minutes, disassembly and packaging - 15-20 minutes. The time depends on the pump used and the conditions on the shore (wind, sand).
Do I need to register the boat Star 320 in GIMS?
Registration is required if the weight of the boat with the engine installed exceeds 200 kg. Star 320 When complete with a light motor, it usually weighs less than 200 kg, registration is often not required, but the rules may change, so check the current legislation.