Choosing a power plant for a small boat often becomes a dilemma between a noisy gasoline unit and a quiet electric counterpart. Boat electric motor HDX 32L This model is a compromise solution that allows you to forget about the smell of fuel and complex maintenance of the internal combustion engine. This model is positioned as a universal option for fishing, cruising or using as an auxiliary motor on large bodies of water where silence is required.
Owners of inflatable boats and small boats are increasingly paying attention to electric traction because of its environmental friendliness and ease of management. HDX 32L It has a DC motor with powerful neodymium magnets, which provides high efficiency and excellent traction even at low revs. Unlike gasoline counterparts, there are no vibrations that can tire during long transitions, and the start is instantaneous by turning the handle.
The main advantage of this model is its reliability and adaptation to harsh operating conditions.
Composite dayvint and screw are not afraid of impacts on underwater obstacles, which is critical when driving in shallow water or overgrown with algae areas.
Many anglers choose this modification for the possibility of a silent approach to the parking of the fish, when any burst or sound of the engine can spoil the entire catch.
Technical specifications and design features
Model HDX 32L belongs to the class of engines with a thrust of 32 pounds, which in terms of the metric system is approximately 14.5 kg of thrust. shaft It is made of stainless steel and has a length that is optimal for most transom PVC boats, and the body is made of a durable composite material that is resistant to corrosion and mechanical damage, which significantly extends the life of the device.
Speed control is carried out smoothly, without step-by-step switching, which allows you to choose the driving mode accurately. tiller It has a telescopic design that allows it to be adjusted in the range of 80 to 105 cm, which provides comfort for the operator of any size. The system of protection against overheating and locking of the screw makes operation safe even in extreme conditions.
For maximum life of the datawit, lubricate the coils with a special silicone lubricant every 10-15 hours of operation, especially after operation in salt water.
It is important to note the presence of a battery charge indicator that helps monitor the remaining energy and plan the return to base. The nominal voltage of the system is 12 volts.The engine is the standard for most cars and boats, and it weighs about 9.5 kg, making it easy enough to install by a single person, but also massive enough to run on a steady wavelength.
Compilation and ergonomics of management
Buying. HDX 32LThe user receives a fully ready-to-work kit that does not require additional purchases for basic operation. Ergonomics of the handle The wheel is designed to minimize hand fatigue with prolonged one-handed operation, and the tilt mechanism allows the screw to change its dip angle quickly, which is convenient when passing through shallow water or when transporting.
☑️ Checking the completeness when buying
Fixing to the transom is carried out using a powerful strubbing mechanism that reliably fixes the motor even at high speeds. Control panel It is equipped with a rotary speed switch and an emergency stop button (depending on the year of release and modification), the battery status indicator is designed in the form of an LED scale that is well readable even in bright sunlight.
- 🔋 Charge indicator: 5 LED scale showing the current battery voltage level.
- ⚙️ Adjustment of the dipping: mechanism of fixing the inclination angle of the dataset in several positions.
- 🛡️ Defense: built-in automatic fuse against overloads on current.
- 🔄 Reverse: Instantly switch the direction of rotation of the screw for maneuvering.
⚠️ Attention: When installing the motor, make sure that the rod is clamped on an even part of the transom. If the transom has a bending or irregularity, use an additional wooden pad to avoid skewing the datawite and vibration.
Efficiency and energy consumption in water
One of the main issues when choosing an electric motor is the real range. HDX 32L The engine is very efficient when using traction batteries with a capacity of 100 Ah. At the first speed, which is most often used for trolling, the engine consumes about 10-12 Amps, which allows you to fish for 8-10 hours without recharging. Maximum speed It is achieved in the fifth gear, where the current consumption can reach 30-35 Amps, significantly reducing battery life.
The efficiency of the screw also plays an important role in energy efficiency. The three-bladed screw that comes with the kit has the optimal step for working with low power. Management system This allows you to avoid sudden surges in current at start, which saves the battery and prolongs its life, and when you move against the current or strong wind, energy consumption naturally increases, and the operator has to use average speeds more often.
| Mode of work | Speed (km/h)* | Current (A) | Working hours (100 Ah) |
|---|---|---|---|
| 1 speed (Trolling) | 3-4 | 10-12 | 8:9 hours |
| 3 speed (Cruising) | 6-7 | 18-20 | 4.5-5 hours |
| 5 speed (Maximum) | 9-10 | 30-35 | 2.5-3 hours |
* Speed is indicated approximately for a PVC boat 3.2-3.6 m long with a full load (2 man + equipment).
