Finding the best solution for on-board accommodation often leads fishermen and tourists to think about the need for additional comfort. The standard inflatable jar, which comes with most budget models of floating vehicles, rarely provides proper ergonomics, especially during long transitions or long waits for cool. PVC-seat It is becoming a popular alternative that allows you to significantly reduce the weight of equipment and increase ease of use.
Unlike rigid plywood or aluminum structures, soft interiors have a unique ability to adapt to human anatomy, which reduces stress on the spine and reduces fatigue, which is critical to maintaining concentration while fishing. However, the choice of such products requires careful attention, as the market offers many options, differing in design, materials and method of attachment.
Advantages of soft designs over rigid analoguesThe main argument in favor of choosing soft interior elements is their weight and compactness. Inflatable seat When deflated, it takes up a minimum of space in a harunduk or tackle bag, which allows you to take more payload with you. For owners of small craft, where every kilogram and cubic centimeter of volume is on the bill, this becomes a decisive factor when completing equipment.
In addition, the soft surface eliminates the risk of accidental damage to the interior of the boat. The hard corners of plywood benches can wipe or even damage cylinders when actively pitching or sloppy handling. PVC fabric high density ensures that even with intensive operation, the integrity of the bottom and sides will remain unchanged, and the interior element itself will last for many years.
⚠️ Warning: Despite the high wear resistance of modern materials, avoid contact of inflatable elements with sharp objects, fishing hooks or tools without protective covers.
Materials and production technologiesModern products are made of the same materials as the boats themselves, which ensures their durability and resistance to external influences. polyvinyl chloride (PVC), which is not afraid of moisture, ultraviolet light and temperature changes, the quality of the seams and the density of the fabric directly affect the life of the product, so you should not save on this parameter.
Hot welding technology
Unlike cold gluing, hot welding creates a monolithic bonding of materials, eliminating pressure bundling, which is especially important for elements that experience constant dynamic load, such as seats with an inflatable backrest or sides.
The internal structure can also vary. Some models are simple cushions, while more complex designs have internal partitions or a mesh structure that ensures the stability of the shape. The optimal density of fabric for such products is considered to be from 750 to 1100 g / sq. m.This ensures resistance to abrasion and mechanical damage.
Types of structures: from simple pillows to chairs with backrestThe market offers a wide range of solutions that every user can find, and simple inflatable airbags are a budget solution that just sit on any flat surface, whether it's a transom can or a boat bottom, and they're easy to transport, but they don't provide back support.
A more advanced option is the design with back These products often have a system attached to the transom jars or sides, which makes them a full-fledged chair, and this is especially true for fishermen who spend a lot of time on the water and need a reliable backrest.
Comparative analysis of popular modelsFor ease of choice, it is worth considering the main specifications of the different types of seats in comparison. Below is a table showing the differences between the basic and advanced models.
| Type of design | Weight (kg) | Comfort. | Complexity of installation |
|---|---|---|---|
| Inflatable cushion | 0.3 - 0.5 | Low. | Minimum |
| Back seat | 0.8 - 1.2 | Medium. | Medium |
| The transom chair | 1.5 - 2.5 | Highly | High. |
| Modular system | 2.0 - 3.0 | maximum | Requires skills |
Instructions for installation and fasteningThe correct fixation of the interior element is the key to safety on the water. Untrained users can make the mistake of relying only on the friction of surfaces. Le-LinkIf they are designed by the boat.
☑️ Checking of the attachment reliability
The installation process usually starts with surface preparation, it has to be clean and dry, if you use a model with belts, they have to be run through special hinges on the bank or boards, and it is important to distribute the load evenly to avoid skewing.
⚠️ Attention: It is strictly forbidden to attach inflatable elements to air supply valves or other functional units of the boat, not designed for locking cargo, this may lead to depressurization of cylinders.
Use soft cloth pads under the belts if they pass through areas with a high probability of friction, which will prolong life as a belt, and protect the boat's coating from istyres.
Care, storage and repairAnd cockpit After each fishing, the product should be washed with fresh water, especially if you have been swimming in salty waters, salt, drying, cree crystallizes and can damage the structure of tissue or seams.
It is better to store products in a straightened or slightly deflated state, in a dry room protected from direct sunlight. Prolonged exposure to ultraviolet light can lead to material degradation and loss of elasticity. Regularly check the integrity of the valves and the absence of micropunctures.
Regular washing and proper storage in the shade are the main factors that increase the service life of inflatable equipment by 2-3 times.
Safety and Weight Distribution Inflatable seatIt's buoyant, especially when it's filled with air, but in a crowded boat, every kilogram counts. Spread the weight of passengers and cargo evenly across the sides.
Using structures that are too tall or too wide can limit the view or interfere with the control of oars and motor. Make sure that the chosen model does not interfere with the operation of the transom plate or access to the anchor box. Safety should always be a priority over comfort.
Impact on sustainability
High backs and armrests increase sailing and can shift the center of gravity upwards, and in windy weather or excitement, this requires increased caution when moving inside the boat.
Frequently Asked Questions (FAQ)
Can the inflatable seat be used as a life-saving aid?
No, absolutely not. Although the product is filled with air and can be held on water, it is not certified as a life-saving device and will not withstand the weight of a person in an emergency without the risk of rupture.
How fast can you inflate a seat without a pump?
Most models have valves that allow you to quickly fill them with air with your mouth in 1-2 minutes. Using a foot or electric pump will speed up the process, but requires caution not to exceed the working pressure.
Will a universal seat fit my boat?
Universal models are suitable for most standard cans with a width of 30-35 cm However, for boats with non-standard geometry or inflatable bottoms (NDND), it is better to choose specialized solutions with fastening systems.
How to clean the contamination from the surface of PVC?
Use warm soapy water and a soft sponge to clean, and aggressive chemical solvents, gasoline or abrasives can damage the protective layer of tissue and cause it to break down.