The power selection plant for small swimming vehicles in recent years has undergone a dramatic change. electric Among the many brands that have filled the market, the Chinese company Hidea stands out, which has managed to offer a balance between affordable price and acceptable build quality.
This brand was initially famous for its copies of outboard motors Tohatsu, but in the segment of electrics engineers went their own way, creating a line focused on the mass consumer. Hidea electric outboard It attracts attention not only for the cost, but also for the availability of modern features such as digital control and overload protection, which is rare in the budget segment.
In this article, we will discuss in detail the technical features, nuances of operation and the real capabilities of these devices. Hidea boat-powered electric motor This can be the perfect solution for your PVC boat or small boat, and what features are worth paying close attention to before buying.
⚠️ Note: When choosing a model, take into account not only the declared thrust, but also the real capacity of your battery, since working at maximum speeds can reduce the time of autonomous swimming in half.
Technical specifications and model range
The manufacturer's model range covers a wide range of needs, from miniature motors for inflatable boats to powerful units for boats. tractionThe thrust range, measured in pounds (lbs), is the industry standard, and you can find models with thrusts between 30 and 112 pounds in the catalog, which allows you to choose the best option for the displacement of the vessel.
Structurally, all devices are made of composite materials that are resistant to corrosion and mechanical damage. telescopicThis is a system that allows you to adjust the depth of the propeller and the total length of the day-woot, and this is especially true for boats with a transom of unusual height.
- 🔋 Nominal voltage: 12V, 24V or 36V depending on the power of the model.
- ⚖️ Traction strength: ranges from 34 lbs to 112 lbs in the top versions.
- 🌊 Speeds: usually 5 forward and 3 backward (reverse).
- 🛡️ Protection class: IP67, which guarantees submerged operation.
It is worth noting that motor-power The 36-volt models have significantly higher energy consumption and are capable of higher speeds, but they require the assembly of a three-battery battery pack, which increases the weight and dimensions of the structure.
Advantages of electric traction Hidea over gasoline analogues
The transition to electricity is dictated not only by the environmental agenda, but also by practical benefits. Absence of vibration And noise is the big deal that spinning anglers and trollers have appreciated, and silent motion allows you to sneak up on a careful fish without scaring it away with the internal combustion engine.
Besides, electric motor Hidea It doesn't require any complicated maintenance. It doesn't require changing oil, filters, candles or belts, and all prevention is just washing with fresh water after use in a salty environment and checking the screw for algae winding.
⚠️ WARNING: Despite the absence of exhaust gases, do not store the battery in a fully discharged state, as this can lead to irreversible sulfation of the plates.
The financial aspect is also important: the cost of an hour of operation on electricity is several times lower than on gasoline, especially when using the energy of solar panels to charge batteries in the country or in the garage. Engine resource It is calculated in thousands of motor hours, since there is practically nothing to wear in the electrical circuit, except bearings and brushes (in collector models).
Use lithium (LiFePO4) batteries instead of lead-acid batteries: they are lighter, charge faster and give a more stable voltage until full discharge, keeping the boat speed constant.
Instructions for installation and preparation for work
Installation of the device on the transom does not require special skills or tools. The design of the strubbine allows you to fix the engine on boats with a transom thickness of up to 50 mm. Before installation, you need to make sure that the surface of the transom is clean and smooth to avoid distortions.
The process of preparing for the release to the water is as follows:
☑️ Preparations for first launch
- Set the motor on the transom and tighten the locking screws.
- Connect the battery terminals, observing the polarity (+ to +, - to -).
- Drop the lower unit into the water to the characteristic mark on the lower unit.
- Smoothly turn the romple to turn on the motor.
It's important to adjust the depth of the dive, and if the propeller works too close to the surface, it will cause cavitation and air vortexes, which will cause loss of traction, and if it's too deep, water resistance will increase. Optimal position - when the propeller is about 15-20 cm under the keel of the boat.
| Parameter | Model 36 lbs | Model 55 lbs | Model 80 lbs |
|---|---|---|---|
| Tension. | 12B | 12B | 24B |
| Weight. | ~7.5 kg | ~9.2 kg | ~13.5 kg |
| Current consumption (max) | 32 A | 52 A | 65 A |
| Recommended boat | PVC up to 2.5 m | PVC up to 3.5 m | Boat to 4.5m |
Features of operation in different conditions
Use of use Hidea electric motor It is possible in both fresh and salt water, but the aggressive environment requires increased attention. After each outing, the device must be thoroughly washed with fresh water, paying special attention to the electrical contacts and mobile connections of the pump.
In high wind or current conditions, the efficiency of the electric motor may decrease. maximum transmissionAlthough the water cooling system is effective, prolonged work at the limit of capabilities in hot weather can cause the thermal protection to go off.
Winter use also has its nuances: Lithium-ion and gel batteries lose capacity in the cold, so they should be kept warm until the moment they get on the water. The engine itself is cold, but the lubrication in the gearbox can thicken, so the first minutes of work should be spent at low speeds.
What happens if the engine stops developing full power?
Most often, the cause is oxidation of the battery contacts or discharge of one of the batteries in the serial circuit (for 24/36V systems).
Comparison with competitors and pricing
There are several big players in the market, like Minn Kota and Watersnake, compared to the American counterparts. Hidea boat-powered electric motor It is a great value proposition, offering similar functionality at 60-70% of the market leader’s cost, but Hidea’s plastics and casting quality may be inferior to top brands in tactile sensations.
If you look at Chinese competitors like Raymarine or cheap nounaemes, Hidea is in the middle, and it's already in place digital protection systems, and it's using better magnets in the stator, which provides stable traction. Price of the device It pays off for 2-3 seasons of active fishing compared to the cost of gasoline.
When choosing a service center in your area, the brand is growing in popularity and finding parts or a consultant is easier than with lesser-known brands. The manufacturer's warranty is usually 1 year, which is the standard for this category of products.
⚠️ Note: When buying, pay attention to the year of release marking, as older warehouse models may have dried lubricant in the gearbox, which is better replaced before the first launch.
Hidea is the best choice for those who want to get the functionality of expensive brands without overpaying for marketing, but are ready to put up with a slightly simpler plastic case.
Frequently Asked Questions (FAQ)
Which battery is best for a Hidea engine?
For models up to 55 lbs, traction AGM or GEL batteries with a capacity of 100 Ah are ideal. For powerful engines on 24V and 36V, it is better to use lithium assemblies (LiFePO4), since they are lighter and give current more stably.
Can I use the motor in salt water?
Yes, the design involves seawater, but a must-wash with fresh water after each use to prevent corrosion of metal parts and electrical contacts.
How fast will the boat be moving?
Speed depends on the weight of the boat, the cargo and the wind. On average, a 55 lbs motor accelerates a PVC boat with one angler to 5-7 km / h. The trolling speed is usually 2-3 km / h.
Do I need to register a boat with an electric motor in GIMS?
According to the current legislation of the Russian Federation, small-sized vessels with an electric motor up to 8 kW (about 10 hp) do not require registration if their weight does not exceed 200 kg.
How to store the engine in winter?
The motor should be stored in a dry room at a plus temperature. The battery should be removed, fully charged and placed on a control charger or recharged every 2-3 months.