Features of operation in different conditions
Use of use HDX electric motor It can be used not only in fresh water, but also in low-salt water conditions, provided that the engine is washed in a timely manner. The design of the engine involves operating in the temperature range from -10 to +40 degrees Celsius, but extremely low temperatures can temporarily reduce battery capacity. In summer heat, the engine cooling system (natural, through washing with water) copes effectively, but with prolonged operation at maximum speeds "dry" (out of water), windings can overheat.
Can I use the motor in the sea?
Yes, you can, but only in low salinity waters and provided that fresh water is washed immediately after each exit, salt water aggressively affects the metal parts of the datawite and fasteners, so regular maintenance is critical.
When driving over overgrown algae areas HDX 32L He's acting confident. Weed winding The propeller is less common than some competitors, due to the shape of the screw and the protective casing. However, if the algae are wound, you should not try to remove them on the go or at shallow depths - it is better to turn off the motor, lift the diewhint and clean the screw manually so as not to damage the oss.
- 🌊 Excitement: confidently holds the course at a wave of up to 0.5 meters, then begins the loss of the efficiency of the screw (cavitation).
- 🌿 Algae: Three-bladed screw is less prone to fouling, but requires periodic cleaning.
- ❄️ Winter: allowable operation in the presence of wormwood, but storage only at a plus temperature.
⚠️ Attention: Never turn on the motor unless the daywhint is submerged in water. Drying even for 10-15 seconds can cause the O-rings to break down and water to enter the datawhite, causing corrosion and failure.
Maintenance and preparation for winter storage
In order to motorboat After every fishing, especially in dirty or salty water, it is recommended to rinse the daywhint and screw with fresh water. Periodically check the condition of the control cable and contacts going to the battery, as oxidation of the contacts can lead to a voltage drop and loss of power.
The main enemy of the electric motor is not water, but poor contact in the power chain and the lack of lubrication on moving mechanical parts.
Before long-term storage, for example, for the winter, you need to remove the motor from the boat, clean it of dirt and apply conservation grease to metal parts. Battery It should be disconnected, fully charged and stored in a cool dry place, periodically (once a month) recharge it to prevent sulphation of the plates. The mechanism of switching speeds is also desirable to lubricate with a special lubricant to prevent acidification.
The order of conservation for the winter:1. Rinse the daywint with fresh water.
2. Remove the screw and lubricate the shaft.
3. Treat metal surfaces WD-40 or analog.
4. Charge the battery to 100% and remove it in heat.
5. Keep the motor in a vertical position.
Comparison with competitors and final conclusions
Other models in its price segment HDX 32L He looks like a worthy competitor. Chinese analogues Often inferior in terms of build and materials of the data, and more expensive brands may not offer such a kit for the same price, the main trump card is the availability of spare parts and simplicity of construction, which is easy to maintain yourself without the involvement of specialists of service centers.
The motor is ideal for owners of boats up to 4 meters long who appreciate peace and comfort. Absence of exhaust gases It allows it to be used even in enclosed waters and protected areas, where strict environmental regulations apply, making it attractive not only for anglers, but also for nature lovers and ecotourists.
Should I buy a used motor?
Buying a used electric motor is only justified if you can check it in operation. Be sure to check the backlash of the data, the operation of the speed switch and the absence of extraneous noise when the screw is rotating.
In conclusion, it may be said that HDX 32L It's a reliable, efficient engine that justifies the investment, and it doesn't claim to be a speed record, but it does a great job of getting the fisherman to the fishing point, making sure that you can move quietly, and then back, and if you take care of it and maintain it on time, it's going to be a loyal water assistant for years to come.
Which battery is better for HDX 32L?
For this motor, the optimal choice will be a traction battery such as AGM or GEL with a capacity of 100 Ah. Starter car batteries are not recommended to use, as they are not designed for long-term operation at low discharge currents and can quickly fail. Lithium batteries (LiFePO4) will be lighter and more compact, but their cost is much higher.
Does the motor develop maximum speed with a screw from the kit?
Yes, the regular three-blade propeller is engineered to balance thrust and speed, and replacing the propeller with a higher speed one can cause the engine to overload and drop in efficiency, because the motor has a fixed power, and experiments with propellers are possible, but require careful monitoring of current.
Can I charge the battery directly on the boat?
Charging the battery without removing it from the boat, you can only if it is in a sealed case and protected from water and splashes. However, for safety and conservation of battery life, experts recommend removing the battery and charging it in a dry, ventilated room using an automatic charger.
What to do if the engine loses power?
The power loss is most often due to battery discharge or contact oxidation. Check the voltage on the battery terminals under load. If the battery is fine, check the cable contacts and the connection points to the motor. Also, power can fall when the screw is heavily fouled with algae.