In a world of affordable water transport motorboat Intex It has long proven itself as a reliable and budget option for fishing and recreation on the water. Intex Recreation Corp Often associated with simple inflatable toys, their line of motorized vessels deserves serious attention, they are full-fledged boats that can withstand significant loads and feel confident even with a little excitement.
The main advantage of these structures is their versatility and ease of transportation, the deflated vessel can easily fit into the trunk of a passenger car, and its assembly takes a few minutes even for a beginner. flyboat It's really motorized, you have to pick up the right attachments and follow the rules of operation, which we'll talk about in detail later, and ignoring the technical requirements can cause transom or cylinders to break.
It's worth noting that modern models are equipped with reinforced bottom and strong cylinders of multi-layer polyvinyl chloride, which allows you to install gasoline or electric engines of a certain power on the transom. fishing-boatBecause it's what makes you safe on the water, and the right choice of components makes a simple inflatable structure a complete vehicle.
Design features and materials
The basis of any PVC The material from which its cylinders are made. Intex It uses high-strength polyester-reinforced vinyl, which is a structure that provides resistance to puncture, abrasion and ultraviolet rays. Unlike cheap vinyl, it uses technology. Super-ToughThis involves a three-layer structure of the material, which is critical for the durability of the product during active operation.
Particular attention should be paid to the bottom, depending on the model, it can be inflatable or made of a rigid aluminum profile. inflatable floor (Air Floor technology) provides maximum comfort and buoyancy, but limits speed, hard bottoms allow higher speeds and provide a sustainable platform for parking while fishing, and the type of bottom you choose directly affects the performance of your boat.
⚠️ Warning: Never leave a fully pumped boat in direct sunlight for long periods of time unattended. The air inside the cylinders expands when heated, which can cause seams to rupture or deform the material.
Tranx is the element that takes the bulk of the load from the motor. Intex It is usually made of moisture-resistant plywood or composite materials and is covered with a special film. The hinged transom The engine must be installed strictly according to the instructions to avoid engine distortion, and improper installation can cause the engine to go underwater along with part of the vessel, which is a dangerous situation.
To extend the life of the transom, lubricate the engine attachment points with silicone lubrication to prevent metal friction against plywood and the formation of bullies.
Popular series and their specifications
Product line Intex It has many modifications, but not all are suitable for installing the engine. Excursion and SeahawkThese models are specifically designed to accommodate outboard motors and have reinforced cylinder designs, and they are not only visually but also technically capable.
Series Excursion It's positioned as a more professional, it uses reinforced material from the bottom and cylinders, and it also has the ability to install. sonar Often equipped with comfortable seats with backrests and fishing rod holders, this is an ideal choice for those who plan to spend several hours on the water and need additional comfort.
Model series Seahawk They're a more budget-friendly segment, they're lighter and smaller, but they also allow for low-power engines, and the main difference is the design of the bottom and the number of inflatable compartments. loading capacity For you, this is not a critical parameter and you plan short exits to calm water, then this option will be a great solution to start with.
To compare the basic parameters of different models, it is convenient to use a table, which will help you quickly navigate the specifications and choose the best option for your tasks. Pay attention to the maximum power of the recommended engine, as exceeding it can be dangerous.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Max engine power (hp) |
|---|---|---|---|---|
| Intex Excursion-2 | 236 | 130 | 250 | 3-4 |
| Intex Excursion-3 | 315 | 147 | 400 | 4-5 |
| Intex Excursion-4 | 351 | 163 | 570 | 5-6 |
| Intex Seahawk-2 | 236 | 114 | 240 | 2-3 |
Choosing an inflatable outboard motor
The selection of the engine is the key point on which the safety and pleasure of cruising depends. Electric motors They are ideal for quiet fishing, where you can't scare the fish away with noise. They are lightweight, do not require registration with a GIMS (in most cases) and easy to maintain. However, their range is limited by battery capacity, and speeds rarely exceed 5-7 km / h.
Gasoline two-stroke They provide more power and autonomy. Intex It is transformed into a high-speed vessel capable of covering long distances and going to planing (with the appropriate design of the bottom). Excursion Motors with a power of 2 to 5 horsepower are the best choice, and more powerful units can create excess traction, which is dangerous for the design of the transom.
Why are two-stroke engines more popular for small boats?
Two-stroke engines are lighter than four-stroke engines of the same power as those critical for inflatable boats with limited payload capacity, and are easier to transport because they are not afraid of tilting and flipping, and cheaper to maintain.
