Any experienced water-engineer knows that standard inflatable vessel equipment is rarely ideal for long walks on the water. Often the base cans are simply plywood sheets rigidly fixed into slots, which creates discomfort and leaves no room for small gear. jar-liner It becomes one of the most popular elements of tuning, radically changing the ergonomics of the cockpit.
Modern solutions are often integrated into the design of soft or rigid pocket-bagA well-chosen accessory that allows you to keep a sonar, navigator, documents or personal belongings on hand without scattering them on the bottom of the boat, not only adds convenience, but also protects the sides from rubbing, and also serves as an additional buffer for accidental impacts.
In this article, we will discuss in detail what materials are made of high-quality linings, how to choose the right model for your type of vessel and whether to make such an element yourself. You will learn about the nuances of fastening, the effect of fittings on the durability of the product and how to turn a regular seat into a multifunctional organizer.
Functional purpose and benefits of use
The main task of the lining is to create a comfortable space for sitting and storing. A rigid plywood jar without coating slides, colds in the off-season and gets wet quickly. liner With an integrated bag, these problems are solved by providing a soft surface and a sealed or waterproof space for things.
The bag allows you to unload the cockpit from the excess clutter. Instead of looking for a flashlight or passages deep in the tank, you have direct access to them. In addition, such structures often have additional belts or carbines for attaching gear, which is critical when actively fishing or hunting.
⚠️ Warning: When choosing a bag lining, make sure the pocket material has a water-repellent impregnation. Regular fabric will quickly gain water, increasing the weight of the boat and creating a risk of wetting the contents in choppy conditions.
An important aspect is the protection of the cylinders themselves, and the linings often have soft sides or reinforced edges that take over the friction of clothing and equipment. PVC material boats, preventing the appearance of scuffs and microcracks in places of contact with banks.
Manufacturing materials: from Oxford to reinforced PVC
The longevity of the accessory depends on the quality of the raw materials. Oxford (Oxford) with different density weaving, most often 600D or 900D. It has excellent resistance to mechanical damage, does not fade under ultraviolet light and is easy to clean from dirt and fish mucus.
For the more budgetary options, you'll use regular polyester or tarpaulin, but these materials lose color more quickly and can rot when they come into contact with water if they don't have a special coating. reinforced PVCThis ensures full water resistance and maximum strength of the seams.
The inside of the lining, which is in contact with the balloon and the jar, is often equipped with an anti-slip coating, which can be rubberized mesh or special points, and this measure prevents the can from slipping in the slots during movement, which is especially important in planing.
To test the quality of the fabric, Oxford pull the weaving threads lightly at the site of the seam - they should not diverge or tear. Also, quality fabric makes a characteristic deaf sound when crushed, rather than the ringing rustle of cheap polyethylene.
Design features and types of fastenings
There are several types of designs on the market, each with its own installation features. coverIt's a slap over a regular can and it's fixed with fastex or Velcro belts, and it's a versatile type that's suitable for most boat models.
There are also models with a rigid frame inside the bag that completely replace the regular plywood, which provide perfect seat geometry, but require precise size matching, often through regular slots or with additional slings covering cylinders.
Plastic fastexes should be frost resistant, and zippers on bags should have moisture valves or be made in the format AquaguardCheap sea air fittings rust in one season, making the accessory useless.
☑️ Selection criteria for anchorages
Comparative table of specifications of linings
To make it easier to decide on the choice, consider comparing the main types of linings on the market, these parameters will help you understand which option will be optimal for your style of operation of the vessel.
| Parameter | Fill case (Soft) | Hard pad with bag | Universal case |
|---|---|---|---|
| Basic material | Oxford 600D | Plywood + PVC | polyester |
| Weight. | Low (0.3-0.5 kg) | Medium (1.0-1.5 kg) | Low (0.2 kg) |
| Bag volume | Medium (up to 10 l) | Minimum | Large (up to 15 l) |
| Water protection | Waterproofing | Complete leakproofness | Missing. |
| Price. | Medium | High. | Low. |
As you can see from the table, the choice depends on priorities: if you want maximum protection of things, take a hard version or a sealer. If lightness and simplicity are important, choose a soft case from Oxford.
Installation and operation instructions
Installation of a quality lining usually does not require special tools, but following the sequence of actions will prolong the life of the product. First, you need to degrease the surface of the regular jar if there is dirt or traces of glue on it, this will ensure the best fit of the anti-slip layer.
Then we put the case on the jar, straightening all the folds, and pay special attention to the corners, they should sit tight, without tension, which could deform the seams when you load, if the model involves straps, pass them through the regular slots of the boat or fix them on the cylinders.
Order of tightening of belts:1. Relax all the fastexes.
2. Strengthen the central belt.
3. Strengthen the side belts consistently.
4. check the stability of the bank (should not stagger).
Operation requires regular maintenance. After each release, especially in salt water or muddy conditions, the lining must be removed, dried and wiped with a wet cloth, it is better to store the product in a straightened form or rolled up, but not in a compressed state for a long time.
Secrets of the Long Service of Lightning
To prevent zippers from getting stuck on your bags, treat them regularly with silicone lubricant. Do not fasten the zipper if it hits cloth or sand - this will cause the runner to break.
Self-made: is sheepskin worth making?
Many craftsmen are trying to sew liner It's possible, in theory, to do it yourself, using old awnings or buying fabric at retail, and it's not difficult for people with sewing skills, but there are nuances that are often overlooked in handicraft manufacturing.
Industrial products are sewn in specialized machines with reinforced needle and thread, often with gluing of seams. At home, it is extremely difficult to achieve the same tightness and strength. In addition, the cost of quality Oxford fabric and accessories at retail can approach the price of the finished product.
Independently makes sense only if your boat has non-standard size cans or a unique configuration of the cockpit, for which there are no ready-made solutions.
⚠️ Note: When sewing yourself, do not use ordinary threads (cotton or lausan), they will rot or RUB quickly, you need a reinforced thread (for example, 45LL or 70LLL) and a step of at least 4-5 mm for strength.
Questions and Answers (FAQ)
Can I wash my bag in the washing machine?
Most manufacturers do not recommend machine washing, especially with pressed, as this can damage the water-repellent coating and deform soft inserts. It is better to manually clean the product with a soapy solution brush and dry thoroughly.
Will a universal overlay be suitable for any PVC boat?
Universal models are designed for a standard width of the can (usually 30-35 cm) and have adjustable belts. However, if you have a boat with a non-standard profile of cylinders or specific mounting of cans, it is better to look for a model sharpened to a specific brand (for example, Flagman, Cayman, Mev).
How to repair a broken bag on the lining?
For Oxford or PVC fabric repairs, there are special glue and patch remixes, the break site needs to be degreased, patched (rounded to keep corners from being picked up) and tightly pressed. For seams, you can use shoe glue or PVC glue.
Does the bag affect the boat’s loading capacity?
The weight of the lining itself is minimal (up to 1 kg) and has little effect on the overall load capacity. However, when filling bags with heavy things (tools, batteries), remember to distribute the weight. Do not overload one side, so as not to disturb the differentiation of the vessel.
The overlay on the can with a bag is not just an accessory for comfort, but an important element of the organization of space, which saves your time and nerves on fishing, keeping the equipment dry and affordable.