Egg fishing from a boat is not just a way to get a large bream, but a real art that requires a fisherman to understand hydrodynamics, fish behavior and precise engineering in making tackle, a technique that originated in the lower Volga, has long outgrown regional boundaries and become a benchmark for passive but incredibly effective fishing on the current. Egg laying allows you to catch deep holes and bed brows, where there is a large fish, without scaring it with the noise of the motor or splashing oars.
The key to efficiency lies in the unique design, where the feeder and the main cord with hooks are located at different distances from the boat, forming the perfect angle of attack for the bottom fish. To assemble the working version, you do not need expensive store kits, enough basic knowledge and the right materials. In this article, we will discuss in detail how to make the egg tackle yourself to make it work better than factory counterparts.
Principle of operation and advantages of design
The main idea of the tackle is to use the force of the current to tension the line and keep hooks with the bait in a strictly defined horizon. gruzilloAn egg-shaped or olive-shaped rod lies on the bottom, while the main line that passes through its hole or sliding ring is pulled by the current, holding the leashes in the working position, which allows you to fish even in a very strong current, where ordinary donkeys knock to the side.
The design of the "eggs" provides self-shopping of the fish: when pecking, bream or other white fish pulls a line, and friction against a loader or locking knot often leads to a reliable hook in the lip. Ring-ring And eggs are close relatives, but eggs allow you to use longer leashes and fish more easily, because the cord is not tied tightly to the feeder, but slides.
The use of the boat here is critically important, since it is from the board that you can accurately set the angle of tension of the line. Anchor cord The fisherman can quickly change the horizon of the fish, simply by letting go or washing the main line, which is especially important when changing the activity of the fish during the day.
- 🎣 High sensitivity of the tackle allows you to register even the most careful bites of the bream.
- ⚓ The ability to catch on a strong current without demolishing hooks away from the stern path.
- 🐟 Minimum risk of entanglement of leashes due to their rigid fixation with respect to the main axis.
- 🛶 Compact equipment: All items can be easily placed in a small fishing box.
⚠️ Attention! When fishing from a boat, always use a reliable anchor or two anchors (nose feed) to ensure that the boat does not turn across the current, which can lead to entanglement of the tackle or even tipping over.
Required materials and tools for assembly
To make a quality tackle that will last several seasons, you need to carefully approach the choice of materials. monophile Or a wicker cord that is resistant to abrasion against a shell and rocks at the bottom. The main line is most often used in diameters from 0.35 to 0.5 mm, because thin cords can cut hands when catching trophies.
The key element is the egg itself, the loader, and you can buy it ready-made, but often fishermen cast it themselves from lead to get the ideal weight for a particular current. carbine, vertebrae and quality fittings that will not fail under load. hook Good steel is a guarantee of the implemented bite.
Fluorocarbon is ideal for leash making, invisible in water and highly abrasion-resistant, with leash lengths ranging from 30 to 100 cm, but the classics for eggs are 50-70 cm long.
| Component | Recommended parameters | Appointment |
|---|---|---|
| Main line | 0.35 - 0.50 mm | Link, loads. |
| Leads. | Fluorocarbon 0.22 - 0.30 mm | Hook installation, stealth. |
| Gruzilo (Egg) | Lead, 60-150g | Keeping tackle at the bottom |
| Hooks. | № 8-12 international classification | Fixing the bait |
Step by step instructions: how to make a tackle yourself
The manufacturing process begins with the preparation of the main line. Wrap off the coil of about 15-20 meters of a line with a diameter of 0.4 mm. At one end, fasten a reliable vertebral with a carbine - this will be the place of attachment to the side of the boat or to a special nod. At a distance of 1-1.5 meters from the carbine, you need to install a locking assembly or bead, which will limit the course of the loader.
Then we form the working part. We pass the main line through the hole in the loader (or through a special eye if a modified egg is used), and below the loader, at a distance of 3-5 meters (depending on the depth and strength of the current), a loop is made or a triple vertebra is installed to attach the leashes. Leads. They are fixed so that they do not overlap when casting, but float freely in the flow of water.
The final step is to install hooks. Tie a 2-3 50-70 cm leash to the bottom node. Use the Palomar or Clinch node for maximum strength. At the end of the main line, you can tie a small loader-strapped or leave a loop for a quick change of the working segment.
☑️ Checklist for tackle assembly
It is important to check the smoothness of the line through the loader, if the hole in the lead is rough, it can be carefully drilled and insert a plastic or brass tube so that the line does not rub during operation.
