Choosing the first boat for fishing or family vacations on the water always involves many questions, especially when the budget is limited and reliability requirements are high. BoatWise 300S Samurai It has proven to be an affordable option for one or two people, able to withstand a little motorization, and many newcomers are looking for a balance between price, quality and functionality that doesn't overpay for the extra options.
In this article we will analyze in detail the design features of this model, analyze the behavior of a boat on the water with an outboard motor and give recommendations for operation. BoatWise 300S inflatable boat It often becomes a subject of disputes because of its budget, but competent use allows you to get the most from it, turning it into a reliable assistant on the pond.
It's worth noting right away that this is not a racing car or a storm boat, but a utilitarian vessel for calm water. PVC boats This will help to avoid disappointment and ensure a long life of the product, and then we will move on to the technical details that determine the nature of this boat.
Structural features and materials of the body
The basis of any quality boat is the material from which it is made. BoatWise 300S reinforced PVC material This is a standard indicator for the budget and mid-size segment, providing sufficient resistance to mechanical damage and ultraviolet radiation. Unlike cheaper analogues, it uses a five-layer fabric, which increases the tightness and strength of the seams.
The design of the bottom is made by technology Flat Floor It's a classic solution for boats up to 3 meters long, and it offers excellent parking and slow-moving stability, which is critical for throwing, but it's worth considering that a flat bottom is less effective at extinguishing high-speed wave shocks than high-pressure inflatable floorboards.
⚠️ Warning: Despite the high density of the material, do not leave a fully inflated boat in direct sunlight for a long time unattended. The air pressure inside the cylinders may exceed the permissible limits, which will lead to deformation of the seams.
To strengthen the structure in the most vulnerable places - at the joints of cylinders and in the areas of attachment of cans - additional linings from the same PVC are applied. strengthening of critical areasThis is a very effective way of extending the life of the product when it is used actively, and the seams are made by hot gluing, which ensures that they are tight and resistant to stratification even in cold water.
In the nose is located inflatable kielsonIt's a system that runs along the bottom, and it's not only designed to protect the balloon from abrasion on the bottom, but also to give the boat a longitudinal rigidity. outboard, since the keelson takes on a portion of the vibrational load transmitted from the transom.
Equipment and ergonomics of internal space
The interior space of the model BoatWise 300S Designed to accommodate one, maximum two people with a minimum set of equipment, standard equipment includes two inflatable seats (banks) that can move along the sides and be fixed in special pockets-holders. centre-up depending on the weight of passengers and cargo.
The trawler is made of moisture-resistant plywood and is painted with special water-resistant paint, it has a rigid attachment to cylinders and is reinforced with a bolt. carry-knobsThese are located in the bow and aft cylinders, made of strong PVC and are firmly pasted into the material.
The valve system deserves special attention. BoatWise 300S They use petal valves that allow the boat to pump quickly and blow air out just as quickly, and they're reliable and rarely fail if you don't let sand and small debris get inside the machine.
The small pocket or the option of attaching additional equipment is often provided for storing small items in the nose of the cylinder, and the ergonomics of landing on the cans are also thought out: the seats are rigid enough not to bend under the weight of an adult, and are covered with anti-slip material.
Motorization: engine selection and installation on the transom
One of the key issues when buying is the choice of motor. BoatWise 300S Samurai Officially designed for the installation of outboard motors with a capacity of up to 5 hp, although many owners successfully operate it with engines up to 8-9.8 hp It is important to understand that exceeding the recommended power requires special care and experience management.
When installing the engine, you must strictly observe the mounting technology. The boat's trawl is standard height, but the angle of inclination of the engine may require adjustment with the washers or the adjusting screw of the engine itself. The wrong angle of the trim can lead to the boat digging with its nose or, conversely, to the stern.
The subtleties of installing the engine on a PVC boat
When installing the motor, make sure that the lower unit does not touch the inflatable elements of the cylinders, even when rocking hard. Use transom wheels or additional protection if you plan to often pull the boat ashore with the engine installed. Also check the puff of the rods before each step on the water.
With a 3-5 hp engine, the boat can reach speeds of about 15-20 km/h with one person on board, enough to move between fishing points or to enter the middle of a reservoir. 9.8 hpThe speed can rise to 25-28 km / h, but the handling on the wave will deteriorate due to the flat bottom.
To protect the transom from abrasion and blows by lower unit, it is recommended to use a special squirt Or you can glue an extra layer of rubber at the point of contact, and that simple action will significantly extend the life of the stern of the boat.
Driving qualities and behavior on the water
On the water. BoatWise 300S It's predictable and stable, and because of the wide shape of the cylinders, the boat has good initial stability, and it's very easy to get up in it to throw the spinning, although it requires some skill, but you have to remember that this is not a keel boat, and sudden movements can lead to a strong swing.
