The modern market of small boats offers a wide range of solutions for fishing and outdoor activities on the water, however, ribboat These vessels, produced in Russia, have become popular among waterwalkers thanks to their sophisticated design and availability, and unlike many competitors, they use a special assembly technology that ensures rigidity even when fully loaded.
Many potential buyers are wondering why they should look at this brand among hundreds of others, and the answer lies in the balance between weight, load capacity and comfort of traveling on the wave. RiverBoat It offers solutions that are suitable for both calm lakes and for access to reservoirs with moderate chop, and it's not just an inflatable inflatable boat, but a full-fledged small boat with a soft bottom.
In this article, we will discuss design features, compare popular modifications and give practical tips for use, you will learn what hidden advantages and disadvantages can manifest during use. Competent choice This will help you avoid disappointment and save your budget in the future.
Design features and materials of production
The basis of the durability of any boat is the material from which it is made. PVC material It's a density of 850 to 1150 g/m2, depending on the model, which provides excellent resistance to puncture, abrasion against rocky bottoms and ultraviolet rays, and the seams are assembled using bonding technology, which ensures that the joints are tight and tensile.
An important part of the design is high-pressure This solution achieves a stiffness comparable to that of an aluminum sheet, while keeping the weight of the whole product low, and when assembled, the bottom forms an excellent keelson that improves course stability and reduces the risk of lateral wind demolition.
- 🛡️ Three-layer structure tissue protects against stratification and mechanical damage in contact with snags.
- ⚓ Reinforced transmutation boards made of moisture-resistant plywood are covered with a special varnish to protect against rotting.
- 🌊 The design of the cylinders has a streamlined shape, which minimizes the resistance of water on the go.
⚠️ Warning: Despite the high density of PVC, avoid prolonged contact with gasoline or oil - this can disrupt the structure of the material and lead to depressurization.
It's worth noting that the manufacturer uses quality fittings that don't rust after the season, pump valves are made in a convenient form factor that allows you to quickly blow air or, conversely, pump the cylinders in the sun, all elements undergo rigorous quality control before assembly.
Overview of popular models and their specifications
The range of the manufacturer is wide enough to meet the needs of different user groups, from compact single variants to serious three-seater vessels, each model has its own unique features. uniquenessFor example, the Comfort series is aimed at anglers who value space, and the Light series is designed for those who carry a boat in a backpack for long distances.
To give you a visual comparison of the technical parameters of the major modifications, we'll give you a table below, which will help you navigate the dimensions and load capacity, which is critical when you're choosing a specific task.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Weight (kg) |
|---|---|---|---|---|
| RiverBoat 280 | 280 | 130 | 350 | 24 |
| RiverBoat 320 | 320 | 145 | 450 | 32 |
| RiverBoat 360 | 360 | 160 | 600 | 41 |
| RiverBoat 390 Pro | 390 | 170 | 750 | 48 |
The most popular model is often the "golden mean". 320th or 360th modificationThey allow two adult fishermen to comfortably fit with all their gear, and larger versions like the 390 Pro already allow for more powerful motors and a more confident feeling in the water.
When choosing a size, it is important to consider not only the number of passengers, but also the storage conditions. When disassembled, even a three-meter boat takes up quite a lot of space in the trunk of a passenger car. Dimensions of packages You should check in advance, especially if you have a compact hatchback.
Installation of attachments and motor
The installation of the power unit and additional equipment requires careful attention. The traverboths are designed to install engines of a certain power, the excess of which is unacceptable, usually on the nameplate or passport indicated the maximum value in horsepower.
The standard screed system or bolt connection is used to fix the motor, depending on the version of the trans board. lower unitTo avoid cavitation or, conversely, excessive water resistance, the angle of inclination is adjusted using a hard screw on the lower unit.
- 🔧 Before installing the motor, make sure that the transom plate is securely fixed in the slots.
- 🚤 Use the safety cable for the motor to exclude its loss when rolling over.
- 🔋 For electric rods and sonars, provide separate mounts on the sides.
