Finding a reliable fishing or hunting boat often leads potential buyers to find a way to find a safe fishing boat. Robinson's official boat siteThis is not accidental, because this brand has been holding a leading position in the inflatable boat market in Russia and CIS countries for many years. Users are looking for information not only about the manufacturer's contacts, but also about the technical nuances that are hidden behind the marketing names of models.
It is important to understand that Robinson Boat Company It's not just a assembler, it's a full-cycle enterprise that uses its own reinforced fabric, and that's often the deciding factor in choosing between multiple competitors, and in this article, we'll look at how to distinguish original products, which models are worth looking at, and where to look for current price lists without intermediary margins.
The company's history goes back more than 25 years, and during that time, the production technology has changed significantly. boat-boat It's a combination of lightness of sports equipment and strength of military samples, and it can be difficult to find reliable information online because of the large number of dealers, so you should focus on proven sources.
⚠️ Attention: There are many clone sites on the Internet offering "exclusive" discounts, and be careful: original products have certificates of conformity and warranty, which may not be valid when purchased from questionable resellers.
The market today offers a huge selection, but Only the boats Robinson series "Taimen" and "Bullet bottlenose" have a unique design bottom with inflatable stringersThis is a key difference that is often overlooked by beginners when comparing only the length and width of cylinders.
Where is the official website and how to find out
The first question that arises from the buyer is where exactly is located. portal Often search results are saturated with advertisements from dealers who position themselves as direct representatives of the plant, and to avoid confusion, you need to pay attention to the domain name and the structure of the information offered.
The official resource usually contains a complete catalog of the entire product line, ranging from single-seat products. "Baby." and ending with heavy motor Frigate.It is also where the fresh spare parts catalogues, inflating schemes and operating instructions written by the plant's engineers, not the shop copywriters, are published.
How to verify the authenticity of the site?
The official website always contains the legal address of the production, company details (LLC "Robinson") and contact telephone numbers of the sales department, which coincide with the data in the warranty card.
It is also worth noting that the official resource has a section with news and reports from tests. If the site offers only the buttons "Buy" and "Buy" but does not have technical documentation or brand history, most likely, you are a regular online store. Service services Support for users is the business card of the manufacturer.
- 🔍 A complete archive of instructions for models of different years of release.
- 🏭 Indication of the real production address in St. Petersburg.
- 📞 Direct hotline phones, not just feedback forms.
- 📄 Publication of quality certificates and patents for unique developments.
Overview of popular models: from "Baby" to "Taimen"
The company's range of products covers almost all the needs of water engines. Robinson-2This two-seater is compact in its assembly and is capable of carrying a motor powerful enough to reach large bodies of water.
For lovers of trophy fishing created a series Taimen.These models have increased load capacity and reinforced bottom, which allows you to feel confident even in strong side wind. The design of the cylinders here optimized for maximum spray resistance, which is critical when fishing with spinning.
The model deserves special attention. "Bullet bottlenose"The wide cockpit makes it easy to put on a wetsuit in the boat, and special cylinder mounts make transportation convenient and safe. Load capacity Here it is brought to the fore, second only to the speed specifications.
⚠️ Note: When choosing a model, consider not only the number of passengers, but also the weight of the equipment. A load capacity of 20-30% will extend the life of PVC and improve driving performance.
Recently, the manufacturer has updated the lineup, adding enhanced versions of the High Pressure These boats are built faster because they don't require floorboards to be laid, and they have better hydrodynamics, but for rocky shores, the classic plywood floorboard is still a more reliable solution.
Production technologies and body materials
The basis of durability of any PVC boats The Robinson Company uses a five-layer reinforced material that is resistant to ultraviolet, fuel and mechanical damage, and the density of the fabric varies from 750 to 1100 g/sq.m. depending on the purpose of the model.
The special technology of gluing the seams ensures the monolithic structure, and unlike many competitors, double-painted gluing is used, which eliminates the possibility of stratification even under extreme loads. Tightness The compartments are checked at the plant under pressure exceeding the working one and a half times.
When storing a boat in winter, do not leave it completely pumped in the cold - a sharp compression of air can damage the seams.
