Choosing a power plant for a small vessel always involves finding a balance between cost, reliability and performance. Hidea 60The engine has proven to be an affordable alternative to expensive Japanese and American brands, and has attracted the attention of boat owners and professional anglers through a combination of a powerful two-cylinder unit and a democratic pricing policy.
Many potential buyers mistakenly believe that low prices are a direct indicator of low quality, but in the case of a Chinese brand, the company is a very good buyer. Hidea The manufacturer has been supplying engines to the global market for more than two decades, using licenses for Yamaha’s time-tested designs. The 60 horsepower model is considered one of the most sought-after in the brand’s lineup, as it falls into the middle of power for most water-based tasks.
In this review, we will discuss in detail the technical nuances, service features and real performance specifications of this unit. two-stroke We will also discuss compatibility with different types of vessels and possible modifications.
Technical specifications and engine design
The basis of the design Hidea HD60FWS It's a time-tested two-cylinder circuit, and it's 60 horsepower at 5,500 rpm, which gives you great low-speed traction and a steady plane, even when you're fully loaded, with a cylinder capacity of 946 cubic centimeters, and a cylinder diameter of 86 millimeters at 82 millimeters.
One of the key features is the ignition system. CDI Capacitor Discharge Ignition, which provides a stable spark throughout the entire rev range, is critical to prevent ignition misses when the throttle is opened abruptly, and is a forced, water-based, thermostat cooling system that allows the engine to quickly reach operating temperature and not overheat during prolonged high revs.
The transmission is one forward, neutral, one back, switching with a thrust of a ramper or remote control, and the gear ratio is 2.08:1, which is the standard indicator for this power class. lower unit The engine is extended series (L), which makes it suitable for installation on high-transcent vessels.
Secret power
Why 60 hp?: Many people mistakenly believe that 60 forces is not enough. However, for boats with a length of 4.5 to 6 meters with two passengers and equipment, this power is optimal for entering the plane. The engine does not overload, operating in a comfortable range of 4500-5000 rpm, which prolongs its life.
The weight of the motor in running order is about 105 kilograms, an average that allows installation and dismantling by two people or using a special wheelbarrow, the crankcase is made of aluminum alloy, resistant to corrosion, but requires regular washing with fresh water after use in salt water.
Power supply and fuel consumption
Engine. Hidea 60 It has a carburetor mixing system with two float chambers, which is considered a classic and highly maintainable in the field, and unlike complex injection systems, the carburetor is easier to set up and easier to maintain, which is especially true in remote regions where there are no specialized service centers.
The actual fuel consumption depends on the driving style and loading of the vessel: in cruising mode, which is approximately 70-75% of the maximum power, the engine consumes about 18-20 liters of gasoline per hour.
The fuel mixture must be made using high-octane AI-92 or AI-95 gasoline and high-quality two-stroke oil, the mixing ratio is 1:50 for new engines (break-in period) and can be adjusted to 1:40 for low-quality or high-load oils. synthetic oils It significantly reduces the amount of sodium on candles and pistons.
Use a transparent fuel supply hose with a built-in sediment filter to visually monitor the presence of water or dirt in the gasoline before it enters the carburetors.
Owners should pay special attention to the purity of the fuel; small particles of rust from old canisters or tanks can instantly disable the jellybar of the carburetor; Regular replacement of fuel filters is not just a recommendation, but a necessity for the long life of the engine.
Testing process and first incorporation
The new engine is the foundation of its longevity, and it takes about 10 hours to grind the rubbing parts, and ignoring this stage can lead to piston group bullies and loss of compression in the future, and during the first 10 hours of operation, you must strictly observe the temperature regime and not exceed certain speed limits.
The first 2 hours of operation, the engine must be idling or at minimum load, this is necessary for the initial burnout of the piston rings to the cylinder walls. The next 4 hours are allowed to increase the speed to 3,000 per minute, but long-term operation at full gas is strictly prohibited.
☑️ Hidea 60 break-in plan
Temperature control is an important aspect: if you notice that the engine is running "traction" or the body temperature has become abnormally high, the load should be immediately relieved. After completing 10 hours of motorized exercise, it is recommended to carry out full maintenance: replace the oil in the gearbox, check the tightening of the bolts and clean the spark plugs from the soak.
⚠️ Warning: Never keep the humming device at its extreme (full gas) for more than 2 minutes in a row during break-in. The engine takes time to cool and circulate the grease under variable loads.
Comparison with competitors and reliability
In the outboard motor market Hidea 60 The main advantage of the Chinese brand is the price, which can be 30-40% lower than that of Japanese counterparts, while structurally the engines are almost identical, as Hidea uses proven engineering solutions.
