Water element requires a special approach to equipment, and a reliable boat becomes a key element here. Inflatable fishing boat 2 local for an outboard motor It's not just an accessory, it's a complex engineering product that makes you feel comfortable and safe, and fishermen often face the difficult choices between ease of carrying, load capacity and wave resistance.
The modern market offers many options, but not all of them are equally useful. A well-chosen vessel will allow you to reach the cherished brows where a large predator is standing and stay there for several hours without discomfort. It is important to consider many factors, from the material of the cylinders to the shape of the bottom, which directly affects the performance.
In this article, we will discuss all the nuances of choice in detail so that you do not waste money. PVC And so different densities behave differently, and how motor power is related to body length, and understanding these processes will help you become more confident with the water and focus on the catch.
The criteria for choosing the ideal boat for two
When choosing a boat for two fishermen, it is important to carry the load capacity: a two-seater boat must withstand not only the weight of two adult men, but also a full set of equipment, an anchor, a gas tank and possibly a fish caught. Load capacity This is the first thing to look at in a technical data sheet, ignoring the marketing tricks about “capacity”.
Size matters, but don't chase gigantism. The optimal length for two varies from 320 to 380 cm. Shorter models will be cramped and overly long harder to transport and pump. Width also plays a role: narrow models are faster but less stable when standing up or actively hauling out a trophy.
Do not forget about the types of bottom, for calm water and small ponds suitable. NDMA (low pressure inflatable floor) which provides excellent comfort, but for large water areas and waveways, hard plywood or aluminum floorboard is preferable, which ensures rigidity of the structure.
- 🚣♂️ Dimensions: The optimal length is 320-360 cm for balance of speed and comfort.
- ⚖️ Weight: Keep in mind that the boat with a floorboard bottom will have to be dragged in disassembled form.
- 🌊 Height of the board: For the wave, the board is desirable at least 40-45 cm to protect against splashes.
Pay special attention to the number of inflatable compartments, at least two, but better three or four, and it's a matter of your safety, if one cylinder is punctured, the rest of the boat will keep afloat, allowing you to row safely to the shore.
Materials and construction: PVC vs. other solutions
The basis of a modern inflatable boat is polyvinyl chloride, which is not a simple film, but a multi-layer reinforced material. Reinforcing cordTissue density is an important parameter, but maximum density blindness (e.g., 1100 g/sq.m.) is not always justified by special additives.
For fishing, the density of 850-950 g/sq.m. is usually sufficient. The denser fabric is heavier, harder in the cold and harder to glue, although it is considered more "impenetrable". However, the quality fabric is 850 g/sq.m. from a proven manufacturer (for example, Heytex or Yuanming) will last decades with care.
⚠️ Attention: Cheap boats made of Oxford or thin PVC quickly lose elasticity and can burst in the sun. Don't skimp on material if you plan to fish actively.
Seam design is also critical. There are two main methods: gluing and welding. Glued seams made with two-component adhesive often prove stronger than the material itself. Welds are typical of cheap models and may be less reliable under dynamic loads.
- 🧵 Reinforcement: Look for 5-layer fabric for maximum strength.
- ☀️ UV protection: You need to prevent the destruction of the polymer structure.
- 🧊 Frost resistance: High-quality PVC retains elasticity at negative temperatures.
Trans plate and engine power
The key feature of the motor request is the presence of a transom, which is a rigid insert in the aft part, designed to hold the engine. transom plate It is made of moisture-resistant plywood (usually 12-18 mm) or composite materials, and it is important that it is firmly pasted into cylinders and reinforced with a hinged beam.
The power of the permissible motor depends on the length of the boat and the design of the transom. For two-seater models (320-360 cm), the optimal range is from 5 to 9.9 hp Installing an overly powerful motor on a light boat can lead to yaw, loss of controllability and even tipping.
There is also the concept of "permissible power" specified by the manufacturer, which is not only dangerous, but can also cause a warranty repair to be denied in the event of a breakdown. For fishing, 5 hp engines are often used, as they are light, economical and allow a speed of about 20-25 km / h, which is quite enough.
If you plan to walk alone often, consider the possibility of shifting the motor or using an electric motor. The electric motors are quiet, which is ideal for hunting pike or perch, but require heavy batteries, which reduces the overall payload.
How to increase the service life of the transom?
To prolong the life of the transom plate, it is recommended to loosen the engine's downturn screws after each fishing trip to relieve the tension from the plywood, and it is also useful to treat the ends of the transmolphin with moisture-repellent compounds once a season.
Comfort and ergonomics on fishing
Fishing is a long process, so the ease of landing comes to the fore. In a two-seater boat, space is limited, and it is important to properly organize the internal volume. Banks. (seats) should be adjustable or removable so that the center of gravity can be changed or space for gear can be made.
