Any fishing or cruising on a pond is torture if you don't have a normal support to sit in a boat, and sitting on a hard tank or aluminum bottom for long periods of time can have a negative impact on your back health and reduces pleasure.
The modern market offers many solutions, from simple jars to complex rotary systems, and the choice of the right option depends on the type of boat, operating conditions and personal preferences of the owner.
In this article, we will discuss in detail what types of supports exist, how to install them correctly and what to pay attention to when buying to ensure maximum comfort during swimming.
Why you need a professional seat support
Many owners of inflatable and metal boats have been using regular "banks" for years, simple boards thrown over the sides. ergonomics It's not a good thing, because the absence of a backrest and the wrong angle of inclination lead to rapid fatigue, especially when waiting for hours for a cool thing or a long transition.
Professional support solves several tasks at once, one, it unloads the spine, allowing you to take a natural position. fittings It provides a reliable fixation, eliminating the risk of rolling over, and thirdly, modern systems allow you to adjust the height and angle of inclination, which is not possible in the case of a conventional board.
⚠️ Attention: The use of homemade supports without reliable mounting can cause a fall overboard during a sharp maneuver of the boat.
Also, having a fixed or removable seat frees up space in the cockpit. You can move quickly without carrying a heavy board behind you, which is especially important in the cockpit. PVC-boat.
Main types of supports and anchorages
When choosing a system, you need to consider the design of your boat, and supports are divided into several categories depending on the method of fixation and material.
The most common option is bracketThese can be inflatable (composed with many boats) or rigid. Hard models often require the insertion of pentacles or the use of special attachments covering the balloon.
For metal boats and boats are popular stationaryWeldable or boltable, and there are also universal solutions that use standard liner racks or timbers.
- 🪑 Inflatable supports: light, take up little space, but are less stable in the wind.
- 🔩 Metal brackets: provide rigid fixation, withstand a lot of weight, but require installation.
- 🔄 The turning mechanisms: Allows you to rotate the seat 360 degrees, convenient for motor control and fishing.
- 📏 Telescopic racks: They allow you to adjust the height of the landing, which is important for people of different heights.
When choosing between these options, weigh the need for mobility and the willingness to modify the boat. If you rearrange seats frequently, rigid glued-in nickels can limit functionality.
Manufacture materials: strength against weight
The durability of the support depends on the materials from which it is made, and in aquatic environments, corrosive factors such as salt water, ultraviolet light and temperature changes play a crucial role.
The most common material is stainless steel These alloys are virtually corrosive and can withstand heavy loads, but steel is a solid weight, which is critical for lightweight inflatable boats where every kilogram counts.
Aluminum alloys, such as duraluminiumWithout a protective coating, aluminum oxidizes rapidly, especially in salt water, losing strength and presentable appearance.
⚠️ Caution: Cheap zinc-coated steel will quickly rust in the first season of active use on the water.
Plastic elements, often used as reciprocating parts of fasteners or decorative linings, must be made of marine plastic, which is resistant to UV radiation and does not become brittle in the cold.
When buying, pay attention to welded seams of metal structures. They must be cleaned and processed so as not to damage the PVC fabric or fishing clothes.
Table of comparison of specifications of supports
To simplify the choice, consider the comparative specifications of different types of supports depending on their design and purpose.
| Type of support | Materials | Weight (approximate) | Difficulty of installation | Reliability |
|---|---|---|---|---|
| Inflatable jar | PVC | 0.3 kg | Missing. | Low. |
| Aluminum bracket | aluminum | 1.2 kg | Medium | Medium |
| Stainless rack | Nerzh. | 2.5 kg | High. | High. |
| The turning chair. | Steel + Plastic | 4.0 kg | High. | High. |
As you can see from the table, comfort and reliability often require a sacrifice of weight. For small boats up to 3 meters long, heavy constructions can be redundant and even dangerous, breaking the water. centre-up boats.
For large boats and boats, weight plays a smaller role, so it is more advisable to use massive, but most convenient systems with a rotary mechanism.
Instructions for installing support yourself
Installation of a rigid support requires accuracy and adherence to technology, and an error in installation can lead to damage to the cylinder or detachment of the attachment under load.
The first step is always to mark up, and you need to determine the optimal distance between the mounting points so that the seat is at a comfortable height and does not interfere with the control.
☑️ Preparation for installation
If you're putting PVC boats on the back, you're probably going to need a Pyatka paste, and you're going to use a special PVC glue, for example. Texacol or WigamThe surface of the cylinder and the pencil shall be cleaned and degreased.
The algorithm for the nickel gluing:1. Apply the first layer of glue on both surfaces.
2. wait 10-15 minutes until drying.
3. Apply the second layer and tightly press the pent.
4. roll roll roller to remove air.
5. Dry 24 hours before loading.
Once the glue is dry, you can start fixing the metal bracket, which is usually screwed through the holes in the pen, and it's important to use stainless fasteners and grover washers so that the screws don't unscrew from vibration.
Nuances of work with aluminum boats
When installing on aluminum, be sure to use rubber pads between the metal rack and the side to avoid electrochemical corrosion and scratches.
⚠️ Warning: Do not overheat the PVC fabric with a hairdryer when glued in hot weather - this can lead to deformation of the balloon.
Seat maintenance and maintenance
Even the best quality. boat-hold Sea salt, sand and dirt can quickly disable mobile machinery.
After each foray into the salt water, the metal parts must be thoroughly washed with fresh water. Pay special attention to threaded joints and hinges of the rotating mechanisms.
Once a season, it is recommended to lubricate the moving parts with silicone lubricant or lithium compounds intended for marine equipment, this will preserve the smoothness of the ride and protect against jamming.
- 🧼 Wash your seat regularly with a soft soap solution.
- 🔧 Check the bolt tightening before each season.
- ☀️ For the winter, keep removable seats in a dry room, away from direct sunlight.
- 🛡️ Treat metal elements with anti-corrosion sprays.
Timely care will prolong the life of the equipment and ensure that your support will not fail at the most inopportune moment.
Regular lubrication of hinges and washing with fresh water is the key to the long service of any metal fittings on the boat.
Frequently Asked Questions (FAQ)
Can I install a swivel seat on a small PVC boat?
Technically possible, but not always feasible: Turning mechanisms are heavy and high, which can shift the center of gravity and make the boat less stable. For boats less than 3.2 meters long, it is better to use simple removable brackets.
Which glue is better to use for sticking fives?
The best-proven two-component polyurethane adhesives or special adhesives for PVC based on tetrahydrofuran, it is important that the adhesive is elastic after drying to compensate for the deformation of the balloon.
Will a plastic seat hold a 120kg person?
Depending on the design. Specialized reinforced plastic sea seats are designed to carry loads of up to 150 kg or more. Cheap garden options can crack. Always look at maximum load markings.
How to remove the creak of metal on the metal in the fasteners?
Screeching usually occurs because of friction of parts or sand. Disassemble the connection, clean the dirt, apply graphite or silicone grease. Teflon washers installed between rubbing surfaces also help.
Do I need to remove the seats when transporting the boat in assembled form?
Removed seats take up less space and do not create pressure points on cylinders when blown or packed, and this eliminates the risk of damage to the tissue on the sharp angles of the attachments.