If you have ever been interested in buying an inflatable boat, you probably came across the term "pillet boat"But what does it mean in practice? It's not just a marketing ploy, it's a piola design that fundamentally changes the specifications of the craft, making it more sustainable, more comfortable and more functional. What is a solder boat?How it is arranged, how it differs from “non-pipeline” analogues and who really should choose it.

There is no question of the superiority of solder boats over classic ones, but the fact remains that more than 70% of professional fishermen and hunters in Russia prefer such models. power-engine, heavy loads and extreme operating conditions, but in order.

What is a solder boat: definition and key features

Pillet boat - is an inflatable floating craft (usually made of PVC), equipped with a hard floor of removable or built-in floorboard- Pyol. pajol "Deck" is a flat panel of moisture-resistant plywood, aluminum or composite materials that are laid on the bottom of the boat, forming a flat surface. slate boats), floorboards provide:

  • 🔹 Stringency of construction The boat does not bend under the weight of passengers and cargo.
  • 🔹 Improved manageability - better holds the course, less drift.
  • 🔹 Possibility of installing powerful motors (up to 30–50 hp depending on the model).
  • 🔹 Comfort on long journeys - Your feet don't get tired of the inflatable floor.

It is important to understand that the floorboards are shatterable (removable sections) and whole The first is easy to transport, the second is stronger and more reliable. Bark 320 or The flagship Profi 360 aluminum floorboards with stiff ribs are used, which allows you to withstand a load of up to 600 kg.

📊 What type of bottom is your boat?
Inflatable (sludge)
Pilled
Hard (aluminum/plastic)
Other

The design of the solder boat: what is it made of?

To understand why solder boats are so in demand, let’s analyze their device using the example of a popular model. NDND-330 (Wings production) The main elements are:

Component Materials Function
board PVC 1100 g/m2 (5–7 layers) They provide buoyancy, protect against waves
Paiola Plywood 12-18 mm, aluminum 3-5 mm Form a hard bottom, distribute the load
transom board Aluminum 10-15 mm Motor fastening, stern reinforcement
Stringers Aluminum profile Longitudinal ribs of stiffness under paioles

Special attention should be paid stringer These are longitudinal paioles that prevent bottom deflection, and budget models may not have them, which leads to a trampoline effect when you're driving on a wave. seat-bank (removable or embedded) and nose-section To store equipment.

⚠️ Attention: If floorboards are made from cheap plywood without waterproof impregnation, they will swell after 2-3 seasons.

Pieder vs. non-piercing boat: comparison of specifications

To get a good idea of whether you need a flatbed boat, compare it to classic inflatable models without a hard bottom.

  • 🚤 Sustainability: The solder boat does not "walk" underfoot, allows you to stand up in full growth (important for fishing), the unpillar boat - bends, requires caution.
  • 💨 Speed and handling: Hard bottoms cut water better, reduce drag, and sailing is less affected.
  • 🔧 Repairability: floorboards can be replaced separately, whereas damage to the inflatable floor often requires complete gluing.
  • 💰 Price: Pieder boats are more expensive by 30-50%, but pay off due to durability.

However, there are also disadvantages: solder boat is heavier by 20-40 kg, it is more difficult to transport alone, and assembly / disassembly takes 10-15 minutesIf you need a “once and ready” boat for short trips – a non-piole option may be more convenient.

Thickness of PVC (optimally 1000+ g/m2)

floorboard material (aluminum is preferable to plywood)

Stringers (required for motors over 15 hp)

Components (pump, paddles, repair kit)

Manufacturer's warranty (minimum 2 years)

-->

Who's a solder boat for?

Pieder boats are not a universal solution, but they are ideal for:

  1. Fishermen are pros. Hard bottom allows you to install sonars, fasten rod holders, stand during casting.
  2. Hunters. They can withstand the weight of equipment, dogs, trophies, models with high sides (for example, the weight of the car). Flagship Hunter) protect against spray.
  3. Tourists. Comfortable for multi-day hikes due to the flat deck and the possibility of installing an awning.
  4. Owners of powerful motors. Boats with floorboards and transoms can withstand engines from 20 hp, while non-piole ones - a maximum of 10-15 hp.

Here's for you. sports-rafting or cruising trips on calm waters The floorboards are redundant. Light sleigh boats or kayaks are better suited.

💡

If you plan to fish from a boat in winter, choose a model with floorboards made of frost-resistant aluminum (for example, the scalp is not a good idea). Bark 380 WinterPlywood becomes brittle at -10°C!

