Choosing a boat for fishing or resting on the water always involves finding a balance between reliability, cost and functionality. Inser's inflatable boat For many years, it has been a strong presence in the Russian market, offering customers time-tested solutions, built in Ufa and known for its balanced approach to design and materials.
Unlike many competitors, the plant’s engineers rely on proven cylinder geometry and quality seams. PVC The fabric used in the production is strictly controlled, which ensures the durability of the product even in severe conditions of use, which is why many anglers prefer this brand, considering it the “golden mean” in the budget segment.
However, the variety of modifications can be confusing even for an experienced aqueous engine. In this article, we will discuss the design features in detail, compare popular series and give recommendations on choosing the best model for your tasks.
⚠️ Attention: When buying a used boat, be sure to check the release date of the PVC material, since the shelf life of the fabric before assembly is limited, and the aging of the material is difficult to visually determine.
Design features and materials used
The basis of any inflatable boat is the material from which its hull is made. PVC (polyvinyl chloride) with a density of 750 to 1100 g/sq.m. depending on the series, this material is highly resistant to abrasion, exposure to fuel and ultraviolet radiation.
The design of cylinders usually has a complex geometry with a timber around the perimeter. It is not just a decorative element, but an important functional part that protects the side from rubbing against the pier or reed. The internal structure of the cylinders includes special partitions that give the vessel the rigidity and shape necessary for good driving performance.
Keep the boat in a pumped state at room temperature at least once a season - this will help to identify micropunctures and "stripe" the folds at the seams.
An important element of the design is the transom. In Inser models, it can be hinged or stationary, made of moisture-resistant plywood with reinforced coating. transom plate It is under maximum load when moving, so the quality of its fastening and impregnation is given special attention.
- 🛡️ Use of reinforced PVC of increased density for the bottom and cylinders.
- 🧪 Two-component adhesive joint of seams, resistant to temperature changes.
- 🪵 Trawn made of multilayer plywood with protection from moisture and mechanical damage.
Overview of popular series and modifications
The range of the manufacturer is quite wide and divided into several key series, each of which is focused on nano-based operating conditions, understanding the differences between them will help you not to overpay for unnecessary functions or, conversely, not to buy a too weak vessel.
Series riff It's positioned as a versatile fishing and recreational solution, and it's a classic rowing boat or a motor rowing boat with a flat inflatable floor (ND) or a low-pressure inflatable floor (LDPB), and it's easy to transport and it's quick to assemble. Aqua Often, they are more compact models, ideal for a single person or short forays into calm water.
For those who plan to use heavy loads and powerful engines, the series with high pressure inflatable floor (HPD) is designed. These boats have excellent seaworthiness, better wave holding and allow high speed. keel-structure The bottom, which provides excellent course stability.
Special attention should be paid to the models with reinforced cylinders and protection from spines. They have an additional layer of material in critical areas, which significantly prolongs the life of the boat when disembarking on unequipped shore. The choice between series often boils down to the question: what is more important, minimum weight in deflated form or maximum comfort on the water?
Comparative table of model specifications
To make it easier to choose, we have prepared a composite table comparing key parameters of popular modifications, and note that the load capacity is indicated by the weight of passengers, equipment and the engine itself.
| Model | Length, m | Width, m. | Load capacity, kg | Max, engine power, hp. |
|---|---|---|---|---|
| Inzer Reef 290 | 2.90 | 1.40 | 350 | 5 |
| Inzer Aqua 320 | 3.20 | 1.50 | 450 | 9.9 |
| Inser Reef 360 NDLD | 3.60 | 1.65 | 600 | 15 |
| Insert Comby 400 | 4.00 | 1.75 | 750 | 25 |
And you can see from the table that as the boat length increases, the capacity and the power of the engine increases exponentially, but the weight of the kit in the package also increases. For fishing from the shore, where you often need to carry the boat, the optimal models are up to 320 cm long. If the boat is stored in a garage by the water or transported on a trailer, it makes sense to look towards more overall versions.
⚠️ Attention: Never exceed the maximum engine power specified in the data sheet, as this can lead to the collapse of the transom and the boat overturning at full speed.