The fittings are also designed for long-term use, and Velcro straps, handles, valves, all of these elements pass reusable tests. Brass valves They are not oxidized by salt water, and reinforced handles allow you to drag a loaded boat through the sand or pebbles without the risk of separation.
| Model | Length, m | Width, m. | Load capacity, kg | Weight, kg |
|---|---|---|---|---|
| Robinson-2 | 2.90 | 1.35 | 400 | 26 |
| Taimenus-2 | 3.20 | 1.45 | 500 | 32 |
| bottlenose | 3.40 | 1.60 | 600 | 38 |
| Baby. | 2.20 | 1.10 | 220 | 14 |
Choosing a transom and preparing for the installation of the motor
The key element for motorization is the hinged turretIn Robinson boats, it is made of moisture-resistant plywood coated with special enamel and reinforced with metal linings, and the design allows for engines up to 10-15 hp depending on the model.
It is important to adjust the height of the engine installation correctly. Too high lift will lead to cavitation and overheating, too low will lead to loss of speed and throwing water into the cockpit. Optimal depth The immersion of the anti-cavitation plate should be 1-2 cm below the bottom of the boat.
☑️ Check before the first launch
For heavy motors, it is recommended to use additional transom insurance with special belts that come with a complete or purchased separately, which will prevent engine loss in the event of a break in the fasteners or a strong shock to the wave. Security It's not good to be in the water.
Operation and care of PVC boats
The life of your boat depends on how you care for it. After every fishing trip, especially in salt water, the boat must be rinsed with fresh water. The salt crystallizes and can damage the fabric structure and fittings with prolonged exposure.
Drying is a must before packaging, and even a small amount of moisture inside the case when stored can lead to mold that is extremely difficult to remove from the body. reinforced PVCDrying is better in the shade, as direct sunlight when heated can temporarily increase the pressure in the cylinders.
⚠️ Warning: Never dry a boat on hot asphalt or concrete on a hot day – surface temperatures may exceed those allowed for glue and fabric, causing seam strain.
Check the pressure in the cylinders regularly.under-inflation) causes deformation of the boat's geometry, reduced speed and increased fuel consumption, and pumping is dangerous in sunny weather due to thermal expansion of air.
Proper storage in a dry, cool place in a straightened form increases the life of the Robinson boat to 10-15 years or more.
Repair and maintenance: what can be done on your own
Despite the high strength, punctures and cuts happen to everyone. For rapid repairs, there is always a belt kit; minor damage can be repaired with a special glue and patch made of the same fabric. It is important to degrease the surface before applying the glue and let it dry according to the instructions.
More serious damage, such as joints or valve replacement, is best left to the professionals at an authorized center, but basic knowledge helps to assess the magnitude of the disaster in the field. Valve repair It is often required due to the ingress of sand or small debris between moving parts.
- 🛠️ For temporary repairs, use a soap solution to look for leaks.
- 🛠️ Cut the patch with rounded corners so that it does not bend over time.
- 🛠️ Use only glue designed for PVC materials, not superglue.
- 🛠️ Before gluing, warm the surface with a hair dryer to 40-50 degrees for better adhesion.
Replacing the inflatable floor or stringers is a complex operation that requires special equipment to press the seams, so keep the bottom from sharp stones and driftwood using a protective mat when pulling the boat ashore. Prevention It is always cheaper and easier than a major repair.
Frequently Asked Questions (FAQ)
Does the website guarantee the best price?
Not always, the official website records the recommended retail price (RRC), but large dealers, buying large lots, can make discounts that are lower than the price on the manufacturer's website, it is worth comparing offers, but beware of suspiciously low prices.
Can I use Robinson's boat in winter?
The PVC material retains elasticity to -30°C, but in the cold it becomes rigid. Exploitation is possible, but requires caution: the fabric is easier to damage, and the plastic tans. Keeping the boat in the cold is not recommended.
How often should I pump the boat in the sun?
In the bright sun, the pressure inside the cylinders increases. If the boat was pumped in the morning, you may need to blow some air by lunch to prevent overvoltage of the seams.
Do Robinson boats have an inflatable floor?
Yes, many modern models, such as the Taimen-2M or the bottlenose bottlenose, come with a high-pressure inflatable floor (HPD), which makes assembly faster and the stroke softer. However, classic versions with plywood peyol are also produced.