Organizer in the PVC boat on lyctros: selection and installation

Inevitably, the operation of an inflatable boat confronts the owner with the problem of storing small things directly on the water. Spinnings, sonars, bait boxes, pumps and anchors occupy valuable space, preventing movement and creating discomfort during long runs. PVC organizerIt's a clump that turns this chaotic pile of things into an orderly system, and it's not just a shelf, it's a functional element that attaches to the inflatable board, freeing up the cockpit for the legs and gear.

Modern solutions allow you to adapt the space to suit any needs, whether it is trolling, spinning or just a family holiday by the water. A well-chosen accessory not only improves ergonomics, but also improves safety, since heavy objects are fixed in special cells and do not roll down the bottom during a sharp maneuver. In this article, we will discuss in detail why lyctross is considered the de facto standard for inflatable boats and how to make sure you do not make the wrong choice.

Many anglers underestimate the importance of proper organization of space until they encounter a situation when a sharp jerk of a large fish, a box with baits falls overboard or gets tangled in the legs. Licroses It was originally designed to protect the boat from grinding on the pier, but it turned out to be the perfect base for attachments, making it a versatile tuning platform.

Advantages of fastening to lyctros over alternatives

The main advantage of using lyctros And the key to installing the builders is that they're safe and secure for the boat itself, and unlike suction cups that can unstuck in the heat, or belts that pull the cylinders over and deform them, the lyctros provides a rigid and stable fulcrum, and the boat's design is not broken because it doesn't require drilling or attaching extra elements.

Importantly, standard PVC boats already have a welded cable along the side, which is the basis for the anchorage. Organizers designed for this system have special hooks or clips that cling to this cable, bending the side, which allows the load to be distributed evenly throughout the length of the side, rather than at one point.

⚠️ Attention: When installing heavy organisers, make sure that the lyctros is welded well along the entire length. If the cable moves away from the cylinder in some places, the use of hinged shelves in these areas is prohibited to avoid rupture of the seam.

There are several types of mounts that use this system:

• 🔗 Hook clips: The most common, just put on the cable from above.
• 🔩 Screw-mounted lockers: They provide a more rigid coupling, but require accuracy during installation.
• 🧶 Combined systems: combine hook for lyctross and belts for additional insurance.

And these systems allow you to quickly dismantle the organizer when the boat is blown away for transportation, so you don't have to peel anything off or disassemble complex structures, you just take the shelf off the board, and the boat is ready to pack in a backpack bag again.

Manufacture materials: plastic, metal or fabric

The choice of material directly affects the longevity of the accessory and its behavior in an aggressive aquatic environment. The market offers three main options, each with its own strengths and weaknesses. Understanding the physical and chemical properties of materials will help you make the right choice.

The most popular material is frost-resistant It's lightweight, water-absorbent, easy to wash. Plastic organizers often have a modular structure to combine compartments. However, cheap plastic can become brittle in extreme frost or burn out in the scorching sun in one season.

Metal structures, usually made of stainless steel or powder-painted aluminum, are less common, are highly durable and can withstand considerable weight, but the metal is susceptible to corrosion if the protective coating is damaged, and is significantly heavier than plastic, which is critical for small boats with limited payload capacity.

Materials	Weight.	Resistance to UV	Term of service	Price.
Plastic (ABS)	Low.	Medium	3-5 years	Medium
Stainless steel	Highly	High.	10+ years	High.
Oxford (tissue)	Low.	High.	2-4 years	Low.
aluminum	Medium.	High.	5-7 years	Medium

Fabric organizers made of material Oxford PVC coatings are a budget-friendly and lightweight option, they don't scratch the side of the boat, they fold easily and they take up minimal storage space, but they are less likely to hold their shape under load and lose their water-repellent properties over time.

Design features and types of organizers

The functionality of the organizer depends on its internal architecture, and a simple shelf can be useless if things roll off it as the boat moves along the wave, so manufacturers have different systems for fixing the cargo.

