Choosing a boat for fishing or hunting is always a compromise between the desired comfort and budget. In recent years, the domestic inflatable boat market has been filled with a strong niche with low-pressure inflatable floor boats known as low-pressure inflatable boats. NDMAAmong the many brands, boats stand out. River BoatsThe solutions are positioned as reliable and affordable solutions for Russian water bodies.
Many aqueous motorists are looking for information about the real experience of operation, and not about the dry specifications from the manufacturer's website. River Boats NDNDM It's often controversial, with some praising them for their passability, others pointing to the nuances of the build, and it's important to understand that this is a specific class of technology that requires a special approach to use and maintenance.
In this article, we will analyze the design in detail, analyze the real opinions of the owners and find out whether you should buy such a boat, and we will not hide the disadvantages, but also the objective advantages will be considered in as much detail as possible.
Design and features of low pressure inflatable floor
The main distinguishing feature of the series NDMA So unlike the solder boats, where the bottom is made of aluminum or plywood sheets, it uses an inflatable section. weight down The whole structure is disassembled, which is critical for fishermen transporting a boat in the trunk of a passenger car.
However, the low pressure in the floor cylinders imposes its limitations. River Boats It's a little bit less rigid than hard-decked boats, and when you hit a wave, the bottom can be slightly bent, which creates a "slap" effect if you're not getting the speed right, but in shallow waters and overgrown areas, it's a king, because the risk of damage to the bottom of the snag or the rock is minimal.
⚠️ Attention: When pumping the bottom of the NDND, strictly monitor the gauge readings. Pumped in the heat bottom can deform the sides of the boat, and under-pumped - reduce driving performance and increase the risk of puncture.
The materials used in manufacturing are usually high-density reinforced PVC. River Boats The seams are often used with five-layer fabric, which provides good resistance to abrasion. The seams are usually made by welding with hot air, which guarantees tightness, but requires careful storage.
Driving qualities and behavior on the water
inflatable floor boats have their own specifics, and many users have noted in reviews that boats are not in the same way. River Boats NDNDM They're very good at moderate agitation, and because of the keeliness of the inflatable floor, the boat is less prowling than flat-topped pencil boats, which is especially valuable when trolling or when moving large reservoirs through open water.
However, there is a nuance with the plane: due to the softness of the bottom, part of the engine energy can be used to deform the floor. To go to the plane with a full load (two people plus equipment), often requires a motor with a margin of power. For models with a length of 3.2-3.6 meters, the optimal is a motor with a capacity of 9.9-15 hp.
- 🚤 Excellent permeability in shallow water and overgrown areas due to the soft bottom.
- 🌊 Good germination on the wave and stability on the course due to the keeled form.
- ⚖️ A noticeable decrease in the weight of the kit compared to the soldering boats of similar size.
- 💨 Sensitivity to side wind due to the sailing of inflatable tubes.
It's important to note that at high speeds, soft bottoms can create additional resistance. If your fishing style involves constant fast transitions over long distances, it's worth considering tougher options. River Boats They fully satisfy the needs of most users.
Assembly, disassembly and ease of use
One of the main arguments in favor of buying a boat River Boats NDNDM It's speed and ease of assembly. You don't have to mess around with heavy floorboards, you don't have to align them and you're afraid of pinching your fingers. It's all about putting cylinders, pumping and putting seats in, and a skilled user builds a boat in 10 to 15 minutes.
Transportation is also not a problem. The boat packed takes up a minimum of space. Often the entire kit, including the engine and accessories, can easily fit into the trunk of a sedan or even a large backpack. portability It is really high, allowing you to get to remote water bodies without a trailer.
☑️ Checking before getting on the water
But you have to consider that the inflatable floor requires more careful preparation of the descent site. Spikes, sharp stones or broken glass on the shore can be fatal for a soft construction. Unlike an aluminum boat that can be simply pulled from the shore, it requires precision. After each fishing, it is recommended to wipe the bottom with a damp cloth to remove the sand that acts as an abrasive.