When installing the motor, it is important to set up correctly angleIf the boat's nose is too upside down, the boat will lose its stability and may flip over when it turns, but if the nose is too submerged, resistance will increase, and the boat will dig with its nose, grabbing water. Experimentally find a position where the boat is going straight without burrowing in the wave.
Accommodation and necessary accessories
Standard equipment for boats Intex It's usually a paddle, a hand pump, and a refit, but it's not enough to be fully and comfortably operated, and experienced water-engines immediately buy extra accessories that make life on the water much easier, and without them, using a vessel can be a test of strength.
First of all, you should think about buying a quality anchor, and the standard stone bags that come with the kit often prove useless even in the middle current or in the wind. cat anchor Weighing 1.5-2 kg will ensure a safe parking, and an indispensable element is the safety falcon, which is attached to the ring on the bow of the boat.
To protect the bottom from sharp objects and abrasion, it is recommended to use a special protective mat or door-wheelThe latter are especially important if you often have to launch the boat alone, and the wheels make it easy to move the boat along the shore without dragging it, which preserves the material of the bottom.
- 🎣 Engagement holders A must-have for fishing, allowing you to free your hands.
- 🔦 germ-o-o-o-o- - to store the phone, documents and keys in dryness.
- ⚓ Anchor falla - Bright rope with a buoy so as not to lose anchor at depth.
- 🔧 Toolkit The minimum you need to carry for field repairs.
☑️ Boat assembly
Operational rules and safety measures
An inflatable boat requires more care than a rigid hull, and before each descent, you need to visually inspect the surface for damage, and even a small pebble or a sharp knot can cause trouble. Pressure in cylinders It must strictly comply with the manufacturer's recommendations specified in the instructions.
⚠️ Warning: Do not exceed the maximum load capacity specified in the product passport, which includes the weight of all passengers, motor, battery, equipment and fuel, and overload reduces the buoyancy and stability of the vessel.
When you're operating in the cold season or when you're running in the cold, or when you're running in the cold, the pressure in the cylinders will change, and in the cold, it'll fall, and you'll have to pump the boat, and in the heat, the pressure will increase, and you may need to blow out the excess air to avoid breaking. floater.
Remember personal protective equipment: a life jacket should be worn on everyone on board, regardless of their ability to swim. Water situations are rapidly evolving, and having a vest can save lives if they tip over or fall overboard. Neglecting this rule is a gross violation.
Regular pressure checks and visual inspections of cylinders before each outing reduces the risk of an emergency by 90%.
Care, storage and repair
After each operation, the boat must be thoroughly washed with fresh water, especially if you have been swimming in salt water or a body of water with abundant vegetation. Sand and salt destroy the material and accessories. Dry the boat should be in the shade, completely straightened, so that there is no moisture inside, which can cause mold or unpleasant smell.
The best storage bag is a special bag, but only after the boat has completely dried. You can't fold the wet product. The optimal storage temperature is room temperature, away from the heaters. If possible, keep the boat half-blown to avoid claws in the folds.
In the case of a puncture, you should not panic. The repair kit that comes with the kit allows you to eliminate most damage in the field. For more serious damage, such as joints divergence or transom damage, it is better to contact a specialized service. guarantee.
- 🧼 Wash the boat with a soft sponge without using aggressive chemistry.
- 🌡️ Avoid storage at temperatures below -10C and above +50C.
- 🛠️ Check the valves for leakage with a soap solution.
Frequently Asked Questions (FAQ)
Can I install the engine on the Intex boat without a transom?
Technically, you can use special suspension mounts or install the motor in the cockpit, but this is extremely unsafe and not recommended by the manufacturer. transom does not guarantee reliable fixation of the engine, which may lead to its loss or overturning of the boat.
Which pump is best used to pump an Intex boat?
A regular foot pump is suitable for primary pumping, but for the final pressure (0.25 atm), its effort may not be enough; it is better to use an electric pump with the ability to adjust the pressure or a two-stage foot pump, the main thing is not to pump the cylinders above normal.
Do I need to register an Intex boat in GIMS?
According to the current legislation of the Russian Federation, boats weighing more than 200 kg (in running order) or with an engine power of more than 8 kW (about 10.8 hp) are subject to registration. Intex Low-power motors do not require registration, but the rules may change, so it is worth clarifying the current information.
How to seal a puncture at home?
Clean and degrease the puncture site, cut the patch out of the circular remix, apply glue on both surfaces, let it dry for 10-15 minutes, then press tightly and place it under load for several hours, and it's important to keep the surface dry and clean.