Outboard motors for popular boats barkass In 2026, there were significant changes: manufacturers introduced models with improved fuel efficiency, reduced noise levels and integrated diagnostic systems. PVC or aluminum-model boats This brand now requires taking into account not only power, but also compatibility with the design of the transom, the weight of the equipment and even climatic conditions of operation.
In this review, we'll take a look at Unique engineering solutions of 2026which make the new engines more reliable for Russian water bodies Yamaha F25 automatic-lift Mercury 20 ELPT We'll focus on the nuances of the boats. Barcas 320 and Barcas 370And for those who are planning to buy, we'll give you the current prices and feedback from owners about the real fuel economy.
Top 5 new products of 2026: specifications and prices
Manufacturers of outboard motors this season have bet on Compactness and intelligent management systemsMarket leaders. Yamaha, Mercury, Honda and Tohatsu - presented models that are ideal for boats barkass Thanks to optimized weight and improved ergonomics, here is a comparative table of key innovations:
| Model | Power (hp) | Weight (kg) | Type of launch | Features | Price (from), RUB |
|---|---|---|---|---|---|
| Yamaha F25SMHB | 25 | 52 | Electrical starter + manual | System system PrimeStart, automatic lifting |
289 000 |
| Mercury 20 ELPT | 20 | 45 | manually | Ultra-light body, low fuel consumption (2.1 l / h) | 215 000 |
| Honda BF20D3SHU | 20 | 47 | Electrical starter | Technology ECOmofour-stroke engine |
268 000 |
| Tohatsu MFS25C | 25 | 50 | Manual/electric | System system Lean Burn fuel-efficient |
240 000 |
| Suzuki DF20AS | 20 | 48 | Electrical starter | System system Easy Startlow vibration level |
255 000 |
Note: Models with electric starter (for example, Honda BF20D3SHU) require an additional battery, which increases the total cost of the package, but they are indispensable for cold regions, where manual start-up can be a problem. Mercury 20 ELPT The only one in the lineup with a weight of less than 46 kg, which is critical for boats. Barcas 320 with a load limit.
⚠️ Attention: When choosing a outboard motor Barcas 370 Check the maximum power specified in the boat's passport. Exceeding even 5 hp can lead to denial of GIMS registration and a fine of up to 2,000..
Which motors are better for boats: two-stroke or four-stroke?
This is one of the most controversial issues among boat owners. barkass. two-stroke motors (for example, Tohatsu MFS25C) are cheaper, easier and easier to maintain, but require mixing oil with gasoline and have higher fuel consumption. four-stroke how Honda BF20D3SHU) quieter, more economical and more environmentally friendly, but weigh 10-15% more and are more expensive.
For boats. barkass With a transom of up to 380 mm, the best choice will be:
- 🔹 two-stroke motors: if it's important ease (for example, for carrying the motor manually) and a budget of up to 200 000 RUB. Mercury 20 ELPT or Parsun F20BMS.
- 🔹 four-stroke motors: if priority silence and economical (e.g. for long-term fishing) Best options: Suzuki DF20AS or Yamaha F20SMHA.
- 🔹 Hybrid solutions: Some models (e.g., some models) Tohatsu MFS25C) combine the advantages of both types through the system
Lean BurnIt automatically regulates the fuel supply.
Important nuance: for boats barkass inflatable floor (e.g., Barcas 320 NDLD) two-stroke motors They can create excessive vibration, which leads to premature wear of the PVC material, in such cases it is recommended to install damping gaskets on the transom or choose four-stroke analogs.
New technologies in engines in 2026: what to look for
Manufacturers of outboard motors in 2026 focused on the intelligent control systems and eco-friendlinessHere are the key innovations to consider when choosing:
- 🔋 Automatic lifting systems: For example, Yamaha F25SMHB functioned
Shallow Water DriveIt's a system that allows you to lift your motor when you're going through shallow water without stopping your boat. - 🌿 Eco-mode: Technology
ECOmofrom Honda andLean Burnfrom Tohatsu Automatically optimize fuel consumption, reducing it by 15-20% compared to models in 2023. - 📱 Integration with smartphones: Motors. Mercury and Suzuki now support Bluetooth connectivity to diagnose and configure settings through applications (e.g.,
Mercury Marine App). - 🔇 Noise reduction systems: The new four-stroke motors use improved mufflers and vibration insulation mounts, making them 30% quieter than their predecessors.
The system deserves special attention. PrimeStart from YamahaIt's a system that makes it easier to start the engine in cold weather, and it automatically adjusts the fuel and air supply, so you don't have to pull the cord repeatedly, and it's critical for fishermen who go out into the water in early spring or late fall.
If you often fish in shallow water, choose motors with automatic lifting function (for example, the engine is not used for the purpose of fishing). Yamaha F25SMHBThis will prevent damage to the screw and reduce the risk of catching the snags.
How to install the motor on the boat Barkas: step-by-step instructions
Incorrect installation of the motor can lead to loss of controlIt's fuel consumption, it's even transomic damage. barkass with a transom height of 380 mm, the following sequence of actions is recommended:
- Compatibility check: Make sure the engine's lower unit length is the same as the height of the transom. Barcas 320/370 engine-size
short lower unit (S)orultrashort (XS). - Motor anchorage: Use standard brackets, but for aluminum boats barkass It is recommended to install an additional metal plate 3-4 mm thick to distribute the load.
- Adjustment of the angle of inclination: The optimum angle of inclination of the motor is 5-7 degrees up, which reduces water resistance and improves handling.
