Choosing the first swimmer is always about balancing cost, reliability and functionality. In the low-cost PVC inflatable boat segment, the model deserves special attention. Flinc FT320KThe boat, which has been a popular fishing and hunting boat for several years, attracts customers with its versatility: it is compact enough to be transported in the trunk of a sedan, but also has a safety margin that allows you to feel confident in the big water.
The main feature of this model is the use of reinforced PVC It's a high-density boat that's resistant to abrasion and UV light, and many new water-engineers mistakenly believe that a cheap boat can't be reliable, but it's a practice to operate. Flinc FT320K Proof of the opposite: Proper assembly and compliance with operating rules allow this vessel to last for years without losing its tightness.
In this article, we will take a detailed look at design features, conduct a virtual crash test of performance and answer the most common questions that arise from potential owners: you will learn how the engine is optimal for this length, how to properly prepare the boat for the first launch, and what hidden advantages this model has compared to competitors.
Structural features and materials of the body
The basis of durability of any inflatable boat is the material from which the cylinders are made. Flinc FT320K The manufacturer uses a five-layer reinforced PVC, and this material consists of two outer layers of polyvinyl chloride and three inner layers, where the reinforcement mesh of synthetic threads is located. high-strengthIt allows you to withstand pressure and mechanical stress.
The stitches on the model are hot glued, which is the standard of quality for this price segment. Unlike cold gluing, the hot method provides a more reliable and durable connection, resistant to temperature changes. It is important to note that all the seams are duplicated, which minimizes the risk of depressurization even under extreme loads.
⚠️ Warning: Do not use high-pressure compressors when the boat is first pumped; heating air during rapid pumping can cause the seams to rupture; pump the cylinders manually or pause to let the air cool.
Boat bottom made by technology Air Deck This solution provides a hard surface comparable to plywood slate, but it significantly reduces the overall weight of the structure. For a 320 cm model, this is a critical parameter, as it affects assembly speed and ease of carrying.
Before long periods of sun exposure, always pour some air out of the cylinders. When heated, the air expands, and the excess pressure can damage the seams or deform the bottom.
Balloon geometry and driving performance
The shape of the cylinders Flinc FT320K The round nose and narrowed stern parts are designed to make the sleeve better, and when the engine is installed, the boat behaves predictably, not squeezing and confidently holding the wave, and the cylinders are 36 cm in diameter, which ensures excellent performance. loading capacity And resilience.
The increased diameter of the cylinders makes the boat highly buoyant, meaning that even when fully loaded with two passengers and a cargo, the sides remain high enough above the water, minimizing the risk of being overwhelmed by the wave, which is a key safety factor for fishing in windy weather or during the course.
- 🚣♂️ Sustainability: The wide cockpit and high board provide comfortable accommodation for two people with things.
- 🌊 cruising: Optimal geometry allows you to reach speeds of up to 25 km / h with a 5 hp engine.
- 🎣 Universality: Suitable for both quiet fishing and active rafting.
It is worth noting that the stiffness of the inflatable floor High Pressure It allows you to stand up in full height, which is highly appreciated by spinning anglers. However, in high winds, the sailing of the boat can be high, so it is recommended to use an anchor or a drag cat to fix the position.
Completement and ergonomics
The manufacturer has tried to complete the model as much as possible so that the buyer can immediately get on the water. The basic set includes not only the boat itself, but also all the necessary accessories for comfortable operation. The quality of the accessories, including valves and handles, is at a decent level.
The attachment system deserves special attention. transomIt is designed reliably and allows you to install engines weighing up to 15 kg without the risk of distortion, the Tran is painted with a special moisture-proof paint that prevents plywood from rotting.
Inside the cockpit are comfortable handles for rowing and mounting under the cans, banks (seats) have soft upholstery, which allows you to stay in the boat for a long time without discomfort, and there are liner cords around the perimeter of the cylinders, which you can hold on to or attach equipment.
☑️ Checking the completeness when buying
The packaged dimensions allow the boat to be transported in public transport or the trunk of a passenger car, the bag is made of durable fabric with water-repellent impregnation and has convenient straps for carrying behind the back.
