Choosing a boat for fishing or resting on the water is always a search for a balance between cost, quality of materials and functionality. LegionPotential buyers are concerned about how justified their popularity is and what the real reviews of Legion boats are hidden behind marketing slogans. The inflatable boat market is saturated with offers, and it is easy for a beginner to get confused about the technical specifications.
In this article, we will take a closer look at the experience of operating different modifications, from budget rowing models to serious motor options with BNDT. The analysis is based on forums, video reports and personal experience of users faced with real-world operating conditions.
It is important to understand that flyboat It's not just a piece of paddled fabric, it's a complex machine that needs to be properly maintained, and it can cost you not only money, but also safety on the water, so you have to weigh the pros and cons before you buy, based on facts, not just the assurances of the sellers.
General assessment of materials and assembly quality
The basis of any inflatable boat is the material from which it is made. In reviews of boats Legion often appears the term "reinforced PVC". The manufacturer claims a density of fabric at 750 or 950 g / m2, which is the standard for the average price segment. Polyvinyl chlorideThe stains used in production must be resistant to ultraviolet light, gasoline and mechanical damage.
However, analysis of real-world reviews reveals a mixed picture: users note that the material seems dense to the touch, but long-term use under the scorching sun can raise questions about its resistance. Stitches made by gluing method, in most cases, keep the load well, but quality control in the factory sometimes lame.
⚠️ Warning: When accepting a boat in the store, be sure to check the quality of the stitches gluing for unpatched areas or bubbles. Even a microscopic defect can lead to depressurization on the water.
Furniture, such as valves and handles, is often criticized. Cheap plastic elements can crack when impacted or in the cold. critically Carefully treat the valves and do not drag them, using only a special key that comes with the kit.
- 🛶 The PVC material with a density of 750-950 g/m2 provides basic protection against punctures.
- 🧵 Two-layer fabric in the area of the bottom increases wear resistance when pulling on the shore.
- 🔩 Intermediate quality fittings requiring careful handling and periodic inspection.
In general, the quality of the materials is in line with the stated price, and it's not a premium segment that uses Hypalon fabrics, but for amateur fishing and cruising, the resources are quite enough, the main thing is not to overload the vessel and monitor its condition after each exit.
Performance specifications and behaviour on the water
The behavior of the boat on the water depends on the design of the bottom and the geometry of the cylinders. NDMA The slate floors are much better at wave conditions than the slate floors, and the bottom stiffness allows you to stand on your feet and use the sonar more efficiently.
Many users have reported that the Legion is a good rate of stability, meaning that it doesn't blow as much by wind or current as it does with cheap boats, but that high-boat sailing still requires rowing skills or motors in side winds.
The speed of the engine depends on the length of the hull. Models up to 3 meters long have difficulty planing with one person and full gear, which affects the weight of the boat itself and the lack of pronounced redane on some versions.
⚠️ Note: Do not exceed the recommended engine power specified in the data sheet. Exceeding the power of the transom can lead to its detachment and the boat tips over.
To enter the planing with two adult passengers and cargo, it is recommended to consider models with a length of 3.2 meters and an engine power of 5 hp Otherwise, you will be content with displacement mode, which significantly increases fuel consumption and travel time.
- 🌊 The design of the NDND provides excellent rigidity and comfort when standing fishing.
- ⚓ Good stability on the course reduces fatigue when rowing.
- 🚀 For glides with full load, a motor with a capacity of at least 5-6 hp is required.
It's also worth noting that it's noisy, because cloth cans quench the splash of water better than hard plastic or metal, which is important for anglers who are hunting cautious fish. flyboard It gives you a tangible advantage.
Comparative analysis of popular models
The product line includes many modifications, and it can be difficult to choose the right one, so to structure the information, we have compiled a comparative table of the main specifications of popular models, often featured in reviews.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Kit weight (kg) |
|---|---|---|---|---|
| Legion-280 | 280 | 125 | 260 | 19 |
| Legion-320 | 320 | 140 | 450 | 28 |
| Legion-350 NDLD | 350 | 145 | 550 | 36 |
| Legion-380 | 380 | 155 | 650 | 44 |
Model Legion-280 It's often chosen as a "two-and-a-child" or a solo fishing option in small bodies of water, compact in transportation, but cramped for full-time fishing with lots of gear, and it's a typical "cruising" boat.
