Fishing from a swimming facility is very different from fishing from fishing from shore, requiring the angler not only skill, but also competent equipment. One of the key elements of ergonomics on board is a properly selected rod stand in the boat, which frees hands and allows you to control several tackles at once. Without this accessory, tingling becomes a constant retention of the rod, which quickly tires and reduces the concentration on the peck.
The modern market offers many solutions, from simple plastic glasses to complex metal structures with angle adjustment. universal solution There is no such thing as a boat (PVC or aluminum), fishing method (trolling, jig, feeder) and personal preferences, and in this article we will discuss all the nuances in detail so that you can make the right choice.
Main types of anchorages for floating craft
The first thing that fishermen encounter when designing a boat is the variety of designs, and all the supports can be divided into two large groups according to the way they are installed: fixed and removable. Stationary options are often integrated into the design of the boat when it is assembled or tuned, providing maximum reliability, but depriving mobility.
Removable models are more popular because of their flexibility, and can be mounted on board, on a can (seat) or on a transom. Onboard holders They are usually fixed to the top cylinder or side of a metal boat with screws or clamps, which allows you to quickly change the configuration of the gear depending on the fishing conditions.
Special attention deserves transomThey're ideal for trolling or plumb fishing, where the fishing rods need to be strictly behind the stern, without interfering with the rowing or motor operation, and there are models that are mounted directly on the seat, which is convenient for fishing in tight places.
- 🎣 Indented models: require drilling holes, provide "unkillable" fixation.
- 🔧 Overhead brackets: are attached by bolts to the elements of the boat without violating the tightness of the cylinders.
- 🪑 The anchorages on the jar: They are universal, easily transferred from place to place inside the cockpit.
⚠️ Note: When choosing overhead mounts for inflatable boats, make sure that the metal parts do not have sharp edges that can damage PVC fabric when pitching or vibrating.
The choice of the type of attachment also depends on the material of the stand itself: Plastic is cheaper and lighter, but less durable in the sun; Metal (stainless steel or aluminum) is stronger, but requires protection against corrosion, especially in salt water.
Manufacturing materials and their impact on durability
Aggressive aquatic environments dictate the rules of any accessories, the rod stand in the boat is constantly exposed to ultraviolet light, salt spray and mechanical stress, so the material of execution plays a critical role in the life of the product.
The most common material is ABS plasticIt's cheap, light and it doesn't rust. But the quality plastic has to be UV-resistant, otherwise it'll be brittle and crack in a couple of seasons, and cheap Chinese plastics are often the ones that are wrong with the low quality polymers.
Metal structures made of stainless steel brand 316 They're considered the gold standard, they can withstand heavy loads when catching large fish and they don't deform. But the price of these products is much higher. Aluminum alloys with anode coating are preferred for lightweight inflatable boats, as they weigh less and do not heat as much in the sun as steel.
When buying, pay attention to the fittings. Even if the case is plastic, the internal elements and screws must be made of stainless-makeConventional steel will rust after the first season, oxides can stain tackles and clothing, and the fasteners will sour and you won't be able to dismantle the holder.
Instructions for installing the holder yourself
Installation of the accessory requires care, especially if we are talking about an inflatable boat made of PVC. Incorrect installation can lead to loss of leakage or damage to the cylinder. First, you need to determine the optimal place of installation, so that the fishing rods do not interfere with the control of the boat and rowing.
If you choose the base adhesive option (a popular PVC method), the surface should be perfectly clean and fat-free. Use a special PVC glue or epoxy resin if the design allows. Metal boats are more likely to be drilled and mounted on rubber-sealed bolts.
☑️ Pre-installing check
The process of installing a cut glass in the transom of a metal boat is as follows:
- Mark the center of the future hole.
- Drill the pilot hole with a small diameter drill.
- With a crown on the metal, cut the hole of the desired diameter.
- Clean the edges of the burrs and cover with anticory.
- Set the glass, laying a rubber puck, and tighten the nut.
⚠️ Note: When drilling an aluminum transom, use only sharp drills and low rpms so as not to overheat the metal and not deform the edge of the hole.
It's also important to consider the angle of inclination, which is 45 to 60 degrees for trolling, 90 degrees for plumbing, and some of the current models allow you to adjust this on the go, which is a big plus.
