When it comes to choosing a reliable boat for fishing and resting on the water, metal boats often come out on top in terms of strength and durability. Pella Fiord. It's a model that has become a kind of benchmark for an affordable and practical motobod, and its popularity is due to the combination of price, quality of metal and thoughtful design, which has made it popular for decades.
This boat is ideal for operation in difficult conditions where high speed is not required, but reliability is critical. Pella Fiord's boat This is often the first major acquisition for those who switch from inflatable PVC to full metal, and in this article we will look at all the nuances, from specifications to operating features, so that you can make an informed decision.
It's important to understand that, despite the age of the model, it's still relevant because of the possibility of upgrading, and the owner has a solid platform that can be adapted to suit all needs, from quiet fishing to water trips with family, and let's dive into the details and find out why this boat is still afloat and in demand.
Structural features and body
The basis of the entire design is a body made of aluminum-magnesium alloy AMg5. This material is not chosen by chance: it has excellent corrosion resistance and high strength during welding. The bottom is 4 mm thick, and the sides and deck are made of sheet thickness 2 mm. boat Pella Fiord to withstand severe impact loads, for example, when going ashore or colliding with underwater obstacles.
The hull contours are designed to be "deep V" in the bow, which ensures good germination on the wave. However, it is worth noting that when fully loaded, the boat can behave like a typical soft-drive "boat": the cheekbone is rounded, moving into the flat bottom to the stern, which contributes to stability in the parking lot and when trolling. Construction provides for the presence of a timber around the perimeter, which protects the sides from abrasion.
⚠️ Attention: Despite the high strength of the alloy, it is recommended to use keel protection or overhead strips when operating on rocky rivers, since the aluminum alloy AMG5, although durable, is not "immortal" in constant contact with abrasive.
To ensure buoyancy and unsinkability, there are foam blocks in the bow and under the floorboards, a critical safety feature that allows the vessel to stay afloat even if it is fully filled with water, and the interior space is organized reasonably for boats of this class, albeit without the frills inherent in budget models.
The secret of the durability of the body
Metal boats of the Pell series often last longer than their owners due to the use of welded seams argon-arc welding. This ensures the monolithic design, eliminating leaks on riveted joints, which are characteristic of older or cheaper counterparts.
Technical specifications and load capacity
When choosing a boat, you should always rely on dry numbers. Pella Fiord. The boat is 4.6 meters long and 1.65 meters wide, which makes it a medium-sized boat, which can accommodate 4-5 people comfortably, although officially the passenger capacity is often limited to four people for safety reasons. The empty boat weighs about 180 kg, which requires a trailer for transportation or a powerful winch.
The engine setup can vary depending on the year of release and modification, but the boat is standardly designed for outboard motors with a capacity of up to 30 hp (sometimes there are modifications under 40 hp, but this requires caution). The maximum speed with a full crew and a motor of 25-30 hp is about 35-40 km / h, which is enough to move around the water area.
Below is a detailed table of specifications that will help you compare Pella Fiord. with competitors:
| Parameter | Meaning | Note |
|---|---|---|
| Longest length | 4600 mm | Excluding transom |
| largest width | 1650 mm | In cheekbones |
| Height of board | 650 mm | Up the nose. |
| Load capacity | 400 kg | Including engine weight |
| Engine power | 30 hp. | Recommended |
The optimal power of the engine for Pella Fiord is 20-25 hp Installation of a more powerful engine will not give an increase in speed due to the hydrodynamic resistance of the body, but will significantly increase fuel consumption.
Interior and layout of the cockpit
The interior of the boat is designed with a utilitarian approach: fully removable paioles (seats) allow you to transform the cockpit into a cargo platform, which is especially convenient when transporting large loads, such as bicycles or large catches in boxes. The standard layout includes three cans (seats): nose, middle and aft.
The nose cockpit is spacious enough to fit equipment or use as a place for fishing in calm, but it is worth remembering the centering: when you go on the wave, it is better not to place heavy loads in the nose, so as not to burrow into the wave. deck has a grooving that prevents slipping, but many owners prefer to lay additional mats for comfort.
- 🚤 The forward trunk: A sealed compartment under deck, ideal for storing things that should remain dry.
- 🪑 Removable seats: Allows you to change the configuration of the cabin in a couple of minutes without using tools.
- 🔦 Fixtures: Places are provided for the installation of fishing rod holders and navigation equipment.
The drainage system deserves special attention: At the lowest point of the body, near the transom, there is a drain hole, which is closed by a plug, which must be opened only on land or on the move with a special valve (although on the classic Pelle Fiord it is often just a plug hole). Water removal It occurs by accident or forcefully if the pump is installed.