Presence fish-leaver And you can hang a wire, a sound sounder, or just hold on to a high wave, and you can also see that there are special rod mounts and anchor rods in the bow.
| Characterization | Impact on fishing | Recommendation |
|---|---|---|
| Type of bottom | Resilience and comfort standing | NDND for comfort, plywood for speed |
| Seat height | Leg and back fatigue | It is desirable to have soft linings |
| Position of cylinders | Freedom of rowing and throwing | The narrowed nose for convenience |
| Presence of keel tape | Bottom protection and course stability | Mandatory for rocky shores |
The color scheme is also not to be ignored: bright colors (orange, salad) are safer, as the boat is better visible on the water to other boatmasters, but for fishing, camouflage or dark green colors are often chosen to avoid scaring the fish, although this is of secondary importance on large bodies of water.
- 🎣 Accessories: The presence of hinges for anchor cable is mandatory.
- 🎒 Transport: Check if the boat will fit into the trunk of your car.
- 🔧 Repairability: The kit should include a belt set with valves and patches.
Safety: What to Know Before Descent
An inflatable boat is still a balloon with air, and you need to treat it with respect. Pressure. In cylinders, the manufacturer must strictly comply with the manufacturer's recommendations (usually 0.2 atm), a subpumped boat loses its rigidity and handling, and a pumped in the sun can burst due to air expansion.
⚠️ Warning: Never leave a pumped boat ashore in direct sunlight unattended, heating the air inside the cylinders causes a sharp increase in pressure and rupture of the seams.
Using life jackets is not just a formality, it's a necessity. Even experienced swimmers in cold water can faint from impact or sharp cooling. The vest must be matched to size and fastened.
☑️ Checking before getting on the water
Also worth mentioning is anchoring. For a two-seater boat, the weight of the anchor should be about 1/10 of the displacement, but not less than 3-4 kg. Using an anchor that is too heavy is dangerous: in high winds or currents, the boat can turn over if it catches an obstacle with its nose.
Always carry a knife. It should be easily accessible so that if you get entangled in the nets, algae or anchor cable, you can instantly free yourself. A stupid knife or a knife in a sealer on the bottom of the boat at a critical moment is useless.
Popular models and their features
There are many brands on the market, both domestic and imported, and the leaders in the two-seater powered boat segment are often the ones that are the leaders. Flagship, hunter, brig and AquaEach model has its own design features.
For example, Flagman's Ural series is famous for its reinforced cylinders and wide cockpit, which is convenient for catching both. Models from Brig often have a more seamless nose shape, better cut wave, but can be heavier in transportation. hunter Offers affordable options with a good value for money for beginners.
When buying a used boat, be sure to check the valves for air etching, put soapy solution on the space around the valves and see if bubbles appear.
When you choose a particular model, read the feedback of real owners about the durability of the seams and the quality of the fittings. Often the fabric itself lasts 10 years, and plastic handles or holders of oars break in the first season.
The best boat is not the most expensive, but the one that is perfect for your fishing conditions and transportation opportunities.
Care and storage of craft
And flyboat After every fishing trip, especially in salt water or in overgrown water, the boat needs to be washed with fresh water, and the sand and silt, when dried, act as an abrasive, damaging the PVC protective layer.
Drying is a critical step. You can't fold a wet boat, because it will cause mold to break down the fabric from the inside, and it will oxidize the seams, and you need to dry in the shade, straighten it completely, so that there is no moisture left in the folds.
Keep the boat spread out or half-assembled in a warm room. If this is not possible, and the boat is stored in the garage in winter, watch the temperature: extreme frost makes PVC brittle, and careless movement can lead to microcracks.
- 🧼 Wash: Use only soft sponges and special PVC products.
- ☀️ Drying: Only in the shade, direct sunlight damages wet tissue.
- 📦 Packaging: Do not keep the boat in a sealed bag unless it is perfectly dry.
How to properly seal a puncture in the field?
For emergency repairs, use a patch from the slat. Clean the area around the puncture (you can use a lighter to degrease, but carefully), apply the glue on both surfaces, let it dry for 5-10 minutes, then press hard and warm up (with a hair dryer or warm water).
Is it possible to use a boat in winter?
You can use PVC boats in winter, but with caution. The material in the cold bluffs. Pump the boat in the warm, and in the cold the pressure will fall - this is normal. Do not drop the boat on the ice and avoid contact with sharp ice edges. After fishing, be sure to let the boat warm up in the warmth before packing.
Which anchor is better for a two-seater boat?
The optimal anchors are cats or Hall anchors, which have a good hook and are compactly folded, and the weight of the anchor for a boat 3.2-3.6 meters long should be 3-5 kg depending on the current and wind, and using too light anchors will lead to permanent demolition of the boat from the fishing point.
Do I need to register a boat with GIMS?
According to the current rules of the Russian Federation, registration is subject to small vessels weighing more than 200 kg (in running order) OR with an engine power of more than 8 kW (about 10.88 hp). If your two-seater boat weighs less than 200 kg with the engine and you put the engine up to 10 hp, registration may not be required, but the rules may change, so check the current information in the local offices of the GIMS.