Choosing a fishing boat is always about finding a trade-off between comfort, load capacity and mobility. flounderboat (NDM) have become the gold standard for most active fishing fishermen, and unlike the pile-up designs, they assemble faster, weigh less, and have excellent cruising ability thanks to their keel-shaped bottom.
But the market is full of offers, and it's hard to figure out which model is going to be perfect. Some people are looking for a single doll for alloy fishing, others are looking for a two-seater tank for going to the big water with a sonar and an anchor. In this article, we'll take a look at the technical details so you can choose from them. best-boat It's for your own purposes.
First of all, it is important to understand that there is no universal solution. Optimal size It depends on whether you're going to fish alone or with a partner, and on the power of the engine you're going to use, and the wrong choice can lead to either a little bit of drag or a dangerous overload on the water.
Advantages of the design of NDND over the soldering analogues
The main difference between the NDB is the inflatable cylinder, which acts as a keel, and the inflatable floor, divided into compartments, which allows you to achieve high rigidity of the case without the use of heavy plywood or aluminum floorboards. Strength of construction Here it is achieved due to the high pressure in the cylinders, which provides excellent germination on the wave.
Fishers appreciate these boats for their speed of assembly, so you don't have to waste time laying stringers and inserting bulkheads, like you do with the case of the boat. flatboatJust pump the cylinders and the boat is ready to launch, which is especially important in windy weather or when you move between water bodies.
Another important aspect is safety, because the design of the NDB involves several independent compartments, and even if one of them is damaged, the boat will remain afloat. keel-shaped The bottom provides a stable course and reduces the risk of tipping over with sharp movements of the fisherman during catching the trophy.
- 🚀 Assembly speed: preparation for the release takes 10-15 minutes against 30-40 for mutual models.
- ⚖️ Weight: the average two-seater NDND weighs 10-15 kg less than the same sized solder boat.
- 🌊 Driving qualities: the keeled bottom cuts the wave better, providing a soft ride.
In the event of serious damage, the cylinder can be replaced or sealed in the field, which is more difficult to do with deformed aluminum profile or crumbled plywood.
Selection criteria: size, PVC density and load capacity
When choosing fishing-boat The length of the hull affects not only the number of passengers, but also the length of the useful working area. For single fishing with a minimum set of gear, a length of 280-320 cm is often enough. However, if you plan to use a sonar, anchor and spare batteries, it is better to consider models from 340 cm.
Material density is the second critical parameter, and there are fabrics on the market that are between 750 and 1,100 g/m2. Many newcomers mistakenly assume that the thicker the PVC, the better. reinforced polyvinyl chloride The density of 850-900 g/m2 is the optimal balance between strength and weight. denser fabrics (1100 g/m2) make sense only for boats longer than 4 meters or for operation in extreme conditions of rocky rapids.
⚠️ Warning: Buying a boat made of thin PVC (less than 850 g/m2) to install a powerful engine, you risk a “splash” effect. The bottom will be bent under the weight of the engine and fisherman, which will lead to a splash overflow and loss of speed.
The formula is simple: crew weight + engine weight + equipment weight + 20% of the margin. If the rated carrying capacity is equal to the sum of the weights, the boat will sit too low in the water, losing its driving qualities. Working height of the side The water should be at least 20-25 cm above the water for safe fishing.
When calculating the length of the boat, take into account not only the height of the fisherman, but also the need to place fishing boxes (robots) on the sides so that they do not interfere with the work of oars or access to the engine.
Overview of popular models: producer rating
The market of inflatable boats in the CIS is represented by both eminent brands and many local manufacturers. FlagshipThey're the ones whose Pilot and Master models set the standard for quality, and their boats are very good at putting seams together and using reliable fittings.
Another popular brand. Mneve and KTheir Cayman series is known for its reliability and sophisticated ergonomics, often chosen by professional athletes and guides, and featured the use of reinforced linings on the bottom and cylinders.
The budget segment is represented by brands like Aqua or brigThey offer good solutions for beginners, but can be inferior to top models of the veh, such as the quality of the valves or the density of tissue in places of greatest stress.
| Model | Length (cm) | Density of PVC (g/m2) | Weight (kg) | Recommended motor (hp) |
|---|---|---|---|---|
| Flagship Pilot-M 340 | 340 | 900 | 48 | 9.9 |
| Mev Cayman 330 | 330 | 900 | 46 | 9.9 |
| Aqua 320 NDLD | 320 | 850 | 42 | 8-10 |
| Brig NH 330 | 330 | 900 | 45 | 9.9 |
When choosing a specific model, pay attention to the presence of timber It protects the cylinders from impacts on the pier and rocks, significantly extending the life of the product.