Comparative table of models River Boats
The manufacturer’s lineup includes several popular modifications, varying in size and load capacity, and to make it easier for you to navigate, we have prepared a comparison of the key specifications of the most popular models with the bottom of the NDNDT.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | River motor (L. S.) |
|---|---|---|---|---|
| RB-320 NDLD | 320 | 155 | 450 | 5-9.9 |
| RB-360 NDLD | 360 | 165 | 600 | 9.9-15 |
| RB-390 NDLD | 390 | 175 | 750 | 15-20 |
| RB-420 NDDLD | 420 | 185 | 900 | 20-30 |
When choosing a model, consider not only the length, but also the width of the cockpit. RB-390 or RB-420They provide greater stability when standing, but they can be less rotary, narrower models are juniper, but they are harder to fit in comfortably together.
real owner reviews: pros and cons
Analyzing forums and communities of boaters, we can highlight stable patterns in reviews about boats. River Boats. Users often praise the brand for its value for money; for the budget segment, the quality of seams and accessories is highly valued; many people say that the boat serves faithfully for several seasons with proper care.
Among the negative aspects, the smell of rubber in the first seasons of operation and the need for frequent pumping of cylinders at temperature changes are most often mentioned, and some fishermen complain about the inconvenience of installing the sonar on a soft bottom - special mounts or adapters are required.
⚠️ Warning: Do not keep the assembled boat under direct sunlight. Ultraviolet destroys the structure of PVC, and heating the air inside the cylinders can cause them to rupture or deform seams.
The Secret of Long-Term Service of the NDND
To extend the life of the inflatable floor, use special PVC protective sprays and try not to drag the boat along dry ground. Even once spent on asphalt, can significantly thin the protective layer.
But most people agree that fishing in medium rivers, lakes and reservoirs is a great choice, especially if the priority is ease of transportation. A critical factor in the longevity of a NDND boat is storage: be sure to dry the bottom before packaging, even if it seems dry.
Boat care and typical malfunctions
Like any other equipment, boats. River Boats The main enemy of the inflatable floor is mechanical damage and improper storage. Rodents in the garage can be a big problem, so keep the boat in limbo or in a sealed box with deterrents.
A typical fault is the etching of air through the valves, which is solved by replacing the sealing rings or cleaning the valve system from sand, and the glue at the joints can also dry out over time, but in quality models this is rare and usually after 5-7 years of active use.
- 🧼 After each fishing, wash the boat with fresh water, especially if you have been swimming in salt water.
- 💨 Dry the boat in straightened form in the shade before packing into a bag.
- 🔧 Check your pressure regularly with a pressure gauge, as the visual score is often incorrect.
- 🛡️ Use protective linings (treads) on the bottom with frequent landings on the ground.
Puncture repairs are usually easy. There's always a remix in the kit, and the key is to degrease the surface and use a special glue for PVC, allowing it to dry as instructed. Don't use Moment or any other universal adhesives, they can destroy the material.
Use a soap solution to look for micropunctures. If the boat is slowly deflating, but you can't see the holes visually, apply a lot of soap foam to the surface, and the leak site will give out inflatable bubbles.
Summary: Is it worth buying?
In conclusion, we can say that the boats River Boats NDNDM It's a compromise solution, but it's a very smart solution for a range of tasks, and it's not going to replace full-boats or hard aluminum boats for the harsh conditions of the north, but it's going to be the perfect choice for the mobile fisherman.
If you value assembly time, are limited in storage space or don't have a trailer, then low-pressure It gives you freedom of movement, and with care, it will last for years, with stability and comfort.
Boats River Boats NDND - the best choice for single fishermen and couples who value mobility and are not ready to sacrifice comfort for the rigidity of the paillon floor.
What is the optimal pressure to pump to the bottom of the NDND?
The manufacturer usually recommends pressure in the area of 0.2-0.25 atmosphere (or to the point of the arrow in the green zone on the pressure gauge, if any). The main rule is that in the sun the pressure will increase, so in the heat do not pump "to the point" in the room.
Can I put an electric motor on the River Boats NDND?
In fact, it's a great option for quiet fishing, but keep in mind that electric motors are heavy, and they need to be mounted on a transom, so they don't damage the balloon.
How many seasons does the inflatable floor serve?
With careful operation and proper storage (warm, without rodents), the inflatable floor lasts 5-10 years or more. The resource depends on the frequency of use and conditions of the reservoirs (the presence of driftwood, stones).
What is the difference between Floor and Floor?
BND is softer and lighter, extinguishes the impacts better, but less stiff on plane. Flat Floor is stiffer, holds shape better, but heavier and more expensive. The choice depends on the priorities: comfort of transportation or speed.