The modern market of small boats offers a wide range of boats that can meet the needs of both beginner anglers and professional boaters. RiverBoatsThe brand’s boats are often chosen for their ability to cope with severe loads on Siberian rivers and reservoirs.
The basis of the success of the brand was a competent approach to the design of inflatable boards and rigid bottom. reinforced PVC The high density of the vessel allows you to create resistant to mechanical damage and ultraviolet light, and these materials provide a long life, even in heavy operation in harsh climatic conditions.
In this article, we will discuss in detail the model range, technical nuances and features of choosing a specific modification for your tasks. Understanding the differences between the series will help to avoid mistakes when buying and save budget, choosing the optimal value for money.
Technological features and materials of production
Basis of boat quality RiverBoats It's a five-layer reinforced material that's often confused with conventional PVC, but has a completely different strength structure. The synthetic cord base takes the bulk of the tearing load, and the polymer layers provide tightness and resistance to aggressive environments. The "liquid seams" or hot bonding method is used to cross-link parts, which eliminates leakage at joints.
The design of the bottom deserves special attention, because it depends on the performance of the vessel. Depending on the series, the manufacturer offers inflatable floorboards, rigid aluminum sheets or inflatable bottoms with rigid inserts. Aluminum profileThe stainless stainless material used in stringers undergoes special treatment to prevent corrosion, which is critical for use in salt water.
⚠️ Warning: When operating boats with hard floorboard, do not allow long downtime under direct sunlight with pumped cylinders, since air expansion can deform the floor structure.
An important element of safety is the availability of submergedEven if the cylinders are completely damaged, the boat will remain afloat, giving the crew time to take action or wait for help, a requirement that is especially relevant for boats destined to enter large bodies of water.
Overview of popular series: RB, RBM and RIB
The brand's lineup is structured by size and purpose, which makes it easier for the buyer to navigate the catalog. RBB These are classic rowing and inflatable floor motor rowing boats, ideal for quiet fishing in small lakes, with minimal weight and compactness when assembled.
For those looking for a more universal solution, a series has been created. RBMThese models are equipped with a rigid aluminum floorboard, which allows you to develop a higher speed and feel more confident on the wave. keel-shaped The bottom provides an excellent way to planing even with medium-power engines, making such boats popular among spinning players.
The top of the engineering thought of the company are boats of the type rib Here, the inflatable tubes are connected to a full-fledged fiberglass or aluminum hull, which ensures maximum seaworthiness, allowing the vessel to be used as a full-fledged boat for trolling or diving.
- 🚤 RB series: Easy, compact, ideal for fishing alone or together.
- 🌊 RBM series: hard floor, high speed, resistance to rocky shores.
- ⚓ RIB series: professional seaworthiness, large cockpit, the ability to install navigation.
Comparative table of model specifications
To simplify the selection, we compare the key parameters of popular modifications, these parameters are averaged for standard configurations and may vary slightly depending on the year of release.
| Model | Length, m | Width, m. | Load capacity, kg | River power, engine power, hp |
|---|---|---|---|---|
| RB 300 | 3.00 | 1.42 | 450 | 8 |
| RBM 340 | 3.40 | 1.52 | 600 | 15 |
| RBM 370 | 3.70 | 1.65 | 750 | 20 |
| RIB 420 | 4.20 | 1.90 | 900 | 40 |
As can be seen from the table, with increasing dimensions, not only the load capacity increases, but also the power requirements. outboardExceeding the recommended power can lead to dangerous rolling and loss of handling, especially at high speeds.
Size also depends on the number of people in the crew and the amount of equipment. For long expeditions with an overnight stay, it is better to choose models with a margin for carrying capacity, so that the boat does not sit too low in the water.
Operation and preparation for the season
Proper preparation of the boat for water is the key to safe and comfortable fishing. Before the first descent, you must carefully check the pressure in the cylinders using a pressure gauge. Insufficient pressure can lead to deformation of the shape, and excessive pressure can lead to rupture of the seams when heated in the sun.