The engine is reliable, and it's good for maintenance, and the cylinder block is made of silimin, and the crankshaft has a lot of safety, but compared to the top brands, there's a slightly higher vibration level at idle speeds, which is a feature of balancing budget two-cylinder engines.
Below is a comparison table of the specifications of the Hidea 60 and its main competitors:
| Characterization | Hidea HD60FWS | Tohatsu M60D2 | Yamaha 60CMH |
|---|---|---|---|
| Power (hp) | 60 | 60 | 60 |
| Workload (cm3) | 946 | 946 | 946 |
| Weight (kg) | 105 | 106 | 108 |
| Launching system | Electrical starter | Electrical starter | Electrical starter |
| Guarantee (month) | 24 | 24 | 24 |
It's worth noting the availability of spare parts. Because the design is unified with popular Yamaha models, finding a piston group, carburetor or exhaust system elements is not difficult. Hidea 60 An attractive choice for those who appreciate repairability.
Maintenance and troubleshooting
Regular maintenance is a guarantee that the engine will last the manufacturer's stated period, and every 50 hours or at the end of the season, a comprehensive check is required, which includes changing the oil in the gearbox, checking the condition of the anodes (zinc treads) and lubricating the swing points.
One of the common problems faced by owners is difficulty starting or unstable operation at idle speeds, most often the cause lies in contamination of the carburetor or spark plugs, and you should also check the condition of the fuel pump, which may stop supplying gasoline when the mesh filter clogs.
To diagnose the condition of the cylinders, experienced mechanics recommend periodically measuring compression. Hidea 60 The spread of readings between cylinders of more than 1 atmosphere indicates the need for defective piston group.
Timely replacement of gaskets and gaskets (every 2-3 seasons) will prevent water from entering the crankcase and expensive engine repairs.
⚠️ Warning: When changing the oil in the redctor, always change the sealing rings on the drain plugs. Old rings lose elasticity and can let water through, leading to oil emulsification (mayonnaise) and the destruction of gears.
If the motor starts losing power under load, first check the lower unit for algae or dents. Also check the thermostat of the cooling system: jammed in the closed position valve will cause rapid overheating and emergency stop.
Tuning and possible modernization
Although Hidea 60 It is a reliable stock unit, some owners are looking to improve its performance. The most common and safe type of tuning is the installation of a more productive screw. Replacing a standard aluminum screw with stainless steel with a modified pitch can increase the speed of the boat by 2-4 km / h.
Also popular is the addition of an extra, external, thin-cleaning fuel filter with a water separator, which does not increase power, but significantly prolongs the life of carburetors. Some craftsmen practice installing more "cold" spark plugs when operating the engine in hot climates or when working at high speeds.
It is not recommended to interfere with the ignition system or change the settings of the carburetor without deep knowledge. Attempts to artificially increase the fuel supply or change the angle of ignition advance can lead to the burning of pistons. carburetors It is already optimal for most operating conditions.
The effect of the screw on speed
A 1-inch increase in pitch adds about 200-250 rpm to maximum revs and increases speed, but reduces thrust. Reducing the pitch of the screw, on the contrary, increases thrust and allows you to get the boat to the plane faster, but reduces the maximum speed.
Before making changes to the design, it is worth weighing all the pros and cons. Often, the standard capabilities of the engine are enough for comfortable operation.
Frequently Asked Questions (FAQ)
Which petrol is best used for Hidea 60:92 or 95?
The manufacturer allows the use of gasoline with an octane number of at least 90 (by the research method), which corresponds to our AI-92. However, the use of AI-95 is preferable, since it provides a smoother combustion of the mixture and reduces the risk of detonation, especially in hot weather or under high loads.
How often should I change the oil in the redactor?
The first oil change in the redctor must be made after the first 10 motor hours (after running), then the procedure is repeated every 50 hours or once a year, regardless of the mileage, the color of the oil should be transparent; if it has acquired a milky shade, then the leakiness of the oils is broken.
Can I use the motor in salt water?
Yeah, Hidea 60 It has a corrosion-resistant coating and can be used in salt water, but after each outing, it is critical to wash the cooling system and the outer surfaces with fresh water, and regularly check the condition of zinc anodes and change them when corrosion is more than 50%.
What is the maximum length of the boat for this engine?
The 60 hp engine is optimally suited for boats with a length of 4.5 to 6.5 meters. On boats shorter than 4 meters, the engine can be redundant and dangerous, and on boats longer than 7 meters, the thrust of 60 forces may not be enough for confident planing with full load.
Where is this motor made?
The Hidea-branded engines are manufactured in China by Hidea Marine Machinery Co., Ltd. The plants are located in Hangzhou, China, and despite their Chinese origin, the production is certified to international standards and quality control meets the requirements for export to Europe and the United States.