How to choose a soldering boat: 5 key criteria

When choosing, pay attention to:

  1. Size and payload.
    • 📏 Up to 320 cm - for 1-2 people (motor up to 10 hp).
    • 📏 340-380 cm - for 3-4 people (engine 15-30 hp).
    • 📏 400+ cm - for group hikes (motor 40+ hp).
  • Piol type. Aluminum is stronger but heavier; plywood is cheaper but requires maintenance. Zodiac Pro) - middle ground.
  • Tranza. For motors over 15 hp, a reinforced transom with a stainless steel winding is needed.
  • The board. Optimal height - 45-55 cm Low sides flooded with a wave, high worsen handling.
  • Package. In the basic set should be: pump, paddles, repair kit, bag for transportation.

    • Don’t chase brands – domestic producersFlagship, Wings, bark) often offer better price/quality ratio than foreign counterparts. The flagship Profi 360 with aluminum floorboards will cost 2 times cheaper Zodiac Cadet 380 with similar specifications.

    ⚠️ Attention: If the seller claims that the boat "can withstand 50 hp" but the passport says "maximum 25 hp" - you're cheating.

    Operation and care: how to extend the life of a solder boat

    The soldering boat will last 10+ years if you follow the following simple rules:

    • 🧼 After every exit Wash the floorboards with fresh water (especially if caught in a salty pond).
    • 🔧 Once a season Check the mountings of floorboards and stringers - weakened bolts lead to backlash.
    • 🏠 Keep it. the boat in a disassembled form in a dry room, paioles - vertically (so as not to deform).
    • 🛠️ Repairs. PVC punctures immediately - even a small hole under the floorboard will lead to a accumulation of water.

    For plywood floorboards, use it. yacht-varnish (for example, International PerfectionIt protects against moisture and UV rays. Aluminum paioles should be wiped with silicone lubrication. If the paiole is cracked, don't try to glue it with epoxy, replace it with a new one.

    What to do if the pyeol has started to rot?

    If the plywood floorboard is swollen or covered with mold:

    1. Dry it in the sun for 2-3 days.

    2. Treat with sandpaper (remove the damaged layer).

    3. Cover 2-3 layers of yacht lacquer with antiseptic.

    4 If the damage is critical, replace the floorboard completely. Aluminum floorboards do not rot, but they can corrode in the places of chipping paint.

    Top 5 Mistakes When Buying a Pied Boat

    Even experienced water-engineers sometimes make unfortunate mistakes. cannot do

    1. Saving on PVC. Material thicknesses of less than 900 g/m2 are guaranteed punctures through the season.
    2. Ignore the weight. An 80+ kg boat will require a trailer or assistance in transport.
    3. Buy without a test drive. For example, NDND-330 It may seem stable, but on the wave "nods" nose.
    4. Install the motor without a power reserve. If the boat is designed for 20 hp, "swing" it with a 25-horsepower engine is dangerous.
    5. Keep the paioles wet. This is a direct road to fungus and deformity.

    Before buying, be sure to check the boat on the water – many drawbacks (such as the vibration of the floorboards) are noticeable only in motion.

    💡

    The solder boat is an investment in comfort and safety, and it's more expensive than the non-pillar boat, but it pays off with durability, powerful motors and ease of use.

    FAQ: Frequent questions about solder boats

    Can I use a peyol boat without peyols?

    Technically, yes, but it's a design violation: the boat will become less stable, and the sides can deform from the load. Without the floorboards, you can only swim in calm water without the motor.

    How much do paioles weigh for a 360 cm long boat?

    Weight depends on the material:

    • Plywood 12 mm - ~15-20 kg (set of 3-4 sections).
    • Aluminum 3 mm - ~25-30 kg.
    • Composite - ~18-22 kg.

    The total weight of a floorboard boat is usually 50-90 kg.

    What glue to use for repairing peyols?

    For plywood suitable epoxy glue (for example, Poxipol), but only for small cracks: Aluminum paioles are repaired by welding or riveting; PVC boards are glued with special glue for boats (Prepared by the PVC side).Bostik 2402, Polyhiem).

    Can I put a stationary motor on a flat boat?

    No, the soldering boats are only for outboardThe stationary ones are mounted on rigid hulls (aluminum, fiberglass), the maximum power of the engine is indicated in the boat's passport.

    How to transport a solder boat?

    The best ways to do this are:

    • 🚗 On the roof of the car (in the case, paiola separately).
    • 🛶 On a trailer (if the boat is longer than 380 cm).
    • 📦 In the trunk (if the floorboards are collapsible).

    Do not transport the boat in assembled form - this deforms the paioles and sides.