Comparative table of popular models
To make the choice easier, we have compiled a comparison of several popular holder types on the market, based on an analysis of user specifications and feedback.
| Model/Type | Materials | Type of attachment | Price (probational) |
|---|---|---|---|
| Plastic Cup Basic | ABS plastic | On glue/scotch | Low. |
| AluMount Pro | aluminum | On bolts (mutted) | Medium |
| Steel Troll Master | Nerzh. | On the transom (clamp) | High. |
| Universal PVC Fix | Plastic + steel | Inflatable platform | Medium |
As you can see from the table, the range of prices and functionality is large, budget plastic models are suitable for rare fishing in calm water. metalwork.
The secret of durability of fasteners
To extend the life of any fasteners, even stainless steel, it is recommended to lubricate threaded joints with silicone lubrication once a season, which will prevent the metal from boiling and will allow you to easily remove the holder if necessary.
Features of operation in different conditions
Fishing conditions dictate their equipment requirements, and in the fast-flowing or trolling at high speeds, the load on the holder increases many times over. fishing-rod And the form creates a significant leverage on the anchoring point.
Winter fishing also makes its own adjustments: Plastic in the cold becomes brittle, and an accidental blow with a sparkle or ice blizzard can split the glass, while metal in the cold becomes cold and can freeze to the hands, so wearing gloves is mandatory.
When fishing from a boat, it is important to ensure that the line or wicker cord does not rub against the side. A properly installed stand should divert the rod form from the cylinder, preventing it from being damaged when the fish jerk. Height of board Often dictates the length of the holder's leg.
Use hambricks or soft linings on the metal parts of the holder if there is a risk of contact of the line with metal when catching to avoid cutting the cord.
Common mistakes in selection and installation
Many anglers make the mistake of buying the first accessory they come across, and the most common is ignoring the diameter of the rod's rod. Standard glasses are often about 30-35 mm in diameter, while a powerful spinning comet can be wider and a light one can be narrower, and as a result, the fishing rod either dangles or does not fit.
The second mistake is saving on fasteners, using conventional black screws instead of galvanized or stainless bolts will lead to rapid corrosion, rust not only spoils the view, but also weakens the connection, which can lead to loss of gear during pecking.
The third mistake is to put the holder on the eye without considering ergonomics, and if the stand is set too far or at an uncomfortable angle, the cutoff will be delayed or uncomfortable. Corner of attack The slash should be natural for the fisherman's hand.
⚠️ Warning: Never use screws that go right through the cylinder in a PVC boat without a special sealing platform or heel. This is a guaranteed hole and loss of buoyancy.
The main criterion for success is the correspondence of the diameter of the holder to the rod’s komb and the reliability of fixation in conditions of vibration and jerks.
Also worth mentioning is the storage error: leaving plastic holders in the sun in winter storage is not recommended - they can deform. Metal products are better smeared with conservation lubricant.
FAQ: Frequently asked questions
Can the holder be glued to the PVC balloon with ordinary superglue?
No, absolutely not. Conventional cyanacrylate adhesives ("superglue") do not have the necessary elasticity and adhesion to PVC in water conditions. They will crumble at the first deformation of the cylinder. Use only specialized adhesives for PVC (for example, polyurethane) or two-component epoxy compounds designed for flexible materials.
What diameter of the hole is needed for a standard spinning?
The diameter of the inner hole of the glass is 32-34 mm. However, if you use specific rods with a very thick handle (for example, some models for sea fishing), you may need holders with a diameter of 40 mm or more.
Do the holders rust from “stainless steel” in salt water?
AISI 304 stainless steel can be subjected to surface corrosion in aggressive salty environments, especially in welded seams. AISI 316 steel is ideal for sea fishing. Aluminum in salt water requires anodizing, otherwise it oxidizes very quickly.
How to fix the fishing rod if there is no special glass?
In emergency cases, you can use homemade solutions, like a piece of plastic pipe that is taped to a can, but this is a temporary measure. It is safer to buy a universal holder on a suction cup or a pinch that can be secured behind the side or a seat without drilling.
Does the stand affect the balancing of the light boat?
One or two metal stands weigh little and will not have a critical impact on the stability of the boat. However, if you install a massive rail with 4-6 heavy metal holders on board a lightweight inflatable boat, this can shift the center of gravity.