The modern angler or water walker is often faced with a difficult choice when it comes to purchasing a swimming aid. Riviera inflatable boat 3200 It is one of the rare examples on the market that combines affordable cost and time-tested design. This dimensional range, often referred to as the "folk" one, is ideal for those looking for a balance between compactness folded and spaciousness on the water. Many users choose this model for its versatility, allowing the use of the vessel for both quiet fishing and active recreation with family.
It is important to understand that Riviera 3200 It's not just a piece of paddled fabric, it's a complex piece of engineering that requires the right approach to operation. It's a boat that has an inflatable floor that has a significant impact on its performance and comfort of movement. Unlike hard floorboards, it's a system that allows you to quickly assemble and disassemble a vessel, although it has its own nuances in preparing for the water, and it's a detailed analysis of all aspects that will help you determine whether this model is suitable for your task.
Next, we'll look at the technical details, the materials, and the real-world capabilities of this boat in different operating conditions. polyvinyl chloride A certain density (PVC) is the standard for this class, and how to choose the right motor equipment. A competent approach to the selection of accessories and care for the product will extend its life for many years, while maintaining safety and reliability at a high level.
Technical specifications and design features
The fundamental element of any inflatable boat is the material from which it is made. Riviera 3200 commonly used PVC The thickness of the fabric often varies between 750 and 900 g/sq.m., providing the necessary safety margin for passing through shallow water with a rocky bottom. High-quality gluing of the seams by hot method guarantees tightness even when under load for long periods of time.
The key feature of this model is the type of bottom, most of the modifications use a high-pressure inflatable floor (see below).HIFLO or AirDeckThis solution allows for excellent hydrodynamics, as the bottom surface becomes rigid and flat, resembling plywood but without excess weight. The inflated bottom also acts as an additional shock absorber, softening the shocks against the wave and making the swing less noticeable to passengers.
⚠️ Attention: When pumping the inflatable floor, strictly monitor the pressure gauge. Excess pressure in hot weather can lead to rupture of internal bulkheads, and insufficient pressure will worsen driving performance and lead to rapid wear of the fabric.
The dimensions of the boat inflated condition allow you to comfortably accommodate two, and if necessary, three adults. The length of 320 cm and a width of about 140-150 cm create enough workspace for the angler. quilt It's a stable, stable, longitudinal stiffening beam, and it prevents the hull from deforming when it's moving on a plane, and all of these elements together form a robust, heavy-duty floating craft.
Effect of temperature on cylinder pressure
When the air temperature rises, the pressure inside the cylinders increases, if you pump the boat in a cool garage and then take it out in the sun, the pressure can rise by 15-20%. Always leave a small supply or intoxicate the air during operation to avoid critical overvoltage of the seam fabric.
Capacity and load capacity of the Riviera 3200
The issue of load capacity is critical to water safety. Riviera 3200 Usually around 400-500 kg, but the actual payload at which the boat maintains its best driving performance is lower. The weight of the boat, the engine, fuel, equipment and passengers must be considered. The optimal load for a confident exit to plane with a 5-8 hp engine should not exceed 200-250 kg.
Comfortable crew accommodation depends on the layout of the interior space. Having two inflatable seats (cans) allows you to distribute the weight of passengers evenly. However, if you plan to fish together, you should consider that active movements can destabilize the vessel. For trophy fishing with a lot of equipment, single operation will be the most efficient and safe.
It is important to note the importance of proper distribution of cargo. Centre of gravity It should be in the geometric center of the boat, or slightly shifted to the stern if you use a powerful motor, overloading the nose will lead to burrowing of the nose in the wave and slowing down, and overloading the stern will lead to dangerous differentiation and the risk of flooding with water through the transom.
| Parameter | Meaning | Note |
|---|---|---|
| Full length | 320 cm | Dimension inflated condition |
| Full width | 140-150 cm | Depends on the modification. |
| Load capacity | 500 kg | Maximum permissible |
| Passenger capacity | 2-3 people. | With equipment in mind |
| Boat weight | ~40-45 kg | Fully complete. |
Engine compartment and compatibility with engines
The trunk part of the boat Riviera 3200 The standard transom is a rigid plate protected from water by a layer of fiberglass or a special coating. The height of the transom is usually standard. Short Shaft (S) is 381 mm long, the most common standard for small and medium-powered motors.
Optimal engine power for this boat is in the range of 5 to 9.9 hp Engines with a capacity of 2-3.5 hp will allow you to confidently move against the current and get on plane mode with one person on board. Motors with a capacity of 8-10 hp will provide planing with two passengers and full gear, developing speeds up to 25-30 km / h Installation of more powerful units is not recommended due to the risk of transom damage and loss of controllability.
When installing the motor, use additional safety cables, run through the dice on the transom, which will prevent engine loss in the event of breakage of the rods or cut off of the transom plates when hitting an obstacle.