Technical specifications and compatibility with motors
To understand the potential Flinc FT320K This data will help you to find the optimal engine and calculate the load capacity, and it belongs to the class of boats with a length of 3.2 meters, which is the "golden mean" for single-to-double use.
Below is a table with the main technical parameters that will help you make an informed decision about the purchase.
| Parameter | Meaning |
|---|---|
| Full length | 320 cm |
| Full width | 142 cm |
| Diameter of the cylinder | 36 cm |
| Load capacity | 420 kg |
| Boat weight | 21.5 kg |
The recommended engine power for this model is 2 to 5 horsepower. Installing a 5 hp engine allows you to bring a boat with two passengers to planing. The use of more powerful engines is not recommended, as this can lead to transom overload and reduced safety.
The secret of long service transnez
After each fishing, be sure to remove the engine and dry the transom. Even moisture-protected plywood can eventually dissipate from constant contact with water if you leave the motor fixed for a long time.
It is important to bear in mind that maximum load The 420 kg is distributed among passengers, motor, fuel and equipment, and the real buoyancy reserve allows you to carry about 300-350 kg of payload on board, subject to safety measures.
Comparison with competitors and market positioning
In the inflatable boat market Flinc FT320K It competes with brands such as Flagman, hunter and YukonThe main advantage of Flinc is the value for money of the PVC used. Many competitors in this price category use a material of lower density, which affects the life of the PVC.
Unlike the more expensive ones, it lacks an inflatable keel, which makes assembly easier but slightly reduces course stability at high speeds. However, for fishing and cruising at moderate speeds, this is not a critical disadvantage. The boat remains maneuverable and easy to operate.
⚠️ Warning: Do not keep the boat inflated in the cold. PVC loses elasticity at low temperatures and can crack when mechanically exposed or pressure drops.
Customers often say that weight The boats may differ slightly from the passport due to the production and humidity of the material, which is normal for PVC products, and a deviation of 0.5-1 kg does not affect the performance.
Rules of operation and care of PVC
And Flinc FT320K You've been happy for years, and you have to follow simple rules of operation, and PVC's main enemy is sharp objects and improper storage, and before each pump, check where the boat is set up for thorns, broken glass or sharp stones.
After use, be sure to wash the boat with fresh water, especially if you have been swimming in salt water. salt crystallizes and can damage the structure of the material. Drying should take place in the shade, as direct sunlight combined with heating can lead to deformation.
- 🧼 Cleanup: Use a soft sponge and soapy solution to remove dirt.
- ☀️ Drying: Dry the boat only in a fully disassembled and open form.
- 📦 Storage: Store in a dry room at a temperature of -20 to +40 degrees.
Regularly check the pressure in the cylinders with a pressure gauge. Insufficient pressure reduces the rigidity of the structure and driving performance, and excessive pressure creates a risk of rupture of the seams. The optimal working pressure is indicated in the product passport and is usually 0.2 atmosphere.
The main enemy of the PVC boat is not water, but improper storage in a compressed state and exposure to ultraviolet light in an inflated form.
Frequently Asked Questions (FAQ)
Can I put on the Flinc FT320K engine more powerful than 5 hp?
Technically, it is possible to install, but the manufacturer does not recommend exceeding the power of 5 hp This is due to the design of the transom and overall safety. Excess power can lead to the destruction of the transom or loss of controllability of the boat.
How to seal a puncture in the field?
It comes with a patch and glue remake, and for good repair, you need to degrease the surface, glue both surfaces, dry, apply a second layer, and press the patch hard, and in the field, you can use a tourniquet or sealant as a temporary solution.
How many people are comfortably accommodated in this boat?
Passport capacity is 2 people, comfortable with two adults of medium build with a small amount of equipment, and for three people, the boat will be overloaded, which is dangerous.
Do I need to register this boat with GIMS?
According to the current legislation of the Russian Federation, boats with a loaded vessel weighing more than 200 kg or with an engine power of more than 8 hp (or 10 hp depending on the year of issue of the regulations, 8 hp is relevant). The weight of the Flinc FT320K boat is about 21.5 kg, so with an engine up to 8 hp registration is not required. However, laws may change, and the final decision depends on the inspector on the spot.