Fishing and rest on the water require a reliable watercraft that will withstand any vagaries of the weather and features of the reservoir. PHD boats North The low-pressure polyethylene they are made of has a unique strength and flexibility, making them ideal for Russian rivers and lakes.
Unlike the classic materials, PAP It's not corrosive, it doesn't rot, it doesn't require painting, and when you choose a particular model, it's important to consider not only the length of the case, but also the design features that the manufacturer offers, and these are the factors that determine how comfortable you'll be fishing alone or with a group of friends.
Key features of the PND material
The basis of the design is food polyethylene, which is processed using rotational molding technology. monolithic The material has the shape memory effect, where it hits a rock or ice, it only temporarily deforms, and then it returns to its original geometry.
It is important to note that polyethylene It is much lighter than metal, but also stronger than most plastics used in shipbuilding, and it is not afraid of ultraviolet light, harsh chemical environments, and temperature changes from -50 to +60 degrees Celsius, which ensures a long life, even under heavy operation in harsh conditions.
⚠️ Attention: Despite the high strength, it is not recommended to drag the boat along the sharp rocky bottom for long distances with a drag - this can lead to abrasion of the lower part of the hull.
Another advantage of the material is that it's environmentally friendly and healthy, unlike some composite resins. PAP It does not emit harmful substances when heated in the sun, which is especially true if you plan to use the boat on hot summer days, when the temperature inside the hull can significantly increase.
To increase the service life, it is recommended to periodically treat the outer surface of the housing with special protective compounds for plastic containing UV filters.
Popular models of boats North
The manufacturer offers a wide range of models that will meet the needs of both solo fishermen and family vacationers, each with its own unique features related to size, load capacity and equipment, and analyze the most popular options available on the market.
The range is frequently updated, new ergonomics solutions are introduced, and below is a table that allows you to compare the main technical specifications of popular modifications.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Weight (kg) |
|---|---|---|---|---|
| North-3 | 320 | 145 | 350 | 45 |
| North-3.6 | 360 | 150 | 450 | 55 |
| North-4 | 400 | 160 | 550 | 65 |
| North-4.5 | 450 | 170 | 700 | 75 |
Choosing between models, you should focus on the number of passengers and engine type. Small water bodies and quiet waters are great for compact versions, while for large rivers and excitement, it is better to choose more overall options with high sides.
Advantages over PVC and aluminum
The competition between materials in shipbuilding has been going on for a long time, and everyone has their supporters. PDN They occupy a unique niche, combining the best qualities of their competitors, and they don't rust like aluminum, and they don't fear punctures like PVC, and that makes them a versatile fishing tool.
Aluminum boats often suffer from electrochemical corrosion, especially when used with powerful motors. Polyethylene It's completely inert to water and salts, and it's also very soundproof, and the water splashing and the motor are much less audible, which is important for fishing disguises.
- 🛡️ High impact resistance: the material can withstand impacts on ice and rocks without cracking.
- 🔇 Silent: It extinguishes the vibration of the motor and the noise from the waves, ensuring a comfortable fishing experience.
- ⚖️ Optimal weight: lighter than metal, making it easier to transport on the roof of the car.
- 💰 Durability: the service life exceeds 20 years without loss of performance.
And it's also worth mentioning that it's maintainable, and unlike a composite that's hard to repair in the field, damage is not good. PAP You can seal with a normal building hair dryer or a soldering iron with a wide nozzle, which makes the boat independent of service centers.
The main advantage of HDPE is the combination of the indestructibility of plastic with the ease inaccessible to the metal, with complete independence from storage conditions.
Setup and capabilities of tuning
The basic equipment usually includes the hull itself, the outboard motor and the seat, but modern models often come with additional comfort elements, so the owner can self-equip the vessel, turning it into a full-fledged fishing boat.
The attachments are equipped with special platforms and fasteners, which allow the installation of sonars, rod holders and anchor systems. Rotary molding technology allows you to embed additional niches and knobs directly in the production process, which is impossible when assembled from sheet material.
The following are some useful upgrades for your boat:
- 🚩 Installation of inflatable tubes on the sides to increase stability and protection against spray.
- 🛡️ Installation of protective keel tape for sliding through shallow water and sand.
- ⚓ Organization of runduks in the nose for storage of gear and equipment.
- 💡 Fixing LED tape around the perimeter for night fishing and safety.
⚠️ Note: When installing additional equipment, be sure to ensure that the weight is distributed evenly so as not to disturb the differentiation of the vessel and the driving performance.
Tuning can also be applied to interior designs, with many anglers placing soft overhead cushions on rigid seats, which greatly enhances comfort while waiting for hours of cooling, and the installation of awning frames to protect against the sun or rain is also popular.
Rules of operation and storage
Although the material is very durable, following simple rules of operation will prolong the life of your boat. MHP boats It doesn't require much maintenance, but there are some nuances, like in winter, when polyethylene gets tougher, it can be more dangerous to hit in the cold than in summer.
Keeping the boat indoors or outdoors is possible, but prolonged downtime in direct sunlight without water inside can lead to slight deformation of the shape. It is recommended to fill the body with water or keep it in the shade during prolonged storage in the summer.
☑️ Preparation for winter storage
Use plain water and a soft brush to clean the surface. Aggressive solvents can damage the structure of the plastic or wash away the protective layer. If scratches appear on the body, they can be polished, returning the product to its original shine.
The secret to long service
Experienced owners recommend lubricating rubber seals (if they are in the luxury version) with silicone lubricant once a season to prevent them from drying out and cracking.
Frequently Asked Questions (FAQ)
Can I use a HPD boat with a powerful motor?
Yes, the transom is designed to handle specific loads depending on the model, but it is important to follow the manufacturer's recommendations for maximum engine power, so as not to overload the stern and maintain controllability.
How to repair the boat in case of serious damage?
The repairs are done using polyethylene welding, and you'll need a hair dryer or a special soldering iron with HDPE nozzles and rods made of the same material, and the damage is cleaned, heated and sealed, forming a monolithic seam.
How stable is the boat on the wave?
Thanks to the material, the PHD boat has a high buoyancy and cushioning shocks against the wave better than hard metal. However, stability primarily depends on the width of the hull and the design of the bottom of the particular model.
Do I need to register such a boat in the GIMS?
Registration is required if the weight of the curbed vessel exceeds 200 kg or the power of the installed engine is more than 8 kW (about 10.88 hp). Most HDPE models are lighter than this threshold, but when installing a powerful engine, the amount can exceed the limit.