Choosing a boat to get on the water is always a compromise between size, load capacity and ease of transportation. Flinc FT320LA It has a special place in offering users a reliable platform for fishing and cruising, and it attracts attention with its form factor, which balances between lightweight single-seater dishes and full-fledged two-seater classics, which many water-engineers consider to be the optimal size for frequent trips to the pond without a trailer.
The design of the model is based on time-tested solutions, but has a number of features that are worth knowing before buying. inflatable floor This one, which is LA, significantly reduces the weight of the product, but it changes the behavior of the wave, and if you're going to use the boat not only in calm, but also in a little wind, you're going to need to study the seaworthiness in detail, and that's what we're going to do in depth.
In this article we will analyze the technical specifications, quality of materials and real feelings of operation. Flinc FT320LAWe're not going to recapitulate the dry numbers from the passport, but we're going to focus on how the boat behaves in real life, and that's going to help you make an informed decision about whether to buy this particular model for your purposes.
Design features and geometry of the body
The basis of the boat is a balloon system made of five-layer reinforced material. Flinc FT320LA The nose has a distinctive shape that effectively cuts the wave, preventing splashes from flooding into the cockpit, which is critical given the relatively low side of this model.
The most important element of the design is bottom (Air Deck) Unlike the paillon floors, you don't need to assemble and disassemble heavy aluminum or plywood sheets, you just pump the cylinders and the bottom, and then the boat is ready to launch, which is a solution that speeds up the preparation process, but requires careful attention to the pressure in the compartments.
- 🛡️ Material: Used dense PVC reinforced, resistant to abrasion and ultraviolet, which prolongs the service life of the product.
- ⚓ KILSON: The design provides an inflatable keelson, which gives the bottom rigidity and improves course stability during movement.
- 🔒 Fixtures: The presence of a liner cable around the perimeter allows you to securely secure the boat on the pier or during parking.
The quality of the seams and gluing is worth noting. The manufacturer uses a flap-coated bonding technology that ensures high tightness of the joints. However, when operating on rocky shores or in grassy water bodies, it is recommended to use a protective tape or a mat, since the inflatable floor is more vulnerable to punctures than hard peyol.
⚠️ Attention: When pumping the inflatable floor, carefully monitor the pressure. Pumped in the heat bottom can deform the sides, and under-pumped - create a hammock effect, which will reduce the stability of the boat on the water.
Comfort and ergonomics of the cockpit
Interior space Flinc FT320LA It's designed to accommodate one or two people, and for one fisherman, there's an ample space for gear, anchor, even a small refrigerator, and if you plan to sit together, the space becomes limited, and you have to plan carefully.
Seats (banks) in the configuration usually come removable, from plywood with coating. They are installed in liktros (pockets) on the inside of the cylinders or on special stops. Adjustment of seating position It allows you to shift the center of gravity of the boat, which is especially important when using an outboard motor of different power or when fishing with a passenger.
The issue of paddle comfort is particularly noteworthy: in calm or in low winds, the use of oars is justified. However, due to the wide stern and shape of the bottom, the boat may be reluctant to keep its course when rowing against the wind. FT320LA leave it for motor propulsion.
To increase comfort during long fishing, install soft overhead seats on the cans, which will reduce the load on the spine and allow you to stay on the water longer without fatigue.
Motor potential and driving performance
transom plate Flinc FT320LA It's made of moisture-resistant plywood and reinforced with linings, designed to accommodate outboard motors up to 5-6 hp (depending on the transom modification, check the passport), and for a given size, the hull is large enough to put the boat in a one-person planing mode with minimal cargo.
The boat behaves predictably on the water. The inflatable floor cushions the impacts of a small wave, providing a soft ride. However, due to the lack of a hard keel, the course stability may be lower than that of keel models with a hard bottom. When driving at high speed, there can be yaw, requiring constant adjustment with the tiller.
| Parameter | Meaning | Comments |
|---|---|---|
| Full length | 320 cm | Optimal for storage in the trunk |
| Full width | 136 cm | Provides good stability |
| Load capacity | 400 kg | Considering the weight of the boat and the motor |
| Engine power | up to 6 hp | Recommended range of 2-4 hp |
It's important to get the right engine diewood, and a leg that's too long can create additional drag, and a leg that's too short can lead to cavitation, and you can experimentally adjust the angle of the engine to maximize efficiency and minimize fuel consumption.
