Boat. Volzhanka 46 It is one of the most recognizable models among domestic PVC boats, trusted by both beginners and experienced water-engineers, and its balanced dimensions, robust design and affordable price make it the leader in sales in its segment. But what exactly is behind this name? Why do thousands of owners choose this model, refusing to import analogues?

In this article, we will discuss specificationcompare Volzhanka 46 We'll talk to our competitors, we'll talk about the nuances of operation, and we'll give you practical advice on how to choose a complete set. Real feedback from owners If you're looking at the first boat or thinking about replacing the old one, this material will help you make an informed decision.

Technical specifications of the boat Volzhanka 46What you need to know before buying

Before we talk about the benefits, let’s analyze the “dry” numbers. Volzhanka 46 belongs to the class of inflatable boats with a hard transom, which allows you to install outboard motors with a capacity of up to 15 hp But the real tests show that when you balance it properly, the boat is confidently holding and 20-strong The engine, although this requires additional reinforcement of the transom.

The main parameters of the model:

  • 📏 Length: 4.6 m (in disassembled form fits in the trunk of most sedans).
  • 📐 Width: 1.85 m is optimal for stability and maneuverability.
  • 🔄 Weight: 58-62 kg (depending on the configuration), which allows you to carry the boat together.
  • 👥 Passenger capacity: up to 5 people (but comfortably 3-4 with cargo).
  • 💧 Load capacity: 600 kg (passport), actually - up to 700 kg with a uniform distribution.
  • 🛡️ Material: PVC 1100 g/m2 (enhanced version - 1200 g/m2).

The key feature of the model is a reinforced keel with linings of hypoallergenic PVC, which reduces the “chat” on the wave and improves driving performance. It's markedly different. Volzhanka 46 From budget boats without a keel, where every gust of wind turns swimming into a seasickness test.

📊 What purpose do you plan to use the boat for?
Fishing
Tourism and travel
Hunting
Sporting events
Other

Advantages and disadvantages: honest analysis

Like any boat, Volzhanka 46 It has strengths and weaknesses, and we'll start with the advantages that owners have.

  • ⚡ Universality: Suitable for rivers, lakes and coastal zone of the sea (at agitation up to 2 points).
  • 💰 Price/quality: 1.5-2 times cheaper than imported analogues with comparable specifications.
  • 🔧 Repairability: PVC is easily repaired even in the field with the help of standard remixes.
  • 🚤 Sustainability: Thanks to the wide bottom and keel, the boat does not capsize even during sharp turns.

Now on the downsides – it is important to consider them before buying:

  • ⚠️ Weight: 60+ kg is a bit heavy for one person, especially when carried over long distances.
  • 🔥 PVC heating: The sun is in the sun, and the sun is in the water, and the sun is in the water.
  • 🛠️ Tranza: The standard version requires revision for engines over 15 hp (amplification with aluminum plates).
⚠️ Attention: When operating with a motor more powerful than 15 hp, be sure to strengthen the transom and check the mounts every 10 hours, otherwise you risk losing the screw or damage the stern on the wave.

Comparison with competitors: Volzhanka 46 vs. other boats

To understand how Volzhanka 46 Compare it to the popular models of the same class:

Parameter Volzhanka 46 Flagship 450 Kazanka 460 Honda Honwave T40
Length, m 4,6 4,5 4,6 4,1
Max, engine power, hp. 15 (up to 20 with refinement) 15 20 20
Weight, kg 58–62 65 70 53
PVC material, g/m2 1100–1200 1100 1200 900
Price, thousand rubles (2026) 180–220 200–240 230–270 350–400

As you can see from the table, Volzhanka 46 It's a win-win in terms of price/quality, especially if you consider the possibility of upgrades. Kazanka 460 It's more powerful out of the box, but it costs 30 to 40 percent more. Honda Honwave, despite the brand, loses in strength of PVC and load capacity.

💡

If you plan to use a boat with an engine of 18-20 hp, pay attention to the modification. Volzhanka 46M It's 15 to 20 percent more expensive, but it's going to eliminate the need for improvement.

Components and accessories: what to choose for comfortable operation

Basic version Voljana 46 It includes a boat, a pump, paddles, a remix and a bag for transportation, but you will need additional accessories to make it fully operational.

Reinforced slant (aluminum or plywood)

Anchor weighing 3-5 kg with a rope of 10-15 m

Pump with a manometer (optimally - electric)

Life jackets (by number of passengers)

Seamless containers for things--

Among the popular options:

  • 🛡️ Reinforced floor: sleigh made of marine plywood or aluminum (increase rigidity and comfort).
  • 🔋 Electrical equipment: sonar, navigator, backlight (especially important for night fishing).
  • 🚣 Tent: protects from sun and rain, prolongs the life of PVC.
  • 🔧 Train with a motor stove: It is required for motors over 15 hp.

The cost of a complete set can reach 300-350 thousand rubles, but it is an investment in safety and durability. For example, quality sleigh increases the life of the bottom of the boat by 2-3 times, preventing PVC rubbing.

How to save on accessories?

