Finding a reliable fishing boat often leads avid fishermen to compromise between cost, weight and durability. plastic-boat They occupy a unique niche, offering a great alternative to traditional PVC materials and heavy aluminum, combining a polyethylene or fiberglass body with a power engine. 9.9 hp It creates a universal tandem that can meet the needs of both a single fisherman and a small company of two or three people.
A 9.9 horsepower is the gold standard for small boats ranging in length from 3 to 4.5 meters, and it allows you to confidently ride the wave, overcome the oncoming current and quickly get to the cherished fishing points without consuming an exorbitant amount of fuel. plastic-boat dictates its operating requirements, different from the care of inflatable analogues.
In this article, we will explain in detail why the plastic + 9.9 hp bundle is considered one of the most rational in the modern market, you will learn about the technical nuances, the advantages of various materials of the case and get practical recommendations for choosing equipment that will last for decades.
The advantages of plastic over PVC and aluminum
When it comes to choosing a material, many people traditionally fluctuate between inflatable PVC and metal. plastic-boat And unlike PVC, plastic can't be accidentally pierced by a branch or cut against a sharp rock on the shore, which offers a tremendous advantage when landing on unequipped shores, which is critical for fishing in the wild.
The comparison with aluminum also shows interesting results: Aluminum shells, when hit by an underwater obstacle at speed, can get a dent that is difficult to straighten, or even a crack on the weld. Polyethylene shells They have shape memory, they just spring back in on moderate impacts, and they also have better noise insulation, which is important for a fisherman who doesn't want to scare the fish away with motor noise or waves splashing against the side.
⚠️ Warning: Despite its high impact resistance, plastic is afraid of open fires and extreme temperatures. Never smoke near a fuel tank inside the cockpit, and never leave the boat in direct sunlight on a hot trailer without ventilation.
Another important aspect is the durability of the material: modern composites and plastics are not susceptible to corrosion, rotting and ultraviolet radiation (if there are appropriate additives in the composition). Term of service A high-quality plastic case can exceed 20-30 years of active use, which makes the initial investment quite justified.
- 🛡️ High resistance to mechanical damage and abrasion on the ground.
- ⚖️ Optimal balance between the weight of the body and its strength specifications.
- 🔇 Low noise level when driving on water compared to metal.
- 🎨 Possibility of casting complex contours that improve seaworthiness.
Why 9.9 HP is the Best Option
The choice of a 9.9 hp engine for a plastic boat is not only financially motivated, but also the physics of small boats. gelling This is the power that can be used to load 1-2 people, and weaker engines (2-5 hp) will only pull the vessel in displacement mode, which is slow and inefficient for long-distance crossings.
The design of the engine is a big technical feature. Many current 9.9 hp models are structurally strangled versions of 15-strong engines, which means that the owner has a reliable piston group and safety margin, and if necessary (and with the documents), the engine can be easily converted to 15 hp. Two-stroke engines In this class, they remain popular because of their ease and simplicity, although four-stroke counterparts are gaining market share due to their efficiency and quiet operation.
The two-stroke nine weighs about 25-28 kg, allowing it to be installed and transported to one person without the use of sophisticated lifting equipment, especially for plastic boats, which are often stored on a trailer or suspension, and where each kilogram on the transom affects differentiation.
Economy is another bargain: 9.9 hp fuel consumption in planing mode is approximately 2.5-3.5 liters per hour. For a fisherman who spends 8-10 hours on the water, a full tank of 12-15 liters provides a comfortable range with reserve.
Technical specifications and load capacity
When choosing a plastic boat for the engine 9.9 hp, you need to carefully study data-sheet figures. maximum engine powerExceeding this limit can lead to the transom breaking or the vessel tipping over in corners. Usually for a length of 3.5-4.0 meters, the recommended power ranges from 9.9-15 hp.
The load capacity is made up of the weight of passengers, cargo (rig, anchor, sonar) and the weight of the fuel tank engine itself. eigenvalue This is something that we need to consider when calculating payloads, for example, if the maximum payload is 450 kg and the boat weighs 80 kg, the engine with a tank of 40 kg, then the passengers and gear are left with about 330 kg.
☑️ Checking before buying a boat
Special attention should be paid to the design of the transom. On plastic boats, it can be integrated (cast) or hinged; the integrated transom is more reliable, but requires strict adherence to the angles of the engine installation; the hinged transmolphin is more convenient for storage, but adds extra attachment points that need to be checked regularly.
| Parameter | Boat 3.2m | Boat 3.6m | Boat 4.0m |
|---|---|---|---|
| Body weight (kg) | 45-55 | 60-75 | 80-95 |
| Load capacity (kg) | 300-350 | 400-450 | 500-600 |
| Recommended motor (hp) | 5-9.9 | 9.9-15 | 15-20 |
| Capacity (person) | 2 | 2-3 | 3-4 |
Do not forget that the real speed on the water depends not only on the power of the engine, but also on the contours of the body. Kiel-drift better cut the wave, but require more power to enter plane, while flat-bottoms start faster, but feel more comfortable only in calm water.
