Modern fishing and water recreation are undergoing dramatic changes due to the introduction of advanced technologies. More and more boat owners are turning to electric alternatives to traditional gasoline units. outboard motor battery Greenworks It is a leader, offering users a unique combination of power and environmental friendliness.
The elimination of fuel offers new opportunities for fishermen and tourists; the silent movement on the water allows you to sneak up on cautious fish without scaring them with vibrations and the smell of exhaust gases; and the lack of the need for regular change of oil and filters makes it much easier to maintain equipment.
Greenworks, known for its garden tools, has successfully moved lithium-ion battery technology into the marine segment, allowing for long distances on a single charge, which was previously the sole domain of ICE, and why this brand is becoming the number one choice for PVC boats and small boats.
Advantages of electric traction over gasoline analogues
The main argument in favor of switching to electricity is environmental cleanliness The absence of carbon dioxide emissions and gasoline vapor makes riding safe for the health of passengers and the environment, especially in water bodies in protected areas, where there are strict restrictions.
The second important factor is the noise level. Electric motors Greenworks They're almost silent, unlike the roaring two-stroke engines, and not only does it make you feel comfortable in a boat, it also makes you hear the sounds of nature, which is something that people who love quiet hunting appreciate.
- 🔋 Instant start in any weather without the need to warm up the engine.
- 🔧 Minimum maintenance that does not require complex tools.
- 💰 Much lower cost of operation in terms of motohour.
- 🌊 No risk of water pollution with fuel-oil mixture.
It's also worth noting the vibration. The electric shaft rotates smoothly, transmitting minimal vibrations to the boat hull, which reduces the angler's fatigue in a day and reduces the load on the vessel's fasteners, which for many users becomes the deciding parameter.
⚠️ Warning: Despite the high Protection rating, electric motors are not designed to work at full gas for long periods in the planing mode of heavy boats.
Overview of the Greenworks model range for boats
The brand range includes solutions for various types of floating craft. outboard motor battery Greenworks It comes in several versions, differing in length and thrust strength, the most popular models with thrust from 40 to 55 pounds, which are ideal for standard inflatable boats.
The motors are designed with corrosion-resistant composite materials, critical for use in salt water, where conventional metals quickly become unusable, plastic cells do not rust, and aluminum parts are coated with special protective compounds.
Special attention should be paid to the mounting system: universal transom clamp allows you to install the unit on boats with different thicknesses of the side, the adjustment of the depth of the screw immersion is carried out quickly and reliably fixed, which prevents cavitation when moving.
Technical specifications and productivity
When choosing a model, you need to pay attention to the voltage of the battery platform. Greenworks uses standardized batteries, which allows you to use one set of batteries for various brand tools, which saves budget and simplifies the logistics of charging.
The speed of rotation of the screw is regulated stepwise or smoothly, depending on the specific model. Speed controller It's protected from overheating and short circuits, and the built-in safety system automatically shuts down the motor when the battery is critically discharged, saving it life.
td>80 volts
| Parameter | Model G40TM55 | Model G60TM55 | Model G80TM70 |
|---|---|---|---|
| Tension. | 40 volts. | 60 volts. | |
| Traction (max) | 55 pounds | 55 pounds | 70 pounds |
| The length of lower unit | 91 cm | 91 cm | 91 cm |
| Motor weight | 11.5 kg | 12.0 kg | 13.5 kg |
Rotors mounted on motors that have blade geometry, which reduces water resistance and increases efficiency of the entire system, and if the screw is damaged, it takes minutes to replace it and does not require a visit to the service center.
Features of battery platforms
The heart of the system is Li-Ion batteryGreenworks technology avoids memory, so you can put the battery on charge at any time without waiting for full discharge, which greatly extends the life of the battery.
The charge indicator on the battery housing shows the remaining energy in real time, which allows you to plan the route and return time with high accuracy, and the charger is equipped with a system to protect against overheating and surges in the network.
How to extend the life of the battery?