The secret to the longevity of seams
The quality of the NDND boat is 80 percent dependent on the technology of gluing the seams. The best method is hot two-part gluing, where the seam actually becomes part of the material, not just a lining. Cold gluing is cheaper, but requires more careful operation.
Ergonomics of fisherman: the location of cans and fasteners
For the fisherman, the boat is not just a transport, it's a workplace, so the location of the cans is key. In good NDND models, the banks are attached through the NDB. lyctrose It's a cord system, which allows you to move them along the side, so you can change the balance of the boat depending on the number of passengers and the cargo.
An important element is the availability of a platform for installation sonar Often, anglers will mount transom wheels that should fold and not interfere with rowing, and make sure that the model you choose has reinforced pads for mounting them.
It is also important to pay attention to the number and location. pulp-knobs The presence of liners along the inner perimeter of cylinders allows bags, anchor flaps or life end to be secured so that they do not fall into the water.
- 🎣 Fastenings of rods: look for models with ready-made holders or the possibility of installing them on banks.
- 🔋 Under the battery: the presence of a special sealed box or platform for batteries in the nose.
- 💡 Lighting: possibility of installing running lights without impairing the leakproofness of cylinders.
⚠️ Warning: When installing additional equipment (echo sounders, lights) never drill cylinders! Use suction cups or attach devices to removable cans and transom.
Preparation for the season: checklist of equipment
Buying a boat is just the beginning of the journey, and to make fishing comfortable and safe, you need to properly equip the boat, and not even having a small part can ruin the entire trip.
☑️ Basic equipment of the NDND boat
The pump choice requires special attention. Bulk pressure (usually 0.2-0.25 atm) is critical for BNDM. Using a car compressor without a pressure gauge can cause the seams to pump and deform in the sun or to fail to pump, making the boat "sluggish."
And don't forget the squirrel wheels, because for a heavy boat, powered by a motor, it's not a luxury, it's a necessity, and it allows one person to easily move the boat up and down the coast to the water and back without loading their backs.
Care and storage: how to extend the life of PVC
Polyvinyl chloride boats require proper care, especially after the active fishing season, the main enemies of the material are dirt, salt and ultraviolet. After every fishing trip, especially on salt water, the boat must be washed with fresh water.
Suit Even the minimum amount of moisture inside a rolled-up boat can cause mold and a bad smell that is almost impossible to remove. If you can't dry the boat at home, at least spread it on the shore before packing.
Proper storage at temperatures from +5 to +25°C in the straightened or semifolded state significantly increases the resource of PVC tissue and prevents microcracks on the folds.
Keep the boat in a straightened or semi-folded state to avoid permanent cloth cloth cloth. If the boat is kept deflated, periodically (once a season) change the fold lines.
Frequently Asked Questions (FAQ)
How long should a NDND boat be for a single fisherman with a motor?
For comfortable fishing alone with the engine, the optimal length is 300-320 cm. The smaller size will be uncomfortable due to lack of space for tackle, and the larger (340+ cm) will create difficulties in transportation and require a more powerful and heavy motor.
Can I use a NDND boat in winter?
You can use PVC boats in low temperatures, but with caution. The material in the cold swells and becomes brittle. You need to use special frost-resistant greases for the valves and avoid impacts on the ice. You can only keep the boat warm in winter.
Which is better: a NDND or a fishing boat?
For fishing, NDND is more likely to benefit from assembly speed and less weight: The solder boat is tougher and more stable, it is better suited for trolling or standing fishing, but loses in mobility and weight.
What pressure should be pumped into the NDNDT cylinders?
The operating pressure is usually 0.2 to 0.25 atmospheres (200-250 mbar), the exact data are always indicated in the product passport, pumping is dangerous by rupture of seams in the sun, failure to pump - loss of driving performance.
Do I need to register a boat in GIMS?
Registration is mandatory if the weight of the outfit vessel (boat + engine + equipment) exceeds 200 kg, or if the engine power is more than 8 kW (about 10.8 hp). For light engines up to 5 hp and small boats registration is often not required, but the rules may change, so it is worth clarifying the current standards.