Operation and management on water
The behavior of the boat on the water depends on the distribution of weight and power of the engine. Pella Fiord. It's very predictable and stable, and it's great for trolling, because it has a low sail profile and it's stable, but you have a tendency to roll in side waves, which is the price of a relatively narrow hull.
When you get on plane (which is possible only with 1-2 passengers and a 20 hp engine), the boat gets up to the water gently, but requires the right differentiation. If the nose is too up, the boat will "jump" along the waves (dolphin). Adjusting the position of the engine on the transom and moving passengers allow you to find balance. Windy weather makes its own adjustments: the sailing of the high side can tear down the boat, so having an anchor and the ability to use it is mandatory.
⚠️ Warning: When operating in a solo, never be in the center of the boat, sit closer to the stern or use ballast in the nose to maintain proper differentiation and handling.
For fishing, this model is ideal because of its silence (metal extinguishes engine vibrations better than thin aluminum of some competitors) and the ability to install a sonar crane. Manipulation on small strokes is good, the turning radius is moderate. The main thing is not to make sudden movements with the steering wheel at high speed, since a flat bottom in the stern can lead to skiding.
Transport and storage
Issue of transport Pella Fiord. The weight of 180 kg makes it impossible for a single person to launch a boat without special devices. You will need either a good trailer or a slip-way with a winch. The dimensions allow you to carry a boat on a standard passenger trailer, but the width of 1.65 m may require permission depending on current traffic rules (although this usually fits into the dimensions without protruding parts).
When stored in winter, a metal boat requires minimal maintenance compared to fiberglass or PVC. However, if you keep the boat upside down on the ground, make sure the supports are in reinforced places (spangouts) so as not to deform the bottom under its own weight. Aluminum is not afraid of frost, but rubber seals and wooden elements (if any) are better removed.
☑️ Preparation for wintering
In summer, if the boat is standing on the water, you need to regularly check the condition of the shell on the bottom. Fouling increases weight and reduces speed. Metal housing allows you to use antifouling paints, but before that you need to carefully prepare the surface and primer compatible with aluminum.
Tuning and modifications DIY
Owners often don't stop at the factory, and the most popular upgrade is the installation. consoleThe regular rotary control of the engine is not convenient for everyone, especially for long transitions, and the installation of remote control (gas-reverse) and steering wheels radically changes ergonomics.
Lighting is also frequently upgraded, with running lights, a cockpit and a powerful noselight allowing you to move safely in the dark, and additional gear knobs will be needed, as a regular fisherman may not be enough.
- ⚓ Anchor system: Installation of an anchor-baller or roller on the nose will facilitate anchoring.
- 🔋 Electrical equipment: Installation of additional batteries for power sonars and navigators.
- 🛡️ Defense: Installation of Kevlar or rubber band on the cheekbones to protect against scratches.
When installing additional equipment (consoles, runduks), use only stainless fasteners (A2 / A4). Conventional steel will rust in one season and spoil the appearance of the boat, and it will be almost impossible to unscrew such bolts without damaging the hull.
Comparison with competitors and final verdict
In the metal boat market, Pella Fiord. There are competitors like the Crimea, the Ob, or more modern models from the Master and the Aqua. Unlike the Ob, Pella Fjord has more seaworthy contours and better behavior on the wave; compared to the Crimea, it is easier and easier to transport, although it is inferior in width to the cockpit.
The main advantage of this model is its maintainability, and any dent can be repaired, any hole can be brewed in any workshop, making the boat virtually immortal in skilled hands, and it doesn't require the kind of expensive maintenance that modern composite boats do.
In summary, it can be said that boat Pella Fiord It's a workhorse for those who value practicality over aesthetics, and it doesn't give you the sensation of a speedboat, but it does it in all weathers, it transports cargo and it lasts decades.
Do I need a license and registration for Pella Fiord?
Yes, the boat is subject to mandatory registration with GIMS, since its length exceeds 2 meters, and the potential engine power (even if the engine is temporarily removed) exceeds 8 hp (constructive power). To drive a vessel with an engine of more than 8 hp (5.88 kW) requires the right to operate a small vessel of category “M” (motorcycles and boats with PM).
What is the maximum weight that can be taken on board?
Passport capacity is 400 kg, which includes the weight of passengers, cargo, engine and fuel, and exceeding this limit is dangerous: the boat will lose stability, the sides will become too close to the water, and any sudden movement can lead to tipping or filling with water.
Can I cook the body myself?
Welding of AMG5 aluminum-magnesium alloy is possible, but requires special equipment (argon-arc welding) and qualification. You can not cook with conventional electric welding - the metal will burn out and lose its properties. For repair of serious damage, you should contact a specialized service.