The decision to purchase an electric motor for a swimming vehicle is often a turning point for the angler or tourist, and the silence of the course, the absence of vibration and exhaust gases, dramatically change the perception of the fishing process. Haswing Protruar 1.0 It stands out on the market as a reliable model, able to confidently drive a boat even in the presence of a weak current.
Many water motors are looking for an opportunity outboard motor haswing protruar 1.0 12v It's a very versatile unit, which combines well with PVC inflatable boats and small aluminum boats, and is designed to be used for long periods of freshwater, making it a popular choice for small boat owners.
When choosing a power plant, it is important to consider not only the price, but also the real indicators of traction. Traction force The 55-pound (about 25 kg) system allows two adults to move comfortably with full gear, which is the optimal balance between power and power consumption, which is critical for 12-volt systems.
Design features of the Protruar 1.0 model
Haswing engineers have focused on ergonomics and material strength. stainless steelIt's a corrosion-proof system, even in the event of accidental scratches, and unlike cheaper ones, it uses high-quality wire insulation and sealed connections to keep the electrical circuit from getting moisture.
The control is done through a telescopic humcle that can be pushed to the desired length. Protruar 1.0 The tiller is equipped with a convenient handle with a rotating mechanism, which ensures smooth change in speed and direction of movement without jerking.
An important element of the design is screw It's designed to minimize cavitation and noise, which is especially appreciated when fishing carefully, and it's protected from overgrown grass, although in dense algae, the efficiency of any electric motor is reduced.
⚠️ Warning: When installing the motor, make sure the screw is fully submerged in water, but not too deep to avoid excessive drag and overheating of the windings.
Technical specifications and compatibility
To understand the capabilities of the device, you need to look at its data-sheet figures. 12 volts.The current consumption is directly dependent on the speed and load of the propeller.
Below is a table showing the main parameters that will help you decide on the purchase:
| Parameter | Meaning | Note |
|---|---|---|
| Tension. | 12V | DC current |
| Plunge | 55 lbs (25 kg) | Maximum 5 speeds |
| Motor weight | 9.8 kg | Without ACB. |
| The length of lower unit | 76 cm | Telescopic barbell |
| Speeds. | 5 forward / 3 back / 3 back | Step-shifting |
Compatibility Haswing Protruar The engine is high with most boats from 3 to 5 meters long. However, for hard bottom inflatable vessels (HBBV) or flat-transe aluminum boats, the weight of the entire structure should be taken into account. The motor is attached to a transom plate, so the strength of the transom should be sufficient.
Selection of battery
The efficiency of the electric motor depends on the quality of the power source. The normal starter car battery is not designed for long-term operation under load. motorboat Special traction batteries (Deep Cycle) are needed to withstand deep discharge.
When planning a fishing trip, it is important to calculate the approximate battery life. If you use a 100-Ah battery, at average speeds, the engine consumes about 20-30 Amps, which means that there is enough energy to last 3-4 hours of active travel.
To increase the time of autonomous swimming, use lithium-iron-phosphate (LiFePO4) batteries. They are 2-3 times lighter than lead counterparts and give away almost 100% of their capacity without harming chemistry.
Don't forget to protect the battery. Move the heavy lead battery in a special sealed box, which will prevent tipping, splashing of salt water on the terminals and gases when charging directly in the boat.
Installation and preparation for the first launch
Installation process Protruar 1.0 The engine is fixed by rods that have soft linings to protect the material of the boat. Make sure the surfaces are clean and dry before you puff.
☑️ Pre-launch checks
The battery is connected via a power cable with a built-in thermal fuse, the length of the cable allows the battery to be placed on the bottom of the boat for better weighting, and the center of gravity shifts downwards, which increases the stability of the vessel on the water.
The first run is better done in shallow water or off the coast. Check all speeds, including reverse, make sure that the battery indicator (if you have it on your equipment or installed separately) responds to the change in load.
⚠️ Warning: Never turn on the motor at full power unless the propeller is submerged in water. Dry operation can cause the stator windings to overheat and melt.
Operation under different conditions
Using an electric motor on the current requires the right tactics. Unlike gasoline, the electrician does not have a power reserve for a sharp jerk. zigzag.
In windy weather, the sailing of a boat becomes the main enemy of the electric motor, and it is important to place the cargo in the boat correctly. Haswing Protruar Can not cope with the wind, you may need to reduce sailing or anchor.
The secret to saving charge
Use low gears (1-2 speed) for trolling, on which the motor consumes a minimum current (5-10A), which allows you to spend a whole day on the water even with a small battery.
Winter storage also has its own peculiarities: after the season, you need to thoroughly wash the engine with fresh water, especially if you were operating in salt water, lubricate the moving parts and store the device in a vertical position in a dry room.
Frequently Asked Questions (FAQ)
Can I use Haswing Protruar 1.0 in salt water?
The model is designed primarily for fresh water, the corrosion resistance of the materials is medium, operation in salt water is possible, but requires a mandatory and thorough washing with fresh water after each exit and additional anti-corrosion treatment.
Which battery is better for this motor?
The optimal choice will be traction gel (GEL) or AGM batteries with a capacity of 90 to 120 Ah. They provide stable voltage under load and withstand many charge-discharge cycles.
Do I need to register a boat with an electric motor in GIMS?
According to the current legislation of the Russian Federation, registration is required if the engine power exceeds 8 kW (about 10.8 hp) OR if the weight of the equipped vessel is more than 200 kg. Electric motors with a capacity of up to 1 hp (about 0.7 kW) are not subject to registration, but the rules may change, so it is worth clarifying the current standards.
What to do if the engine loses power?
First, check the battery power. If the battery is charged, check the screw for winding fishing lines or algae, and the cause may be oxidation of contacts or wear of engine brushes (maintenance required).
In summary, it can be said that Haswing Protruar 1.0 It is one of the best offers in its price segment for light and medium-sized boats, and its reliability and ease of maintenance make it an excellent choice for both beginners and experienced water-engineers.
Proper selection of the battery and regular maintenance after the season - the key to long service of the electric motor and your safety on the water.