Inflatable vessel operation is not just about having a hull and oars, it's about an ecosystem that requires proper equipment. Owners often underestimate the role of specialized accessories, relying on improvisation, which leads to a loss of time and nerves directly on the water. PVC-boat-device They radically change the level of comfort, turning the Spartan conditions into a full-fledged fishing headquarters.
Many beginners make the mistake of buying an expensive boat, but saving on little things that provide safety and convenience. Lacking a rudimentary anchor or spinning fixture can ruin a day of fishing. In this article, we’ll look at what technical solutions are really needed and what are redundant, so you can assemble the perfect kit for your tasks.
The modern market offers thousands of options, from Chinese plastics to aviation aluminum. PVC material It requires a special approach to attachment of equipment: you can not just screw a screw into the side, each element must be installed taking into account the elasticity of the cylinders and the distribution of weight load, so as not to disturb the driving performance of the vessel.
Safety and anchor system
The foundation of safe water is a reliable anchorage, and using a conventional rope, wrapped on your hand or tied to a bank, is not only uncomfortable, but dangerous in high winds or currents. anchor-winches The holders allow the vessel to be fixed instantly and released as quickly as necessary.
Special attention should be paid to the mounting point, and inflatable boats use special dips or transom mounts for this. The ideal solution for boats longer than 3 meters is the installation of an anchor ditch on the nose with a drawer roller.This prevents the anchor tile from being overrun by the nose in the wind.
Use vertebral carbines to rule out twisting of the anchor cable, which can cause it to break or anchor to get stuck.
There are several types of mounts that are worth considering:
- 🛡️ Trans holders - fastened to a transom board, suitable for light anchors up to 2 kg.
- 🛡️ Nasal squirrels - installed on the nose handle or a hinge bar, provide the best windbreaker.
- 🛡️ Automatic winches - Expensive, but convenient devices for frequent change of fishing places.
Remember that the weight of the anchor should be about 10% of the displacement of the boat with crew and equipment, and neglecting this rule will lead to the fact that the boat will constantly demolish, and fishing will turn into a fight against the elements. PVC boats It is also critical to have an anchor end with a float so that the anchor can be found and raised at the cliff.
Properly organized anchorage is not just comfort, it is your insurance against demolition on the fairway or in a dangerous area.
Ergonomics of seats and transpanel plates
The regular banks that come with most budget models are rarely comfortable. Hard plywood, covered with slippery film, turns into back torture after an hour of fishing. Modernization begins with the replacement or redesign of seats, because it directly affects the fatigue of the angler.
Modern. backseat They often have soft inserts and adjustable heights, but they require a center of gravity to be installed, and a seat that is too high can make a boat roll, especially in windy weather or when water is turbulent.
The Secret to Sustainable Seat
When installing a high chair, use additional stretch marks to the timber or board to fix the structure and prevent it from tipping over with a sharp roll.
For those who like to fish in idle boots or with a lot of equipment, transom plates and shelves will be an excellent solution, which allows you to unload the cockpit and move the weight to the sides or transom:
- 🪑 Box seats - combine the function of a seating place and a sealed container for things.
- 🪑 transom benches They are attached to fun hangouts, freeing up space in the center.
- 🪑 Turning chairs Require a hard base (floorboard), but provide maximum comfort.
When choosing a frame, consider the material of the frame: aluminum profiles are preferable to steel ones, as they are not susceptible to corrosion and are lighter in weight. The fasteners should be made of stainless steel or high-quality plastic that is resistant to ultraviolet light.
Organization of space and storage of gear
Chaos in the boat is the main enemy of productive fishing. When you have to search for passages or uncouple tangled spinning, time runs out and the stick can run out. The competent organization of space with specialized holders and pockets allows you to have everything at hand.
The key element here are rod holders, which are soft (tissue) and hard (plastic or metal). spinner preferably, since they reliably fix the fishing rod collage and do not allow it to fly out when pecking or rolling.
☑️ Organization of the workplace
For small things, seals and organizer bags are ideal, which can be attached to the sides with Velcro or carbines, and it is important that these elements do not rub against cylinders when moving, otherwise the risk of puncture increases many times, use soft attachments or lay fabrics.
Trans wheels are another gadget that is difficult to imagine transporting a heavy boat without. They can be removable and stationary:
- 🚚 Removable wheels They take up little space but require installation time before each trip.
- 🚚 Fixed (folding) - always ready for work, but can interfere with rowing or fishing in shallow water.
