Installation turning-pad The ability to turn 360 degrees without having to get up drastically changes the way we fish, making the process of catching a trophy or throwing a spinning trophy as efficient as possible. Many owners of swimming equipment hesitate to take this step for fear of damaging cylinders or disrupting the stability of the vessel, but modern solutions completely eliminate these risks.
Well-chosen pivot Not only does it add convenience, it also improves safety by allowing the fisherman to maintain a steady position even when the big fish are jerking, and unlike static cans, it allows him to control the space around the side without twisting his spine, especially in long fishing sessions, when back fatigue can be a critical factor.
The choice of a particular model depends on the type of watercraft, whether it is inflatable. PVC The market offers many options, from simple plastic disks to complex systems with height adjustment and sliders, and it is important to understand the difference between them so as not to overpay for unnecessary functionality or, conversely, not to buy too weak a design that will fail at a critical time.
Classification of swing mechanisms and types of anchorages
All the mechanisms on the market can be divided into several main categories according to the type of fixation and the material of execution. pivotPlastic variants, often called "sandwiches," consist of two discs with slip bearings inside and are suitable for light tasks.
For more serious loads, for example, when installing a heavy chair with a tackle box or when trolling, metal structures are needed. mechanism They have excellent corrosion resistance and high strength, with a weight of up to 150 kg or more. Steel counterparts are even stronger, but require an ideal paint coating, since the risk of rust on them is higher.
⚠️ Attention: When choosing a mechanism, pay attention to the presence of a stopper. The position locker allows you to clamp the disc at the right angle of rotation, which is critical in choppy conditions, so that the chair does not spontaneously rotate under the influence of inertia.
Fastening to the boat is the second most important aspect of classification. Inflatable boats are most commonly used inflatable platform or removable frames fixed by slings. Rigid housing allows the use of indented or welded bases that ensure the monolithic structure. 2-3/4" The M10 allows you to change seats and tables in seconds.
Special attention should be paid to combined systems that include a slider (back-and-forth shift). combination It gives you maximum freedom of action, allowing the fisherman to move to the board to feed the fish while remaining in a sitting position, but such knots are more difficult to maintain and require more careful lubrication of moving parts.
Manufacturing materials: plastic, aluminum or steel
The choice of material directly affects the life and reliability of the entire structure. turn-disc They're very attractive for low cost, no corrosion, and they're ideal for quiet fishing in small waters, where there's no strong wave and extreme loads, but in the cold, some plastics can become brittle and, when exposed to ultraviolet light, they lose strength over time.
Aluminum is considered the "gold standard" for water-motor-themed light alloys such as: D16T Or aviation aluminum, which combines metal strength and light weight, anodized coatings that protect the material from aggressive salt water, and they don't rust, they clean easily, and they look aesthetically pleasing even after many seasons.
Steel structures are the choice for those who prioritize maximum load capacity. chair With an integrated refrigerator or a heavy fishing chair, steel is the best choice, and the main requirement is a quality powder paint or galvanizing, and any scratch on this coating must be treated immediately, or the oxidation process will begin.
To extend the service life of metal mechanisms, it is recommended to wash the moving parts with fresh water after each fishing in salt water and apply silicone lubrication.
The comparison table will help to determine the choice of material depending on your tasks:
| Parameter | Plastic. | aluminum | Steel |
|---|---|---|---|
| Weight. | Very light. | Light. | Heavy. |
| Load capacity | Up to 100 kg | Up to 150 kg | More than 200 kg |
| Corrosion resistance | High. | Very high. | Medium (depending on coverage) |
| Price. | Low. | Medium | High. |
Features of installation on PVC boats
Installation of the turning pad on an inflatable boat requires a special approach, since drilling cylinders is strictly prohibited. The main solution here is the use of special inflatable platforms or rigid removable frames. The platform is an additional balloon with a flat top on which it is installed. fixationThis solution is safe, but it takes up useful space in the cockpit.
A more popular option is the use of removable aluminum frames, which are fixed on the staff strap-lear These frames are rigidly bound to the sides, creating a stable base, and it is important that the frame does not touch the inflated cylinders with sharp angles, so all points of contact should be protected with soft linings.
☑️ Verification of PVC installation
When installed on a can (seat), it should be borne in mind that standard plywood seats may not withstand dynamic loads when rotating. It is recommended to reinforce the can with an additional sheet of plywood or use a special reinforced platform.
There are also models of inflatable base sites that replicate the contours of the bottom of the boat, which provide perfect stability, but require time to pump and deflate, and it is critical for these systems to properly match the pressure in the base cylinder so that it does not deform under the weight of the angler.
⚠️ Warning: Never install rigid metal structures directly on PVC tubes without a protective layer. Vibration and friction during the movement of the boat quickly wipe even the most durable material.