Many items (such as an anchor or a pump) can be bought in good condition. Keep an eye out for ads on thematic forums or in groups of fishermen. It is also profitable to order accessories in bulk with friends - some stores give discounts from 10% when buying for the amount of 50 thousand rubles.

Operation and maintenance: how to extend the life of the boat

Term of service Voljana 46 It depends on the right care. Here are the key rules:

  1. Wash after each exit: fresh water removes salt, sand and dirt that destroy PVC. Use a soft brush and special detergents (for example, Star brite Vinyl Cleaner).
  2. Storage: In a cool place (ideally suspended on a wall or in a cover), avoid direct sunlight and temperatures above +40 °C.
  3. Pressure check: optimal value. 250–270 mbar (The stainless stains are more easily worn).
  4. Valve lubrication: Once a season, apply silicone lubricant to prevent "feeling."
⚠️ Attention: Never use acetone, gasoline or solvents to clean a boat! They break down PVC, causing microcracks. WD-40 (Put for 5-10 minutes, then flush).

In winter, the boat should be prepared for conservation:

  • ❄️ Check for punctures and seal them.
  • ❄️ Treat PVC with a protective spray (for example, 303 Aerospace Protectant).
  • ❄️ Store in a dry room with a temperature not lower than -10 C (in frost, PVC loses elasticity).
💡

Regular maintenance extends the life of the boat to 10-12 years, and neglect of operating rules reduces it to 3-5 years, even when used carefully.

Modifications and tuning: how to improve Volzhanka 46 hand-handed

One of the big advantages of this model is that it's possible to make improvements, and here are the most popular tuning options:

1. Trans reinforcement for powerful motors

For the installation of the motor 18-20 hp. will require:

  • Install an aluminum plate with a thickness of 5-6 mm under the transom.
  • Strengthen the fastenings with nut bolts (at least 4 points).
  • Add stainless steel stainless steel slashes to distribute the load.

Improvement of driving performance

To improve speed and controllability:

  • Install. hydrofoil (anti-cavitation stove) on the motor.
  • Replace the standard slant with rib-stiff.
  • Balance the load: the motor should be shifted to the stern 5-10 cm from the center.

3. Enhancing comfort

For long exits:

  • Install. soft-seat adjustable height.
  • Add in. fishing-rod and gear-maker.
  • Plug the bottom slip-proof (for example, SeaDek).

An example of successful tuning is the story of the owner from the suburbs, who for 2 years turned the standard tuning. Volzhanka 46 motorboat Yamaha 20 hpIt cost about 150 thousand rubles, but the result is speed up to 45 km / h and comfort on the wave up to 1 m.

Reviews of owners: real experience of operation

To make an objective opinion, we analyzed the feedback from the forums (see below).Fish-haus.ru, BoatMaster.ru) and social media groups, here are typical opinions:

Positive:

  • 👍 « I bought it in 2020, in 3 seasons, no punctures. Mercury 15 hp - pulls 4 people + cargo without problems. - Alexey, Nizhny Novgorod
  • 👍 « For your price, it's the best option. Flagship - Voljana PVC is thicker, and the keel is better on course. (Igor, Krasnoyarsk)

Negative:

  • 👎 « The slug is weak after a year of operation with Tohatsu 18bhp We had to strengthen it. (Dmitry, St. Petersburg)
  • 👎 « In the heat, PVC is soft as plasticine. Without slates, the bottom sags, you have to pump every 2 hours.

The overall rating of the model by reviews - 4.5 out of 5The main complaints are related to the need for improvements to the powerful engines and the sensitivity of PVC to high temperatures, but 90% of owners are willing to recommend the boat to friends.

FAQ: Answers to Frequent Questions

Can I use it? Volzhanka 46 At sea?

Yes, but only in the coastal zone, when you're up to 2, and the boat is not designed for the high seas, there's no stability, no buoyancy, and you have to install a motor with at least a power of 2. 15 hp And reinforce the transom.

How long does it take to assemble/disassemble a boat?

If you have a pump with a pressure gauge, it takes 15-20 minutes (two) to assemble, 10-15 minutes to disassemble, and advice: exercise at home before you first exit, so you don't waste time on water.

Which motor is better for this boat?

Best options:

  • Budget: Hidea 15 hp. (Chinese, but reliable).
  • Middle class: Tohatsu MFS20 (20 hp, Japanese quality).
  • Premium: Yamaha F20 (quiet, economical, but expensive).

Avoid long-dadewood motors – they put extra strain on the transom.

Do I need to register with GIMS for Voljana 46?

Yes, if you install a power motor over 10.88 hp (according to the order of the Ministry of Emergency Situations No. 444 of 2020) For motors up to 10.88 hp registration is not required, but you must have management certificate (If the engine is more powerful than 5 hp)

How to transport a boat by car?

The best ways to do this are:

  • In the trunk (if the car is large, for example, Lada Largus. or Kia Ceed SW).
  • On the roof (using special fasteners and cover).
  • On the trailer (convenient if the boat is assembled with the engine).

Important: when transporting on the roof, the speed should not exceed 90 km/hOtherwise, you risk damaging the PVC.