Transportability and weight
One of the main trump cards of the model Flinc FT320LA When assembled, without motor or gear, the boat weighs much less than its mutuale counterparts, and this allows it to be transported in the trunk of a C or even D passenger car without requiring a roof box or trailer.
The assembly and disassembly process takes an average of 15-20 minutes with experience; for a beginner, it can take up to 40 minutes at first; and the presence of high pressure valves accelerates pumping, especially if an electric pump from a car battery is used.
☑️ Pre-packaging check
When transported in the winter season, the PVC material becomes less elastic. It is not recommended to pack and fold a frozen boat in a tight bag.It can cause microcracks in the folding areas, so let it warm at room temperature before packing or storing.
Care, maintenance and durability
And Flinc FT320LA And you have to follow the simple rules of operation, and every time you go out, especially in salt waters or in overgrown algae areas, you have to wash the boat with fresh water, and the salt and organics destroy the PVC structure and the adhesive seams.
Storage should be carried out in a dry, ventilated room, away from heating appliances and direct sunlight. The optimal storage temperature is from -20 to +30 degrees Celsius. Regular pumping of cylinders before the season will help detect slow air leaks, if they occur.
- 🧼 Cleanup: Use a soft sponge and special PVC products, avoid aggressive chemicals and solvents.
- 🔧 Repair: The kit is usually a remake. For small punctures, glue and patches are enough, for serious damage, it is better to contact the service.
- 💨 Pressure: Check the pressure with a pressure gauge regularly, as it varies depending on the ambient temperature.
⚠️ Warning: Never leave a fully pumped boat in direct sunlight for long periods of time unattended, with pressure inside the cylinders rising, which can cause the joints or valves to rupture.
Comparison with analogues and final conclusions
There are many similarities on the market, such as boats from the Flagman, Yukon or Boats. Flinc FT320LA It's a good balance of cost and performance, and competitors often either sacrifice tissue density to lose weight or make the boat too heavy, and there's a middle ground here.
Compared to the pit models, the loss will be in the rigidity of the floor and the possibility of reaching a more serious wave, but the gain in assembly speed and weight overcomes this disadvantage for most use cases on small water bodies, lakes and calm rivers.
The secret to long-term valve service
Periodically lubricate the rubber valve seals with silicone lubrication, which will prevent them from drying out and ensure leakproofness for many seasons.
In conclusion, it may be said that Flinc FT320LA It's a great choice for people who value mobility and don't want to sacrifice safety, a reliable workhorse for a single fisherman or a couple who likes quiet walks, and with care, it will last for more than one season, giving you the emotion of communicating with water.
The Flinc FT320LA is the perfect compromise between weight, dimensions and usable cockpit area for compact transportation and storage.
What is the maximum speed of the Flinc FT320LA?
With a 5 hp engine and one person, the speed can reach 20-25 km/h in planing mode. With two passengers, the boat will move in displacement mode at a speed of about 8-10 km/h.
Can we put a sonar on this boat?
Yes, you can. On the transom plate or on a special bracket attached to the sides, the sonar sensor is easily placed, the main thing is to adjust the sensitivity correctly so that the propeller does not cause interference.
Do I need to register Flinc FT320LA in GIMS?
According to the current legislation of the Russian Federation, boats weighing more than 200 kg (in running order) or with an engine of more than 8 hp (for boats up to 3 meters long) are subject to registration. Flinc FT320LA with a low-power engine does not usually require registration, but the rules may change, clarify the current regulations.
How to keep a boat in the winter?
The boat should be thoroughly washed, dried, folded (not necessarily in the same package, you can just turn it around neatly) and removed in a dark place.