Classical. shelf-organizer It's a platform with high sides, a versatile solution for mounting tackle boxes or sonar, and more sophisticated models have built-in rod cups that free the fisherman's hands when crossing or fighting a trophy.

⚠️ Note: When choosing a rod holder organizer, check the diameter of the holes. Standard spinning handles may not fit if the holes are too narrow, or the rod will hang if too wide.

There are also specialized models:

• 🎣 Fishing tables: have folding wings and fasteners for yawners and extractors.
• 🔋 BACKS boxes: sealed compartments with ventilation for safe storage of the sonar battery.
• ⚓ Combined platforms: combine a shelf for the legs, a place under the box and holders for tackles.

The Secrets of Ergonomics

Arrange the organizer so that access to the main gear is possible without getting up. The ideal height of the organizer's side is just below the knee level in the sitting position, so as not to touch it when rowing or working with the engine.

Some advanced models are equipped with drainage-hole with valves, which allows water that gets inside (for example, from wet fish or rain) to flow back into the boat without forming a puddle on the shelf.

Proper installation and installation on board

Installation of the organizer is a simple process, but requires attention to detail. Incorrect installation can cause the shelf to constantly slide or, worse, damage the side of the boat. Before starting work, make sure that the boat is fully pumped, since the deflated cylinders are less spacing between the lyctross and the bottom, and the hooks may not fall into place.

The installation process usually looks like this:

1. Clear the installation area of sand and dirt.
2. Try on the organizer without load to find the optimal position.
3. Snatch hooks by the lyctross, starting with the bow or aft.
4. Check the density of the fit and the absence of distortions.

It's important to evenly distribute the weight on the organizer, and if you put a heavy box on one side and there's nothing on the other, the structure can tilt and turn the hooks out of the lyctross. Centre of gravity shall be as close as possible to the longitudinal axis of the boat.

If your organizer has extra seat belts, be sure to use them, which prevent the shelf from moving vertically when passing a high wave, when the boat's nose drops sharply and rises.

Protection from ultraviolet light and accessory care

Aggressive solar radiation is the main enemy of any materials on the water: Plastic fades and becomes brittle, fabric burns out, and metal elements can heat up to temperatures dangerous to a PVC cylinder on contact. Regular care will extend the life of your organizer for several seasons.

After each fishing, it is recommended to wash the organizer with fresh water, especially if you have been fishing at sea or in salt water bodies. The salt cries at the joints and can accelerate the corrosion of metal elements or destroy plastic compounds.

To protect against UV rays, you can use special spray polyroles for plastic, which create a thin film that reflects some of the radiation, and it's better to store the organizer indoors in the winter, in disassembled form, to avoid accidental damage and deformation under the weight of other things.

⚠️ Warning: Never leave a plastic-cell organizer in direct sunlight on an empty boat. The temperature inside an enclosed space (if the boat is covered with a tent) or in the open sun can cause the plastic to melt and stick to the cylinder.

FAQ: Frequently asked questions

Can I install an organizer on a boat without lyctross?

Theoretically, you can use belt mounts that encircle the side or suction cups, but the reliability of such mounts is much lower, especially at high speeds or at high wavelengths, and Liktros is the most reliable standard element for attachment equipment.

Will a plastic organizer hold the weight of an adult?

Most quality plastic organisers are designed to carry a static load of up to 50-80kg, but they are not designed to be used as a seat. Dynamic load (when you sit down) can break the structure or rip hooks from the lyctross. Use them only for storing things.

How to remove the organizer if the hook is stuck on the lyctross?

Do not use force, you can snatch the welding of the lyctross. Try to blow the boat a little (literally 10-15%) to change the geometry of the board, or use a soap solution to lubricate the contact zone of the hook and the rope.

Will a universal organizer be suitable for boats of different brands?

Yes, most lyctros organizers are universal, as the diameter of the lyctros and the distance from it to the bottom are standardized by most manufacturers (Flagman, Miv, Hunter, Aqua, etc.). However, before buying it, it is worth measuring the distance from the bottom to the center of the lyctros.