The middle ground is considered to be a length of 320-350 cm These dimensions allow you to comfortably accommodate two fishermen, install a sonar and have a buoyancy reserve. It is these models that most often leave positive reviews about the Legion boats, noting their versatility.
Secret to Size Selection
The rule is simple: take a boat one size larger than you think you need, and an extra 30-40 cm of length will give you a huge increase in comfort and safety, and the weight will increase slightly.
Models of the 380 series and above are already classified as serious boats for large reservoirs and sea trips in calm weather. Their weight can be a problem when carried alone, so the presence of a wheeled transom or assistant is almost necessary here.
Typical problems and complaints of users
Despite the availability, the technology is not without its drawbacks, and by studying the forums, you can highlight a number of common problems that owners face, and understanding these nuances will help avoid disappointment and extend the life of the product.
One of the common complaints is the quality of the adhesive used in the assembly, and over time, especially at temperature extremes, the seams can float or start to diverge, requiring periodic inspection and possibly additional gluing of the vulnerable areas with special formulations.
⚠️ Warning: If you notice a seam dissection, don't try to glue it with regular superglue. Use only specialized PVC adhesives, or you'll ruin the material.
And users complain about the package, because in cheap models, the oars can be flimsy, and the carry bag is made of thin fabric that can be wiped quickly, and you often have to buy quality accessories separately.
- 🔍 The risk of poor-quality gluing of seams on budget batches.
- 🎒 Weak wear resistance of transport bags and belts.
- 🪣 Inconsistency of the actual carrying capacity declared in the passport (safety margin is less).
Another thing is the smell: New boats often have a sharp chemical smell that weathers for weeks, and for people with allergies, this can be a serious discomfort if they are in a confined space or garage for long periods.
To get rid of the smell of a new boat faster, leave it in a well-ventilated and slightly pumped state in a well-ventilated room (but not in direct sunlight!) for a few days.
Recommendations for maintenance and storage
The durability of any equipment depends on care, storage and transportation are critical for PVC boats, and most of the problems described in negative reviews will be avoided properly.
After each fishing, the boat should be washed with fresh water, especially if you have been swimming in salt water or in bodies of water with abundant vegetation, mud and salts destroy the structure of the material and accelerate the aging of glue.
Store the product in a dry, cool place, in straightened or slightly deflated form. Prolonged storage in a highly compressed state (in a tightly packed bag) leads to the formation of crevices, which can later turn into cracks.
☑️ Checklist of preparation for winter storage
Periodically, once a season, it is recommended to pump the cylinders to working pressure and leave for several hours to straighten the folds and "crease" the material.
Summary: Is it worth buying?
In conclusion, we can say that the boats Legion They're not perfect, they have some constructive trade-offs, but they offer an affordable entry ticket to the world of water tourism and fishing.
If your budget is tight and you are willing to put up with the need for more careful quality control when buying and taking care during operation, then these boats will be a good choice.
Legion boats are the best choice for beginner fishermen and summer residents looking for a balance between low price and acceptable quality, but requiring careful attention to the details of the assembly.
Ultimately, the solution must be based on your specific tasks. For rare trips to the calm lake, these boats are more than enough to function, and the main thing is not to expect miracles from them and remember that the stingy pays twice, but in this case, overpaying for the brand does not always guarantee a radically different result.
Frequently Asked Questions (FAQ)
What is the maximum weight of the Legion 320?
rated carrying capacity of the model 320 is about 450 kg. However, for comfortable and safe fishing with two adults and equipment, it is recommended not to exceed 300-350 kg, leaving a buoyancy reserve in case of water or a sharp wave.
Can I install a motor on a boat without a transom?
Technically, you can use frog transoms, but for Legion boats, this is not always reliable because of the shape of the cylinders. It is better to choose models with an integrated hard or inflatable transance, designed for the power of your motor.
How to properly seal a puncture at home?
You need to degrease the puncture site, clean it with fine sandpaper, apply PVC glue on both surfaces, dry it, apply the second layer and tightly press the patch, dry it under load for at least 12 hours.
How long is the DND material?
When properly operated and stored away from direct sunlight in a deflated state, the NDND material lasts 5-7 years or more. The main enemy is ultraviolet light and mechanical damage by sharp objects.