The chehona, or saber, as it is often called, is one of the most desirable, but also capricious, prey for fishermen, and this schooling fish of the carp family lives in deep swaths of fast-flowing rivers, making it difficult and not always productive to fish from shore. boat-fishing It is considered the most effective way to extract trophies, allowing you to get close to the “boilers” remote from the shore and the jets where the fish feeds.
Finding a promising location is half the success, and Chehon prefers to stay in the top water, but needs depth under the keel. inflatable boat light aluminum-boat They're perfect for this kind of fishing, because they allow you to go silently to the fishing point, and it's important to understand that the saber is a fish that is shy, and any noise or shadow from the side can cause the pack to go deep or to the side.
In this article, we will discuss in detail all the nuances of catching this fast fish. We will discuss the choice of tackle, search tactics using sonar and visual landmarks, as well as the features of fishing on rubber band and in wiring. The key factor of success is finding the border of the fast and quiet current, where the Czech is most often ambushed.
Search for a Czech parking spot from a boat
The search for fish is a dynamic process that requires constant movement. The Chekhon does not stand still, it migrates along with the feeding base of fallen insects and small fish. To search effectively, you need to visualize the surface of the water. Look for places where the river boils, which are signs of the release of the fry or the Chekhoni.
In the case of sonar Pay attention to the top layers of the water column. Chekhon often forms dense clouds that appear on the screen as gray or red spots that do not sink to the bottom. It is important not to confuse them with roach or glue, although the fishing tactics are similar to them. If the sonar shows the "walls" of fish at the bottom, it is likely a bream or a gusteur, and the saber is held higher.
⚠️ Attention: When you are actively searching on the motor, try not to pass directly over the intended parking lot of the fish. The rotor noise and the vibration of the body can scare the flock for a long time. Swim to the fishing point from the leeward side and silence the engine in advance.
And the gulls are a great guide, and if you see birds that are swirling over the water, they're diving periodically, there's 100 percent choke, and you can go to that place at a distance and try to catch it, and you can also catch the areas below the junctions, where the jet hits the quiet water, creating a backflow, and that's where the saber is most often at the boundary of these flows.
Equipment and choice of gear for boat fishing
The gear for catching the cahoni must be delicate but reliable. Since fishing often occurs on and off a boat that can sail, the rod must have a quick formation and test that allows you to throw the tooling over long distances. The optimal length of a spinning or feeder is from 2.7 to 3.3 meters. Shorter fishing rods are difficult to control wiring and catching.
The basis of the tooling is often a donka rubber or feeder gear with a long leash. Leska The wicker is used monophilic, 0.20-0.25 mm in diameter, as the wicker can get confused when strong wind and pitching. The hooks must be sharp, with a long forearm, size 10-No14 according to the international classification, to reliably fix the movable bait.
- 🎣 The rod: Feeder or spinning, test up to 60-80 grams, fast build.
- 🎣 Coil: Non-inertial, size 3000-4000, with good line laying.
- 🎣 Hooks: Sharp, with a long forearm, for the nozzle of a worm or a worm.
Special attention should be paid to the feeder or cargo. When fishing from a boat on the current, rocket feeders are often used, which quickly give off food, or heavy loaders-olives, if fishing is carried out on bait or fry. Spring feeder It is also effective if you want to create a local cloud.
Tactics of catching rubber from the side
Boat rubber fishing is very different from shore fishing, where the angler is not tied to shore, which gives you a tactical advantage, you can anchor upstream from the fish and lower the gear exactly to the right point, and the main thing is to calculate the length of the working descent so that the hooks are in the right horizon.
The installation uses a 1:5-stretching rubber band, which means that a 10-meter hook line needs about 2 meters of rubber bands. When fishing from a boat, it is important to have a stock of rubber bands on board, so that you can tighten the gear or, conversely, let go deeper. The anchor cord must be strong so that the current does not blow the boat off the fishing point.
☑️ Preparation of the rig for the rubber band
The technique of fishing is to twitch the main line rhythmically. Chekhon reacts to movement, and the game of bait often provokes an attack even by passive fish. If there is no stick, try to change the horizon of the fishing by letting go or tightening the gear. Often the pack is in half waters, and the bottom equipment it ignores.