Advantages of inflatable floor (ND and BND)
Modern inflatable boats are increasingly being fitted with high-pressure bottoms. Technology Drop Stitch (thousands of threads connecting the upper and lower planes) allows you to pump the bottom to 1 atmosphere or more, resulting in a rigid surface, not inferior to plywood, but with much less weight.
The main advantage of NDND is that the package does not have rigid elements, so the inflatable floor boat is packed in one bag, which is critical for small car owners, and it also provides better shock absorption when hitting a wave, making the move softer.
Why is NDT more expensive than NDT?
High-pressure inflatable bottoms require more sophisticated manufacturing technology, the use of expensive valves and more material, which increases the cost.
But remember, it takes longer to get a boat to go down with NDNDM, and you have to pump not only the cylinders, but also the bottom sections, which requires a good pump (feather or electric). flat-bottom (ND) is pumped faster, but loses in seaworthiness and comfort of standing in full growth.
- 🎒 Packaging compactness: All items in one bag.
- 🌊 Excellent hydrodynamics and the possibility of planing with low power.
- 🛡️ High resistance to punctures due to the multilayer structure.
Choice of motor and attachment equipment
The right choice of engine is the key to safe and comfortable operation. For boats Inzer up to 3 meters long, usually enough engine with a capacity of 2-5 hp Such engines are light, economical and allow you to feel confident on the water even for a beginner. For models with a length of 3.20-3.60 meters, the best choice will be a “nine” (9.9 hp), which, if necessary, can be forced to 15 hp.
When you choose an engine, pay attention to the length of the lower unit. For inflatable boats with high cylinders, standard length may not be enough, and you need a motor with an elongated lower unit, so that the screw does not capture air on the turns. anticavitationalwhich should be located below the bottom of the boat when planing.
Don't forget the attachments. Anchor, life jackets, pump and repair kit are the minimum required. Many Inzer models are equipped with plastic holders to fix gear and fishing rods, but their number is often limited, so installing additional equipment (stands, drawers) will not be superfluous.
☑️ Set for the first exit
Operation, care and storage
The durability of the Inzer boat depends on how you care for it. After each operation, especially in salt water, the boat must be rinsed with fresh water, which will wash away salt, sand and dirt, which can act as abrasive or cause corrosion of the fittings.
Drying is a critical step. Even if the boat seems dry, there may be moisture in the folds and under the stiffness elements. Keeping the wet boat rolled up is guaranteed to cause mold and break the adhesive seams. Dry the boat in the shade, avoiding direct sunlight, which can overheat the PVC.
The optimal storage temperature of the Inzer inflatable boat is from -20 ° C to +40 ° C, however, it is recommended to avoid sharp temperature changes and store the product in a heated room.In winter, it is better to keep the boat in straightened or semi-assembled form to avoid clogs of material. Regularly check the pressure in the cylinders: a boat pumped in the sun can burst, and a sub-pumped one can lose driving qualities and become vulnerable to punctures.
Compliance with the rules of drying and storage increases the life of the boat by 2-3 times, maintaining the elasticity of PVC and the strength of the seams.
Frequently Asked Questions (FAQ)
What glue is best used to repair the Inser boat?
For repair of PVC products, it is best to use special two-component polyurethane adhesives, such as Texacol, Kleyberg or original remixes from the manufacturer. The use of "Moments" and other household adhesives is not recommended, as they may not withstand loads and temperature changes.
Can a boat be operated at low temperatures?
Operation is possible, but with caution: at low temperatures, PVC becomes less elastic and more susceptible to mechanical damage, pumping cylinders in the cold should be to a lower pressure, and transporting and assembling the boat very carefully, avoiding sudden movements.
How often should I check the pressure in the cylinders?
Pressure should be checked before each outing, pressure can rise and be ejected in hot weather, and pressure can fall in cold weather, requiring pumping, and the optimal working pressure is usually 0.2-0.25 Bar (indicated in the passport of a particular model).
Will the Inzer boat stand the rocky bottom?
PVC material has high tensile and abrasion resistance, but sharp stones are dangerous. models with reinforced bottom (density 1100 g/sq.m and above) are more stable, but in any case it is recommended to avoid dragging the boat on the rocks and use protective mats or keel belt when disembarking.