Overview of popular models and manufacturers
The plastic boat market is represented by both large factories and small workshops, including models such as Crimea, Salute (although it is aluminum, they have plastic counterparts in the dealer line), as well as specialized brands such as the Crimea, the Salute (although it is aluminum, they have plastic counterparts in the dealer line), and specialized brands such as the “Salute” model. frigate, Aquamaster or brig (in the RIB segment, but there are plastic counterparts), but when talking about all-plastic boats, it is worth paying attention to domestic brands adapted to our conditions.
The Plast or Tverplast models are often made of food-grade polyethylene, and they are famous for their indestructibility. Fishing is popular for extended nose models, where it is convenient to place sonar and tackle. Some manufacturers offer boats with already built-in runduks, which eliminates the need to buy separate sealants.
Secrets of choosing the color of the boat
Bright colors (salad, orange) are more visible on the water, which increases safety, but can deter fish in clear water. Dark green or camouflage colors are better to mask the boat, but warm up more in the sun. For fishing in transparent waters, it is better to choose matte light colors.
When choosing a model, pay attention to the availability timberIn plastic boats, this is often just a thickening of the hull, but it's better if you have a rubber edging, and it saves the sides from scratch when you dock to the dock or on another vessel.
- 🏆 Aquamaster - known for a wide range of models and affordable prices.
- 🏆 Baby-N compact models, ideal for single fishing with a motor up to 5-9.9 hp
- 🏆 Vyatka-Pro - offer reinforced transom under more powerful motors.
Operation and care of plastic case
Caring for a plastic boat is much easier than PVC or metal, and the main rule is to wash fresh water regularly, especially if you have been fishing in salt water or in bodies of water with abundant aquatic vegetation. Polishing Plastic case is rarely required only if the plastic has lost gloss from a long stay in the sun.
Winter storage requires no special conditions, except cleaning from water and dirt. Plastic is not afraid of frost, but becomes more fragile at negative temperatures. Therefore, moving the boat in winter (for example, from a trailer to a kilblock) should be with extreme caution, avoiding impacts. It is recommended to keep the boat upside down or on special lodgings to avoid deformation of the hull under its own weight.
⚠️ Warning: Do not use aggressive solvents (acetone, gasoline) to clean the plastic case; they may damage the material structure or wash away the protective UV layer; use only soft boat chemistry or soap solution.
Plastic boat repairs, fortunately, don't require complex equipment, and you can polish the small scratches and brew the cracks with a special dryer with a filler rod of the same material, which makes the plastic repairable even in the field, if you have a repair kit.
To prevent algae from fouling in stagnant water, lubricate the underwater part with silicone lubricant or use special anti-fouling coatings for plastic, which will also make it easier to wash away dirt after fishing.
Tuning and equipment for comfortable fishing
The plastic boat is a great tuning platform, and unlike the inflatable boat, you can attach any rod holder, sonar brackets, or hanging tables to the hard side. electric-anchor winchesFor the engine 9.9 hp is also relevant installation of the sensor position of the lower unit (trim), although at low power this is less critical.
Fishing comfort is directly dependent on the organization of space. Plastic boats often have a smooth bottom, so the use of anti-slip mats (EVA mats) is mandatory. They not only prevent slipping, but also create a thermal barrier, keeping the feet warm in cold weather. Installing soft overhead seats on cans also turns a Spartan boat into a comfortable boat for hours of waiting for a stick.
Don't forget to light. The installation of running lights is mandatory under GIMS rules, but for fishing, a powerful spotlight or LED tape around the perimeter of the cockpit is also useful, and you can organize power from a separate small battery attached to the handuk.
Competent tuning of a plastic boat increases not only comfort, but also safety of fishing, allowing you to focus on the process, not on maintaining balance.
Frequently Asked Questions (FAQ)
Frequently Asked Questions (FAQ)
Do I need to register a plastic boat in GIMS?
Registration is mandatory if the weight of the boat in running order (with an engine) exceeds 200 kg. Since plastic boats are heavier than PVC, and the 9.9 hp engine weighs about 30 kg, the total weight is often approached this boundary. The exact calculation depends on the weight of the boat itself, indicated in the passport, plus the weight of the engine, fuel tank and standard equipment. If the amount exceeds 200 kg, registration is mandatory.
Can I use a 9.9 hp engine on a boat with a 5 hp limit?
Installing a motor more powerful than the one recommended by the manufacturer violates the stability of the vessel and can lead to its rollover, and it is a violation of the rules of operation of small craft and in the event of an emergency will entail legal liability.
How to store a plastic boat in winter?
The best storage space is indoors (garage, shed) or under a canopy. The boat needs to be washed, dried and turned upside down or mounted on the kilblocks/crossbars so that the body does not deform. It is important to provide ventilation to avoid condensation and mold inside.
Does the engine develop a 9.9 hp plane with two passengers?
On boats ranging in length from 3.5 meters and keelwitting up to 10-12 degrees — yes, it develops. Speed will be 20-25 km / h. On heavier or wider flat-bottoms, access to the plane with two adult passengers can be difficult, and the boat will go in transition mode, which increases fuel consumption.