Choosing a boat for fishing or resting on the water often comes down to finding the perfect balance between load capacity, comfort and weight. NDNThey're very seaworthy, because of the low-pressure inflatable floor, and there's a line of models that stand out among the many manufacturers. RocketIt became popular due to the successful combination of price and quality.
Modern models of this series are equipped with reinforced cylinders and a durable bottom, which allows them to be used not only on calm lakes, but also on rivers with a moderate current. PVCThe silk, used in production, is highly resistant to abrasion and ultraviolet radiation, making the boat a reliable partner for both avid angler and a lover of family walks.
In this article, we will discuss in detail the design features, technical specifications and nuances of the operation of these boats. low-pressure It's considered optimal for overcoming the excitement of the water, and we'll also discuss what to look for when buying, so you don't get disappointed in your choice.
Design features and materials
The basis of durability of any inflatable boat is the quality of the materials used. Rocket Traditionally made from reinforced PVC density from 750 to 900 g / sq.m. Such material withstands contact with sharp stones, snags and shell, without losing its tightness.
The key element here is the bottom itself, which is made using the technology of NDNDM. Unlike plyol or inflatable floors of high pressure, this design provides excellent cushioning when hitting a wave. comfort Being in a boat in the wind.
⚠️ Warning: When standing in the sun for a long time, be sure to open the valves, as heating the air inside the cylinders and bottom can lead to a critical increase in pressure and deformation of the seams.
The reinforced stringers that go along the side, they give the whole structure a stiffness, and they keep the cylinders from bending inwards when they're loaded, keeping them perfectly fine. hull geometryThis is especially important when driving for an outboard motor, when the boat has to keep the planing.
Technical specifications of models
Boat line Rocket It's a multi-modification model, with different dimensions and load capacity, and each model is designed for a specific task, from single fishing to carrying two or three people with a full set of equipment.
Below is a table showing the main parameters of popular modifications, which will help you navigate the model range and choose the best option.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Weight (kg) |
|---|---|---|---|---|
| Rocket 260 | 260 | 120 | 300 | 28 |
| Rocket 290 | 290 | 130 | 400 | 32 |
| Missile 320 | 320 | 140 | 500 | 38 |
| Missile 350 | 350 | 150 | 650 | 45 |
It is worth noting that the real weight may vary slightly depending on the configuration, availability. transaxial Larger models are often fitted with a perimeter timber, which protects the sides when mooring.
Comfort and ergonomics on the water
Boat ergonomics Rocket It's designed to minimize fatigue during hours of water exposure, and it's designed to be a very flexible, wide-air seat, which doesn't press on your hips, and allows you to change your body position, and it's critical to keep you safe. comfort on long hikes.
The soft inflatable floor creates a cushion effect that extinguishes the impacts of the oncoming wave. Unlike the hard plyol floor, there is no risk of spinal injury or simply getting tired of constant shaking. The spacious cockpit allows you to place a sonar, a box with tackles and a thermos without compromising freedom of movement.
- 🎣 Convenient location of the keys for rowing in calm weather without motor.
- ⚓ The presence of liner cables around the perimeter for safe holding when rolling.
- 🛡️ Protection of the transom from splashes and the possibility of installing additional equipment.
Many users have noted that the shape of the bow makes the boat very good at cutting the wave without burrowing its nose. balloon-geometry and the proper distribution of air volumes.
Assembly and preparation for launching
The process of assembling a NDND boat takes a little longer than inflating a high-pressure inflatable boat, but the result is worth it. First, you need to spread the cylinders on a flat surface and open all the valves.
☑️ Checklist for boat preparation
After the initial filling, the balloons take shape, and you can start straightening the bottom, and it's important to straighten all the folds so that the bottom is flat, and then you make the final pumping to the working pressure, which is usually 0.25 to 0.3 atmosphere.
For pumping, it is most convenient to use a foot or electric pump with a pressure gauge. Pressure control is mandatory: an under-performed boat will be less stable, and a pumped in the heat can be more difficult to control. burst Or deform.
The secret to fast assembly
Experienced water-engineers advise not to pump the boat to working pressure at once, it is better to leave it for 10-15 minutes in the sun (if warm), so that the material warms up and the seams "stand" in their places, and then apply pressure, which prolongs the life of the product.
Operation and care of PVC
To the boat Rocket You've been in the service of this craft for years, and you have to follow simple rules of operation, and after every fishing, especially in salt water or in murky overgrown bodies of water, you have to rinse it with fresh water, and the salt and the dirt act as an abrasive, gradually destroying it. PVC.
Drying is the most important step in the care, and even if the boat seems dry on the outside, there may be moisture inside the case or in the folds, and the dampness causes mold to appear, which not only damages the appearance, but also destroys the fabric structure, and it is better to dry in the shade, avoiding direct sunlight.
⚠️ Warning: Never pack a wet boat in a long-term storage case, guaranteed to cause fungus and unpleasant odors that will be very difficult to get rid of.
Check the valves regularly for leakage and cleanliness. A grain of sand trapped under the rubber valve pad can cause slow etching of air. Use a soft sponge and soap solution to clean, avoiding aggressive chemicals.
To protect the bottom from punctures when pulling the boat to a gentle shore, use special protective mats or just try to drag the boat by the nose, lifting the stern.
Comparison with competitors and final choice
There are many analogues on the market, but the boats of the series Rocket They often benefit from a balance of price and functionality, and compared to the budget Chinese counterparts, they usually use better glue and fittings, which directly affects the quality of the product. security on the water.
Competitors can offer lighter models by using thin PVC, but this reduces the product life. Plywood pit floor models will be stiffer on the go, but heavier to build and less comfortable on the wavelength. The choice is always up to the user and his priorities.
- 💰 Optimal ratio of price and quality of materials.
- 🌊 Excellent permeability in shallow water and thickets thanks to NDNDM.
- 🔧 Repairability and availability of remaplets on sale.
If you are looking for a versatile boat for fishing from the shore or from a machine that forgives mistakes to beginners and is reliable in operation, this option deserves close attention.
The Rocket series boats are the best choice for those who appreciate comfort on the wave and are ready to put up with a slightly longer assembly for the sake of safety and gentleness.
Frequently Asked Questions (FAQ)
Can a Rocket boat be used at sea?
Use is only possible in coastal areas in calm weather, and the design of NDNDM is not designed for high seas and high waves, where a rigid hull or specialized high-pressure inflatable vessels are required.
What is the maximum permissible weight of the engine?
For most models of the series Rocket recommended power of the engine is from 2 to 5 hp, which corresponds to the weight of about 10-15 kg. Exceeding this limit can lead to the destruction of the transom.
Do I need to register such a boat in the GIMS?
Under current legislation, registration is required for vessels weighing more than 200 kg in running order or with an engine of more than 8 hp (10.88 hp). Most models of the Rocket with low-power engines do not require registration, but the rules may change.
How to keep a boat in winter?
The boat must be thoroughly washed, dried and folded in a case, stored indoors at temperatures above -15°C, in straightened form or in free packaging to avoid clawing.