☑️ Preparation for engine installation
In addition to the motor, you can attach rod holders, anchor ducks and tables on the sides, and the design of the cylinders allows you to use universal fasteners on Velcro or suction cups, but you should not overload the sides with heavy equipment so as not to disturb the aircraft. centre-up.
⚠️ Warning: Never start the motor out of the water, even for a few seconds, as this will overheat and destroy the impeller cooling pump.
Water Exploitation and Wave Behavior
The boat's behavior on the water is directly dependent on the shape of the cylinders and the type of bottom, and thanks to the keeled shape of the NDND, the Riverboth vessels are excellent at cutting the wave rather than slapping it flat like plywood slug models, which reduces the impact on the passengers' spines and reduces the risk of damage to the hull.
At low speeds, the boat behaves predictably and steadily. When going to planing, it is important to distribute the weight correctly. If the nose is too high, the boat can begin to "scroll" or even turn over when the steering wheel turns abruptly. Optimal differentiation This is achieved by moving passengers or cargo closer to the nose or stern.
Windy weather makes its own adjustments. The large sailing of inflatable tubes requires active oar or steering when driving against the wind, but when using the motor, this problem is solved by increasing thrust.
Secrets of management on a strong wave
When moving towards a high wave, it is recommended to slow down and meet the comb at an angle of 30-45 degrees to soften the impact and avoid splashing the cockpit with water.
These boats are very maneuverable, especially with short-base engines, and the turning radius is minimal, which is appreciated when fishing in reeds or on steep shores, and the main thing is not to make sudden movements with the tiller at high speed.
Care, maintenance and storage of products
The long life of a boat depends not only on the quality of the materials, but also on the proper care. After each foray into the water, especially if it was in a salt water or a muddy river, the boat needs to be rinsed with fresh water, which will wash away the aggressive salts and sand suspension.
Drying is a critical step before packaging, and even the minimum amount of moisture inside the bag can lead to mold and unpleasant odors that are difficult to remove. Complete drying All valves and folds of fabric are required.
- 🧼 For washing, use a soft sponge and soap solution, avoid abrasive brushes.
- 🌡️ Keep the boat away from heaters and direct sunlight.
- 🐀 In a garage or barn, use protective bags or stands to prevent rodents from reaching PVC.
Check the pressure in the cylinders with a pressure gauge regularly. In hot weather, the pressure can rise, and excess air will have to be fired to avoid rupturing the seams. In winter, on the contrary, the pressure drops, and it may require pumping.
Proper drying and storage at temperatures from -20 to +40 degrees ensures the preservation of the elasticity of the material for 10 years or more.
Comparison with competitors and final conclusions
In the context of brands like Flagship, hunter or Mev.RIVERBOT boats look like a worthy competitor, and they often win in price at comparable seam quality, but some competitors may have richer basic equipment, such as having a backpack bag in the kit or more comfortable seats.
The key advantage is the repairability: the repair kit, which comes in the package, allows you to quickly fix a small cut in the field, special glue and patches are held securely even after drying.
So to sum up, it's a pragmatic choice, you pay for functionality and reliability, not a brand, and if you want a workhorse for weekend fishing, this is a good option.
Can I use the boat Riverboth in winter for fishing?
Use is possible, but with limitations: PVC material becomes rigid and fragile in the cold, you need to use special freeze-resistant powders for the bottom and extremely carefully handle inflated cylinders, avoiding impacts on the ice.
What is the maximum weight of the engine on the 320?
For the model 320, a motor up to 5-6 hp is usually recommended. Installation of a more powerful engine (9.9 hp) is possible, but requires caution and experience, since the transom may not withstand vibrations, and the boat will become unstable on turns.
How to properly keep the boat in a pumped state?
Long-term storage in a pumped state is not recommended, especially in a warm room. The air pressure will change with temperature, which will create unnecessary stress in the seams. It is better to keep the boat deflated but dry.
How to glue the boat Riverboth at home?
Use a two-component polyurethane adhesive designed for PVC materials. Moment adhesive for rubber may not provide the proper strength and elasticity of the seam under water loads.