When motorized, the boat goes into planing quite quickly, especially with one operator. The flat bottom creates a characteristic slapping sound when hitting a wave, which can be tiring when you go through a long choppy water transition. water-hole: lakes, rivers with a quiet current and reservoirs in calm.
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 300cm | Dimension inflated condition |
| Width | 135cm | Provides sustainability |
| Load capacity | 250 kg | Including boat and motor weight |
| Passenger capacity | 2 people. | Comfortable for 1+ equipment |
| Boat weight | ~23 kg | Without motor and accessories |
The important aspect is sailing. High cylinders create a large area that perceives the wind. When the wind is stronger than 5-7 m / s, it becomes more difficult to operate the boat, and it begins to drift. anchor-fill The anchor is a must for safe fishing.
Use a 3-4kg anchor cat for a 3m long boat, which is the optimal weight that will keep the boat flowing but will not be too heavy to carry in the bag.
Assembly, pumping and preparation for launching
Preparation process BoatWise 300S It takes about 10 to 15 minutes to get out, if you have experience, and the first thing you do is to spread the boat on a flat surface, clearing the area of sharp objects, branches and stones, and even a small knot can damage the material when pumped.
The pumping is recommended in several stages. First, the cylinders are pumped to a state of elasticity, then the floorboard is laid and fixed (in this model it is inflatable or hard, depending on the modification, but more often in the 300S an inflatable floor or soft floorboard is used), and only after that the final pumping to the working pressure is made.
☑️ Checklist for boat preparation
For pumping, it is best to use a foot or hand pump with a pressure gauge. Compressors are only possible with a low pressure reducer, since overheating of air and pressure surges can damage the air. seamAfter pumping, be sure to check the pressure again, as it can rise in the sun.
When you put the boat back in the bag, it's important to keep it clean. The sand that gets inside the bag works like an abrasive on the next fold. If the boat is wet, it's advisable to dry it, but if you can't, keep it unfolded at home until it's completely dry to avoid mold and unpleasant smells.
Care, storage and extension of service life
Durability BoatWise 300S The PVC material is not only afraid of punctures, but also of chemical effects, as well as being in a long compressed state under load. After each use, the boat must be washed with fresh water, especially if you have been swimming in salt water or a body of water with blooming water.
Keep the boat in a cover, in a dry room at a temperature of -30 to +50 degrees Celsius. However, room temperature is considered optimal. It is not recommended to keep the boat near heating appliances or open fire sources. Periodically, once a season, check the condition of the seams and treat them with special treatment if necessary. protective compounds for PVC.
⚠️ Warning: Never use aggressive solvents, gasoline, acetone or chlorine-containing agents to clean the boat, which destroy the polymer structure of the tissue, making it brittle and reducing leakage.
If you find a small puncture or cut, do not delay repairs. Complete with the boat usually comes a remake with liquid glue and patches. For quality repairs, the surface must be degreased (but not with a solvent, but with a special PVC degrease), clean and paste the patch with a warm-up hair dryer or under the load, depending on the type of glue.
Regular inspection of fittings, handles and can holders is also mandatory. Weakened elements can cause equipment loss or even injury on the water. timber It protects the board when mooring and must be whole.
Proper storage and regular cleaning of the boat from dirt and salt increase its service life by two times, maintaining the elasticity of the material and the strength of the seams.
Can I use the BoatWise 300S in winter?
The use of PVC boats in winter is possible, but with limitations: the material in the cold becomes rigid and less elastic, which increases the risk of damage when hitting the ice. Air pressure also drops when the temperature decreases, so the boat needs to be pumped out on the water. Keep the boat warm in the winter.
What is the maximum weight of the boat?
rated carrying capacity is 250 kg. This is the total weight of people, motor, fuel and equipment. For comfortable and safe operation, it is recommended to load the boat at no more than 80% of the maximum, that is, about 200 kg, to maintain a high landing and buoyancy margin.
Do I need to register a boat with GIMS?
According to the current legislation of the Russian Federation, inflatable boats with a carrying capacity of less than 225 kg and with an engine capacity of less than 8 hp (inclusive) are not subject to registration. BoatWise 300S has a load capacity of 250 kg, formally it requires registration, even if the engine is weaker than 8 hp However, in practice, the requirements can be interpreted differently, and this issue should be clarified in the local branch of GIMS.
How to properly seal a puncture in the field?
For field repairs, use self-adhesive patches made from the remix. The surface should be dry and clean. The patch is applied with a margin of 2-3 cm around the damage. Full glue with liquid glue takes time to dry and no moisture, so in the field it is difficult.