Special attention should be paid to the transom, the motor attachment area, which is the area of high loads, so (regular check) of fastenings and condition. coatboard Any signs of plywood stratification or metal corrosion should be eliminated immediately.
☑️ Boat check before season
It's important to fold the product properly for storage and transportation. The dirt and sand that gets inside the case works like an abrasive, so before packing, the boat needs to be thoroughly washed and dried. The wet material in the closed state quickly becomes covered with mold that destroys the fabric structure.
⚠️ Warning: Do not use aggressive chemicals, gasoline or solvents to clean PVC, as they can disrupt the protective layer of the material and cause it to break down.
Tuning and additional equipment
Basic boats often don't include comfort-enhancing elements, so many owners are self-tuning. electric motor Or an additional anchor, which allows you to move silently through the water and anchor in the current.
There are also demand for transom wheels, which make it much easier to move a motorized boat along the shore, and the installation of soft linings on cans (seats) makes waiting for many hours of cooling more comfortable, reducing the load on the spine.
Secrets of the sounder installation
To install the sonar sensor on the inflatable boat, it is better to use special suction cups or mounts on the transom, which do not require drilling of the body, this will preserve the warranty and tightness of the cylinders.
Safety is also a must, and having an anchor of sufficient length and a high-quality anchor is not a whim, but a necessity. In deep water or in high winds, the absence of an anchor can lead to the demolition of the boat on open water or on rocks.
Renovation and maintenance tips
Even the strongest material can be damaged if handled carelessly, small cuts and punctures are easily repaired at home with a remix that comes with the boat, the main thing is to degrease the surface and observe the temperature regime when glued together.
For serious damage, such as joints or large tears, it is better to contact a specialized service. Professionals use industrial hair dryers and rollers, providing a quality of gluing comparable to factory. Self-repair of complex nodes can lead to loss of warranty.
When sealing a puncture in the field, use a patch made of a remake, but before that, carefully wipe the damage site with an alcohol napkin for better grip.
Regular maintenance also includes valve lubrication and fittings inspection. Salt water is particularly aggressive to metal parts, so after each outing the boat must be rinsed with fresh water.
Conclusion and final recommendations
Boats RiverBoats They have proven to be reliable water assistants, combining accessibility and functionality. The choice of a particular model depends on your personal preferences, the type of reservoir and the planned loads. Budget models of the RB series are great for giving, and serious RBIs will become the basis for professional fishing.
When buying, pay attention not only to the price, but also to the completeness and quality of the seams. Warranty period for PVC material from RiverBoats is up to 3 yearsProper care and compliance with the rules of operation will allow the boat to serve you for decades.
The best choice for universal use is the RBM series models with hard floorboard, as they combine good speed, capacity and maintainability.
Remember that safety on the water depends not only on the equipment, but also on the skills of the boatmaster: learn the rules of behavior on the water, always carry life jackets and watch the weather forecast before leaving.
What is the maximum weight that River Boats can carry?
The load capacity varies by model. For example, the RB 300 is designed for 450 kg, and large RBI models can carry up to 1000 kg or more. It is important to consider that the load capacity includes the weight of people, motor, fuel and equipment.
Do I need to register a PVC boat in GIMS?
Registration is required for vessels weighing more than 200 kg (including engine weight) or with an engine power of more than 8 hp (10.88 kW). Most River Boats models with engines up to 10 hp and a lightweight hull do not require registration, but always check the current laws.
Is it possible to use a boat in winter?
The PVC material becomes hard in the cold, but does not lose strength when handled carefully, but inflating the boat in the cold should be carefully, without pumping, and warmed before storage to avoid condensation and icing of the valves.
What is the difference between RBM and RBM boats?
The main difference is the design of the bottom. RB have an inflatable floor (NDB), which makes them lighter and more compact to assemble. RBMs are equipped with a rigid aluminum floorboard, which provides better performance, speed and the ability to install a more powerful motor.