⚠️ WARNING: When using a rubber band, make sure it doesn't overlap around an anchor cord or boat. Sharp tension can cause your hands to cut or even damage to the side. PVC boatsAlways use protective gloves when working with a rubber shock absorbing insert.
Fishing in the wiring on the current
Wiring is an active and athletic method that allows you to catch large areas. From a boat anchored across the current or along the stream, the angler releases the tool downstream, allowing the bait to swim in the natural flow. Chekhon attacks the floating prey, so the static nozzle at the bottom of it is less interested.
The wiring uses a sliding loader or a light float-birulino (bombard) if the fishing is carried out on surface baits. The weight of the cargo is selected so that the current does not press the fishing line to the bottom, but does not carry the tooling to the surface too quickly. The optimal speed of wiring is a little faster than the flow of water.
As a bait for wiring, the following work best:
- 🪱 Scoundrel: A beam of 3-5 pieces on the hook creates volume and movement.
- 🪱 Dung worm: It must be alive and actively writhing in the stream.
- 🪱 Artificial flies: Imitating fallen insects often work better than natural bait.
It's important to keep the line tight. Chehon takes the bait abruptly, and with a sagging line, you just can't feel the bite. The slash should be short and whip. multicoilThe friction should be tuned very precisely, since a sharp jerk of a large saber can lead to a break in a thin line.
Seasonal Features and Choice of Bait
The taste of the Czechoni varies with the seasons. In spring, after spawning, the fish are exhausted and rushed to any high-calorie food. During this period, worms, moths and large larvae work perfectly. In summer, when there is plenty of natural food in the water, the saber becomes more legible.
The table below will help you navigate the selection of bait by season:
| Season. | Preferred bait | catching horizon | Activity |
|---|---|---|---|
| Spring (May-June) | Worm, moth, caddy | Bottom, water. | Tall, post-sleeping jore |
| Summer (July-August) | The squirrel, the flies, the fry. | Upper, surface. | Morning and evening snooping |
| Autumn (September-October) | Malk, cutting, squirrel. | Deep layers, pits | Medium, depth displacement |
In autumn, when the water cools, the Czech Republic rolls into deep pits and wintering pools, and fishing from a boat during this period requires accurate knowledge of the bottom relief. Bait. It's got to be more visible and fragrant, and often fishermen use sandwiches, like a worm with a worm or a foam ball with a horn to make it buoyant.
The secret ingredient
Adding a small amount of fish oil or hemp-scented attractant to the bait can significantly increase the number of bites during periods of mild pecking.
Catching techniques and catch conservation
Chehon is a strong and squishy fish. Once hooked, it makes sharp jerks, often jumping out of the water ("candle"). When fishing from a boat, it is important not to let the line sag, but also not to force the catch, so as not to break the weak lips of the fish. A large saber is better to take in a sucker, as it can turn out of hands at the last moment.
Special attention should be paid to the storage of the catch. Chekhon falls asleep and spoils very quickly. If you plan to let go of some of the fish or keep it fresh, use a spacious kukan or a cage dipped deep in the water. In a cramped cage, the cacheon quickly dies from lack of oxygen.
To keep the cage alive longer, change the water in it or move the cage to a faster current. Dead cache quickly loses its appearance and taste.
To transport the fish home, it is better to pour ice or use special refrigerants. The meat in the Czechoni is tender, oily and very tasty, especially when dried or smoked. However, to get a quality product, you need to properly prepare the fish immediately after fishing, removing the gills and insides.
The key to catching a cahoni from a boat is to constantly search for an active pack and present the bait correctly in the right water horizon.
Frequently Asked Questions (FAQ)
What time of day is best to catch a boat?
The best tittle of the chehoni is seen in the morning and evening gaze, and during the day the fish often go deep or stop pecking, especially in hot weather, and at night fishing is possible, but less predictable.
What is the best size for fishing for a boat?
Light and maneuverable boats with a length of 3.2-3.6 meters are optimal. metal boat It is more difficult to maneuver when searching for fish, and on small ones it is unstable to work with long rods.
Can I catch a chez on spinning?
Yes, it's a great spinning technique for small, fluctuating sprinkles, wobbler-creams, and even edible rubber, which is called bombard-fishing, or just spinning in the top layers.
Do I need to feed the Czech when fishing from a boat?
You can feed, but it's hard because of the current, and you'd better use feeders that create a feeding plume, or throw bait balls upstream from the boat to be carried off to hooks.