Store batteries at temperatures between +10 and +25 degrees Celsius. Do not leave them completely discharged for long-term storage (more than a month), the optimal charge level for storage is 60-80%. Avoid direct sunlight on the battery case.
Battery compatibility is a huge plus of the ecosystem, and if you already have Greenworks, you can use the batteries you have for the outboard motor, and if you need, you can buy additional capacity to increase autonomy.
Instructions for installation and first start
Mounting the motor on a transom requires no special skills, the main thing is to follow the sequence of actions and securely fix all the elements. Before the first descent, it is recommended to conduct a test run in a container with water or on shore (shortly).
☑️ Preparation for installation
First, fasten the motor to the transom, making sure the clamps cover the side tightly and without backlashes. Then set the battery in the compartment until the characteristic click. Connect the fuse if it is installed separately, and move the switch to the operating position.
Start by turning the gas handle. Start at minimum speeds to check the propeller and no extraneous noise. Make sure that lower unit is submerged to a sufficient depth as specified in the instructions to avoid cavitation.
⚠️ Warning: Never turn the motor on in the air without dipping the screw in water for more than 10-15 seconds. This can cause overheating and damage to the sealing osteoils.
Rules of operation and maintenance
For long service boat-engine After each release, especially in salt water, the unit should be washed with fresh water, which will remove the residue of salt and dirt that can cause corrosion of metal parts.
Check the rotor regularly for algae or line windings. Foreign objects on the shaft put additional stress on the engine and can damage the osteoils. Clean carefully using gloves.
- 🧼 Wash with fresh water after use in salt water.
- 🔍 Check the power cable and connectors for damage.
- 🛡️ Use a protective cover during transportation and storage.
- 🔋 Charge the battery with the original charger only.
Lubrication of moving parts is rarely required, but periodic inspection will not hurt. Pay special attention to the place of exit of the shaft from the lower unit. If you notice leakage of lubrication or water, the engine must be given to the service to replace the oils.
Use silicone lubrication to treat rubber seals and battery terminals, which will prevent contact oxidation and keep rubber elastic during the cold season.
Comparison with competitors and final choice
There are several major players in the market, but Greenworks It benefits from a balance of value and quality, and unlike some low-end Chinese counterparts, it uses high-quality battery cell base and reliable electronics.
Compared to the heavy lead batteries used in older electric motors, Greenworks' lithium-ion solutions are 3-4 times lighter at the same capacity. This is critical for small boats where every kilogram of weight affects draught and handling.
The key advantage is the modularity of the system: you buy not just a motor, but access to a huge ecosystem of battery tools, which makes investing in the brand economically viable.When choosing between gasoline and electricity, many people find that for boats up to 4 meters long, electric motors are a smarter solution: cheaper to maintain, more environmentally friendly and more comfortable to use. And the reliability of the Greenworks brand is being confirmed by a growing army of fans around the world.
The Greenworks electric motor is the best choice for quiet fishing and cruising distances up to 15-20 km without recharging, provided that the battery is high capacity.
Frequently Asked Questions (FAQ)
How long does the motor last on a single charge?
The battery life depends on the battery capacity and mode of operation. At minimum revs (trolling) the battery charge 40V 4Ah will last for 40-50 minutes, and the battery 60V 5Ah - up to 90 minutes. At maximum revs, the time is reduced by 3-4 times.
Can I use the motor in salt water?
Yes, Greenworks motors are corrosion-resistant and designed for use in salt water, but after each use, they must be thoroughly washed with fresh water to remove salt deposits.
Do I need a special permit to install an electric motor?
In most countries, including Russia, for boats with an electric motor up to 10 hp (equivalent to about 1500-2000 W) and a vessel length up to 20 meters registration in GIMS is not required if the total capacity does not exceed the limits for small-sized vessels without a license.
How to store the battery in winter?
The battery should be removed from the engine, cleaned of dirt and stored in a dry room at room temperature. the charge should be about 60-70%. Every 2-3 months it is recommended to check the level of charge and recharge the battery if necessary.