- 🚚 Wheels-trailers - a separate trolley, convenient for transporting a boat over long distances on land.
Protection of the boat and extension of service life
While PVC is durable, it is vulnerable to mechanical damage, especially in contact with soil, rocks or shells. Using protective gear is an investment in the longevity of your vessel, which pays off without expensive repairs.
Keel belt (tread) is a must-have for boats that often dock ashore, and it takes the brunt of the boat's pulling to land, and if the regular tape is worn or missing, it must be glued on its own using special glue and fabric from the ground. PVC.
⚠️ Attention: When sticking additional protection (keel tape, stringers), be sure to degrease the surface and use only specialized two-component adhesives designed for polyurethane and PVC fabrics. Conventional superglue or rubber glue will not provide proper adhesion and elasticity.
And you also have to pay attention to the transmutation protection, and the constant impacts of the lower unit motor can damage the transmutation board. cross-plate or an additional layer of rubber/PVC at the point of contact with the motor will prolong the life of this critical area.
Why is the defense falling off?
A common reason for unplugging treads is the ingress of moisture or dirt between the layers when sticking, as well as the absence of a temperature regime (the glue should dry at a temperature above + 15 ° C).
Use special covers to store the boat during the off-season or between departures, which protect the material from ultraviolet radiation, which is the main enemy of PVC, causing it to age and crack. Even if the boat is stored in the garage, the light from the window can harm.
Navigation and electronics on board
Modern fishing is unthinkable without a sonar, a GPS navigator and perhaps a radio station, and the installation of these devices on an inflatable boat has its own peculiarities related to vibration and humidity, the main requirement is rigid fixation and protection from splashes.
The most popular solution is the rotary brackets that are attached to a jar or a transom, which allow you to quickly remove the device and put it in a bag. floating-sensor, which are attached to a flexible bracket to the transom and are not afraid of blows to the bottom.
Exemplary scheme of equipment placement for optimal operation:
| Dashboard. | Place of installation | Type of attachment | Features |
|---|---|---|---|
| Echolot (Head) | jar or trench | Turning bracket | Sun protection and splashing |
| Sonar sensor | transom (outer side) | Flexible bracket | Bottom view, impact protection |
| GPS-navigator | nose or jar | Hard bracket | Stable signal, visibility |
| Battery | nose-dump | cockpit | Balancing the boat, protection from moisture |
Powering electronics is a separate topic. Use only sealed connectors and wires in high-quality insulation. Copper contacts You need to lubricate with a special lubricant to prevent oxidation with salt water.
Comfort and additional accessories
When basic safety and functionality needs are closed, it's time to think about comfort. On the water, the weather changes rapidly, and being able to shelter from rain or the scorching sun can save fishing.
Tents and visors are popular devices, and they can be stationary (on arcs inserted into the nests) or stretch. Tent-transformer It allows you to quickly turn an open boat into a shelter from the rain, while maintaining your view.
When installing the awning, make sure that the attachment points do not fall on the same places all the time, so as not to wipe the fabric of the cylinder.
And the little things that make it more enjoyable, the cup holders, the bait tables, the phone holders, all make it feel like a home, but remember the balance: every extra gram on board affects the sludge.
⚠️ Warning: Avoid placing heavy metal structures (such as massive tables) on one side of the boat, which can cause critical roll, especially when combined with the weight of the angler shifted to catch the trophy.
Use it. air-cushion Or special mattresses for resting between casts, which are lightweight, take up minimal space in the deflated form and greatly increase the comfort of waiting for hours of cool.
Frequently Asked Questions (FAQ)
Can I attach accessories to scotch or duct tape?
Scotch, tape and conventional glue cannot withstand water stress, sun heating and contact with moisture. Use only mechanical fasteners (bolts with wide washers through floorboards) or specialized PVC adhesives designed for repair and tuning.
How often should the reliability of installed devices be checked?
Check the mounts before each outing, vibration from the motor and constant load from wind and waves can weaken the bolts or move the Velcro, pay special attention to anchors and electronic mounts.
Will the installation of additional accessories affect the boat warranty?
If you drill holes in cylinders or transoms yourself, it almost always voids the manufacturer's warranty on these nodes. Try to use attachments attached to the piers, fun lumbers or banks, without violating the integrity of the main structural elements.
How much weight can the spinning curtain holders withstand?
Quality plastic or aluminum holders are designed to hold a rod weighing up to 1-1.5 kg (including the coil and bait). However, with a strong bite of large fish, the load may increase.