Installation of aluminum and plastic boats
The owners of boats with a rigid hull are more fortunate: they can use mortar or welded bases.Kazanka, Ob, Wind) The best option is to weld the return pad, which ensures the monolithicity of the joint that will withstand any overload, but this operation requires the skill of welding with argon or gas, so as not to burn through the thin metal of the board or bottom.
If welding is not possible, mechanical attachment is used on bolts or rivets, in which case the holes must be carefully sealed to prevent water from entering the hull. This is done by using special polyurethane-based marine sealants that retain elasticity after drying. Be sure to mark the installation site before drilling, taking into account the radius of rotation. chair.
On plastic boats (PDFs), drilling is also permissible, but requires the installation of reinforcing washers on the back of the side. Plastic is prone to "creeping" under load, so the attachment points must be strengthened. Often plastic housings use adhesive compounds using two-component epoxy compounds designed to glue polyethylene.
The universal solution for rigid housings is removable bases on suction cups or rods, but their reliability at high speed or at high wave causes questions. For serious operation, it is better to choose a stationary option. A properly installed base will allow you to use not only chairs, but also rod holders, tables and sonars.
Do I need to strengthen the bottom during installation?
If you are placing a heavy chair on a thin aluminum bottom, it is recommended to put a sheet of plywood or aluminum 3-4 mm thick, pre-smeared with a sealant, under the platform, this will distribute the point load and prevent deformation of the body.
Compatibility with different types of seats
The turning pad is only half the success. The second half is the right seat. 2-3/4" The M10 is the most common aqueous seat in the world, and is fitted with classic fishing chairs, often referred to as "French" because of their popularity in Europe, which are usually soft backed and armrested.
For lovers of comfort there are transformer-chairThey're heavier than standard ones, but they allow the back to rest during the long wait for the stick. It's important to check the maximum load specified by the manufacturer, because the tilt mechanism creates an additional lever effect on the rotary assembly.
Seats with integrated gearboxes are also popular, and they are functional, but their center of gravity can be shifted, which puts additional stress on the bearings of the platform when you rotate. pivot It has a reinforced design and reliable stopper.
And the budget options, which are plywood or plastic seats without backrests, are light and simple, but they don't provide the support they need. They often require adapters because the standard mounting may be different from the standard of the site. Always check the equipment before you buy.
The ideal pair is an aluminum swivel pad with a bearing assembly and an ergonomic seat with an adjustable backrest, which combines maximum comfort and durability.
Care, maintenance and typical mistakes
Any mechanism that works in conditions of high humidity and the presence of abrasive particles (sand, silt), requires regular maintenance. The main attention should be paid to lubricating bearings or bushings. For aqueous environments, lithium-based lubricants or special sprays with Teflon that push water out and create a protective film are best suited.
A common mistake is to ignore the backlash, and if the chair starts to wobble or creak, you need to immediately disassemble the knot, clean it of dirt and old lubricant, and then replace the worn-out elements. Operating a loose platform can lead to the mount breaking and the angler falling overboard.
Winter storage also has its own peculiarities: metal parts are better removed, washed and lubricated with conservation lubricant; plastic elements should not be left in direct sunlight, as UV radiation destroys polymer bonds. Rubber seals (if any) should be treated with silicone to prevent them from drying out.
Cleaning the mechanism after fishing is a mandatory procedure. Fresh water washes away salt, which is the main enemy of metal. Pay special attention to hard-to-reach places under the disk where sand can accumulate. Using a high-pressure washer is not recommended here, since the jet can drive dirt deeper into bearings.
How often should the rotary mechanism be lubricated?
It is recommended to clean and lubricate completely at least twice a season, before and at the end of the fishing season, and if you fish in salt water or in silted water bodies, prevention should be done after each trip.
Can you make a turning point yourself?
Theoretically, you can use car shock absorbers or ready-made furniture mechanisms. However, homemade structures rarely have the necessary tightness and corrosion resistance. The risk of jamming or breakage on the water is too high, so it is better to use certified products.
Will the fisherman’s weight be able to withstand the winter clothes?
The high-quality industrial designs are designed to carry loads of up to 120-150 kg, which is quite enough for a person in a winter suit, the main thing is to make sure that the mounting of the site to the boat is also reinforced and corresponds to the weight category.
Why is the new chair creaking?
Screaming can occur because of metal friction in the attachment areas or because of the lack of lubrication in the bushings. Try putting plastic washers under the mounting bolts or smearing rubbing surfaces with silicone spray abundantly.
What is the diameter of the hole for the M10 standard installation?
A standard threaded hole has a diameter of 10 mm. However, to install a stud often requires a drill with a diameter of 8.5-9 mm for subsequent cutting of the thread with a tag, or 10.5-11 mm if a bolt connection with a nut from below is used.