Selection and manufacture of the correct shape
The shape of the shipper is crucial. The classic egg should be elongated, with a smooth surface so that the current does not create turbulent swirls that could alert the fish. The fishing hole should be strictly in the center or with a shift that ensures the horizontal position of the loader at the bottom.
Many anglers prefer to make the bog themselves, and this is done by making a plaster mold that pours molten lead into the mould, and then by inserting a steel wire or a tube in advance to form a channel under the fishing line. The optimal weight of the loader for the medium current (1-1.5 m / s) is 80-100 grams. If the current is weaker, the weight is reduced to 60 g, if stronger - increase to 150 g.
The secret of the shape of the loader
The load in the form of a flattened egg lies better on the stained bottom and less burrows into the ground than the spherical one, which is critical for maintaining the sensitivity of the tackle.
Modern manufacturers offer tungsten loaders that are much smaller than lead loaders at the same weight, making them more convenient to store, but they are more expensive and tougher to hit the fishing line.
Proper equipment and choice of hooks
Egg fitting requires a balance between strength and stealth. As mentioned, fluorocarbon is best used for leashes. Its stiffness prevents crossovers, and its transparency makes the leash invisible to careful bream. The leash thickness should be 0.05-0.1 mm smaller than the diameter of the main line, so that when the leash is dead, it is the leash that breaks off, not the main gear.
The choice of hook depends on the type of bait. For the worm and the worm, long forearm hooks (for example, models) will be suitable. Owner or Gamakatsu For plant nozzles (corn, barley), it is better to use round-curve hooks and short forearms. The size of the hook usually varies from No. 8 to No. 12 according to the international classification (in Russian - from No. 4 to No. 7).
- 🪱 For a bunch of worms, choose hooks No. 6-8 with a long forearm.
- 🌽 For corn and peas, hooks No. 10-12 with a short forearm are ideal.
- 🦐 The universal version is hooks No. 8-10 with an average length of the forearm.
For fishing at a depth of more than 3 meters, color does not matter, but in shallow water or in clear water, it is better to use dark, incense hooks that are less noticeable against the background of the bottom.
Tactics of fishing and search for promising places
Boat fishing is an active search, despite the passivity of the gear itself. The promising places are the channel brows, the entrances and exits of the pits, and the areas with a reverse current. Breath likes to stand on the border of fast and slow flow, where the current brings food, but does not knock off the feet.
The fishing technique is simple: the boat anchors across the current or at an angle. The feeder with bait (usually a rocket net) goes upstream on the anchor cord. The hook rig drops down next to the feeder, but downstream. The line is pulled up, and the tackle is fixed on the side nod or in the hand.
⚠️ Attention! Never wind a fishing line on your finger when fishing from a boat in a strong current. A large bream or accidental hook can cause serious hand injuries or even the loss of a finger.
Use the sonar to look for depth differences. The bream often stands on a dump in the depths, and the exact positioning of the boat above the brow will increase the number of bites at times.
When you bite, the nods are bent or straightened abruptly, and the nod should be confident, but not sweeping, because the distance to the fish can be considerable, and you need to catch them quickly, so that the fish can not go away towards the anchor cord, otherwise you can not avoid entanglement.
The key to success is to constantly monitor the tension of the fishing line and react quickly to the change in the nature of the cool, so if you don't bite for more than 20 minutes, change the location or horizon of the fishing.
Frequently Asked Questions (FAQ)
What weight is the loader needed to flow 1.5 m / s at a depth of 5 meters?
For such conditions, the optimal loader weighing 100-120 grams. The shape should be streamlined (egg or olive) so that the loader does not drag along the bottom, but also does not lie dead weight, allowing the tackle to play on the current.
Can I use a wicker cord instead of a fishing line?
Use the wicker (thread-cord) It is possible, but not recommended for beginners: the tiles do not stretch, which improves sensitivity, but they are very scalable and can cut their fingers when they are caught, and they are more visible in the water, which can scare off careful fish.
How many leashes is better to put on the tackle?
Classic gearing involves 2-3 leashes. A larger number (4-5) increases the likelihood of entanglement of the tackle when catching and lifting, especially if fishing occurs in windy weather or in strong currents.
Should I use a feeder with this gear?
Use of the feeder (rocket) It is highly desirable. It is a bream that is odorous and bleak. Without a bait hook, the bait hooks will work less efficiently because the fish will not concentrate at the point of catch.