The important aspect is the fixation of the motor. The rods must be tightened reliably, but without excessive force, which can deform. squirt-boardRegularly check the condition of fasteners and lubricate them with anti-corrosion compounds, especially if you operate a boat on salt water. Proper installation of the motor affects not only speed, but also fuel consumption and engine life.
Package and additional accessories
Basic equipment of the boat Riviera 3200 The standard kit may vary by manufacturer and year of manufacture, but the standard kit usually includes the vessel itself, inflatable seats, pump, remix and bag-package. However, for full and safe operation, the owner often has to buy additional accessories that are not always included in the basic package.
Among the most useful additions, we should highlight the anchor system. For a boat of this size, an anchor weighing 3-5 kg is enough. It is also extremely important to have a safety end (the "line of life"), which is attached to the rump ring in the nose and allows you to quickly pick up a person who fell overboard. pump: foot models with a pressure gauge greatly simplify the preparation process, especially when pumping the bottom of high pressure.
- 🎣 The rod-holders: mounted on board or transom, free the hands of the fisherman.
- 🔦 Hanging table.: convenient platform for the placement of sonar, navigator or snacks.
- ⚓ Anchor rum: reinforced nose ring to anchor the anchor tack.
- 💡 Lighting equipmentLED ribbons or lights for safe movement at night.
The tuning of the boat allows you to adapt it to your specific needs. sonar On a removable bracket, the organization of sealed wires for things and the installation of a sun or rain awning make the Spartan boat a comfortable boat for day trips, the main thing in the modernization is not to overload the structure and keep the boat balanced.
Rules of operation and care of PVC
Durability of the boat Riviera 3200 Polyvinyl chloride is a durable material, but it's afraid of prolonged exposure to direct sunlight inflated state and aggressive chemicals. After every fishing trip, especially on salt water, the boat needs to be rinsed with fresh water to wash away the salt, sand and silt, which act as an abrasive.
Drying is a critical step before packing, and even the minimum amount of moisture inside the bag can lead to mold and a bad smell that is very difficult to remove. If you can't dry the boat completely, try to do so as soon as you can when you get home, and it's best to store it in a straightened or semi-folded form at room temperature.
☑️ Seasonal boat maintenance
⚠️ Warning: Never use solvents, acetone or chlorine-containing agents to clean PVC; they break down the polymer structure of the tissue, making it brittle and sticky; use only soap solution or special PVC cleaners.
Regular inspection valve And the water is not going to get in trouble, and if you notice an etching valve, it's often enough to just clear it from a grain of sand or tighten it, and the small punctures are easily repaired with the remix that comes with the delivery, and it's important to always have spare patches and glue on you, even if the boat looks whole.
Assembly, transport and storage
One of the main advantages of inflatable boats is their transportability. Riviera 3200 When assembled, it can easily fit in the trunk of most passenger cars, but the assembly and disassembly process requires some skill, especially in the field, and to minimize preparation time, it is recommended to develop a clear algorithm for actions.
When transporting in the trunk of a car, make sure that sharp objects, tools or chemicals (such as fuel canisters) do not get on the boat. The sharp smells of gasoline can absorb into PVC. It is best to use a separate bag or case that will protect the material from dust and mechanical damage during transportation.
Proper storage in the off-season (in a warm, dry place, in a straightened form) increases the life of the Riviera 3200 boat by 30-40% compared to storage in a compressed garage.
In winter, the boat should be kept at a temperature of at least -15 ° C, although room temperature is considered optimal. Before the final packaging for the winter, make sure that the boat is completely dry. Folded wet fabric can lose its strength specifications after several months of winter storage.
Frequently Asked Questions (FAQ)
Can you use the Riviera boat 3200 in winter for fishing?
Using PVC boats in winter is possible, but requires extreme caution: at temperatures below -10°C, the material becomes stiff and brittle. Any impact on the ice or careless movement can lead to cracks. If you plan to go fishing in winter, be sure to use special frost-resistant modifications (if available) or be prepared for an increased risk of damage to the hull.
What pressure should be pumped into the cylinders and bottom?
For main cylinders (boards), the recommended pressure is 0.2 atmosphere (checked by pressing a finger - there should be a small dent). High pressure inflatable floor (HIFLO/AirDeck) requires pressure from 0.6 to 1.0 atmosphere (be sure to use the pressure gauge included in the pump kit).
How long does a PVC boat last for active operation?
The average lifespan of a quality PVC reinforced boat, when properly maintained, is 7-10 years. The key factors reducing the life of the product are ultraviolet light, improper storage (humidity, frost), and mechanical damage. Regular treatment with protective compounds prolongs the life of the material.
Can I seal the boat on my own in the field conditions?
Yes, for emergency repairs, a self-adhesive patch is included, which will allow you to get to the shore or base, but full repairs using two-component glue (for example, polyurethane) and warming are recommended only in dry and warm conditions to ensure tightness.