- Checking the centre: The motor must be mounted strictly in the center of the transom, even a displacement of 2-3 cm to the left or right will lead to a shift in the direction of the motor. divert sideways when moving.
For inflatable floor boats (Barcas 320 NDLD) must be used transom-plate or special fasteners with shock absorbers to avoid damage to the PVC material from vibration.
☑️ Preparation for the installation of the engine on Barkas
⚠️ Attention: When installing the motor on the boat Barcas 370 hard-bottomed Do not use bolts longer than 20 mm They can damage the internal structure of the body, the optimal length of the fastener: 16-18 mm.
Maintenance of new engines: what has changed in 2026
Modern outboard motors require less frequent maintenance, but some procedures have become more technological. Honda BF20D3SHU and Suzuki DF20AS now used synthetic oil with increased replacement interval - up to 100 hours (versus 50 hours in older models).
Major changes in services:
- 🛢️ Oil: For four-stroke engines, class oil is now recommended
SAE 10W-40markedFC-W(for example, Yamalube 4M or Mercury Premium). - ⚙️ Air filter: The new engines are used multilayer Replacement of the seasons once in 2 instead of each season.
- 🔧 Diagnosis: Motors with Bluetooth module (for example, Mercury 20 ELPT) allow errors to be read through a smartphone, making it easier to find faults.
- 🔥 Fuel system: In the models with
Lean BurnYou need to wash the nozzles once a year with a special cleaner (for example, Star Tron).
Important: for motors with electric starter (for example, Yamaha F25SMHBThe battery must be checked before each release, and a discharge below 12.2 V may cause system failures. PrimeStart.
What happens if you pour the wrong oil?
Using oil that is not specific (e.g., car oil instead of boat oil) results in the formation of soot on the pistons and a reduction in engine life by 30-40%, in the worst case, to jamming the engine at high revs.
Price comparison and where to buy: official dealers vs. market
Prices for new outboard motors barkass in 2026, increased by 8-12% compared to last year, but there were profitable offers from official dealers with installments and free maintenance.
| Model | Price at the dealer (RUB) | Price on the market (RUB) | Guarantee | Advantages of the dealer |
|---|---|---|---|---|
| Yamaha F25SMHB | 289 000 | 265 000 | 3 years | Free T. O., installment 0% |
| Mercury 20 ELPT | 215 000 | 198 000 | 2 years | 5% discount on trade-in |
| Honda BF20D3SHU | 268 000 | 245 000 | 4 years | Free delivery and installation |
Buying from an authorized dealer is more expensive, but you get warranty up to 4 years and the possibility of free service. In the secondary market (for example, in the Avito or jule) you can save 10-15%, but the risk of running into the engine with defective or the unissued guarantee remains high.
Advice: If you buy a motor for a boat barkass On credit, pay attention to the offers from Sberbank and VTB - some dealers provide preferential terms (rate from 7% per annum) when processing through them.
Buy engines only from official dealers if you plan to register with GIMS. The market often sells "gray" models without documents that will not be able to put on record.
Reviews of owners: real experience of operation
To see how new engines are suitable for boats barkassWe have analyzed the feedback of the owners on the forums (for example, FishHunting and BoatPlace) and in VKontakte groups, here are the key observations:
- ⭐ Yamaha F25SMHB: "Starts from half-turn even at -5°C. Fuel consumption is 2.3 l/h at cruising speed (25 km/h). Minus - expensive repairs in case of breakdown of electronics."Alexey, Moscow)
- ⭐ Mercury 20 ELPT: "Perfect for Barcas 320 It's light, quiet, but it's vibrating at full power.Igor, St. Petersburg)
- ⭐ Honda BF20D3SHU: "No breakages in season 3, the only thing is that you have to change the oil more often than the instructions say (every 80 hours instead of 100)."Dmitry, Novosibirsk)
General trend: boat owners Barcas 370 More often than not, four-stroke motors are chosen.Honda or Suzuki) because of their reliability on large bodies of water, and for compact bodies of water Barcas 320 Prefer light two-stroke models (see below).Mercury or Tohatsu).
Important: The reviews often mention the problem with corrosion When you're operating in salt water, like the Black Sea, the solution is to use stainless steel fasteners and wash the engine with fresh water after each exit.
FAQ: Frequent questions about outboard motors
Can I install a 30 hp motor on the Barkas 370?
No, if the boat's passport indicates a maximum power of 20-25 hp, exceeding this value will lead to a maximum power of the boat. denial of GIMS registration The exception is if you design the boat as a small-boat with an individual project, but this will require additional costs (from 15 000 ).).
Which motor is better to choose for fishing on the lake?
For standing water bodies, four-stroke engines with low noise level are optimal (for example, Suzuki DF20AS or Honda BF20D3SHUThey don't scare fish and are more economical at low speeds. If you care about speed (for example, for trolling), look for two-stroke models with a system. Lean Burn (Tohatsu MFS25C).
Do I need to register a 10 hp motor?
From 2023, engines with power 5 hp. For registration will be required: motor passport, purchase check, application and receipt of payment of the state duty (800 RUB). Without registration, a fine of up to 2 000 RUB.
How often should a new engine be serviced?
For four-stroke motors (e.g., Honda BF20D3SHUThe first maintenance is done after 20 hours, then every 100 hours or once a season.Mercury 20 ELPT) Every 50 hours, be sure to check the oil level before each exit and flush the cooling system after use in salt water.
Can I use car oil for a outboard motor?
Automotive oil has no additives to protect against corrosion in an aqueous environment and does not meet the standard. FC-WIt'll lead to engine-wear Use only specialized oils, for example, Yamalube 4M or Mercury Premium.