Legendary Progress 2 It still plows through the vastness of domestic water bodies, drawing the respect of experienced water-engineers for its indestructibility. It is not just a historical exhibit, but a full-fledged working vessel, which is often inherited or bought for symbolic sums. However, before you drag such a trophy home on a trailer, you need to clearly understand its real dimensions.
The question of the size of the Progress 2 boat -- length and width -- is not just a question of curiosity, but it's critical to calculating the payload, the engine, and, often forgotten, the possibility of transporting a passenger car on the roof. Many car owners make the mistake of relying on the approximate numbers on the Internet, forgetting about the protruding parts of the hull.
Length and width are basic parameters, but they don't give a complete picture without considering the height of the board and the shape of the bottom. In this article, we'll break down the geometry of the hull in detail so you can make an informed decision about buying or upgrading your boat. Understanding the exact dimensions will help avoid problems with mooring and storage.
The geometry of the housing: the main parameters of length and width
In the dry language of technical documentation, the overall Boat length Progress 2 It's exactly 4,600 millimeters. It's four meters of sixty centimeters of clean space from the transom to the forehead. But in practice, if you measure it with all the protruding elements, like a beam or a quilson, it can vary slightly, but the base value is always 4.6 meters.
The mid-spangout hull (the widest part) is 1,700 millimeters wide, which is a pretty impressive figure for a boat of this class, providing good wave stability. It is the length-to-width ratio that gives this model the seaworthiness that fishermen in large waters appreciate, and the narrow hull here does not smell, which is a big plus for stability.
It is important to note that maximum width of 1.7 m It's reached in the middle, and the hull is smoothly narrowed to the bow and stern, and this liner allows you to cut the wave efficiently, although it creates some resistance at low speeds. For a beginner, these numbers mean one thing: the boat will be stable, but wide for maneuvering in narrow ducts with dense vegetation.
When planning a storage site, consider that a 1.7-meter width can prevent a boat from being brought into a standard garage without dismantling the deck or mounting it on its side. A 2.5-meter-wide garage gate will miss the boat, but there will be little room for people to pass along the sides, an important nuance for those planning winter storage indoors.
Height of the board and the effect on passenger capacity
The height of the side is a parameter that is often ignored by looking only at the length and width. Progress 2 The height of the board is 700 millimeters (70 cm), a high enough figure that, combined with a width of 1.7 m, creates a sense of security even in high winds.
But the high landing has the flip side, and when you're fully loaded (three or four people plus gear), the center of gravity rises. If you distribute the weight unevenly, for example, all passengers on one side, the roll will be palpable. The design of the boat allows you to withstand such loads, but the comfort of swimming decreases.
According to the data-sheet figures, passenger capacity It's limited to four adults, which means that there's a lot of deck space per passenger, and if you use a two-person boat, the space seems redundant, so you can carry a lot of cargo, like a tent camp or a big catch.
⚠️ Attention: Despite the high sides, it is not recommended to stand up in full height without extreme necessity. The center of gravity of the boat is shifted, and the sudden movement of a standing person can lead to a dangerous roll, especially on the wave.
For people of short stature or children, a 70 cm height can be an obstacle to a comfortable beaching from a gentle slope, in which case having a reliable ladder or assistance from a neighbor in the parking lot becomes a necessity, not just a convenience.
Weight specifications and load capacity
The weight of the hull is a sore subject for all metal boat owners. Progress 2 The weight of the case with the equipment (a pump, a seat, but without a motor) is about 250 kilograms. The figure is impressive, and it is almost impossible to move such a machine alone without the use of special devices or the help of machinery.
The maximum payload is 500 kilograms, which includes the weight of people, motor, fuel, equipment and anchors, and if you subtract the weight of the motor itself (say 30-40 kilograms) and the fuel, the payload is about 400 kilograms, which is enough for a comfortable fishing trip for three adults with a full set of gear.
- 🎣 Fishers: The load capacity allows you to take a sonar, navigator, drawer with baits and food for the whole day without the risk of overload.
- 🏕️ Tourists: You can load a tent, sleeping bags and boilers, but you will have to carefully plan the placement of the cargo for balancing.
- ⚓ Hunters: Transportation of the dog and equipment is possible, but you need to make sure that the animal does not rush on the deck, violating stability.
When calculating weight, remember about the “dead cargo” – water that can accumulate in the hold or absorb into wooden elements (flooring, seats) Regular drying of the boat after each foray will help keep the weight within the calculated values and prolong the life of the hull.
☑️ Pre-launch checks
Transportation: trailer or roof?
Transportation Progress 2 The length of 4.6 meters and weight of 250 kg make transportation on the roof of a passenger car extremely difficult and dangerous. Standard roof trunks are rarely designed for this length and weight, and the aerodynamics when driving will be terrifying.
The ideal solution is to use a light trailer. However, the dimensions resurface here. The trailer should be at least 5 meters long so that the boat hangs no more than 10% of its length (although traffic rules allow an overhang of up to 2 meters provided that the sign "Long" is installed, which is not relevant for 4.6 m, but the stock is needed). The width of the trailer should be at least 1.8 meters so that the sides do not interfere with the installation of the pawns.
If you plan to change water bodies often, the trailer becomes a must-have, allowing you to quickly load and unload the boat without risking damage to the body of the car or getting a fine from the traffic police inspector.
| Parameter | Meaning | Note |
|---|---|---|
| Length overall | 4600 mm | No motor. |
| maximum width | 1700 mm | Midel-spangout. |
| Height of board | 700 mm | From the top edge |
| Body weight | ~250 kg | Depends on the year of issue. |
When transporting over long distances, be sure to check the reliability of the boat attachment to the trailer every 100-150 kilometers. Vibration and oncoming air flow can weaken the belts or screeds, which will lead to displacement of the hull and a potential accident.
Motor power and speed specifications
Although the topic of the article is size, it is impossible not to mention how the dimensions affect the choice of engine. For a body with a length of 4.6 m and a width of 1.7 m, the optimal power is from 10 to 15 hp Motors of lower power (2-5 hp) will only slowly move against the current, but will not lead the boat to planing.
With a 10-12 hp engine. Progress 2 It's a plane-driven one or two passengers, and it's about 25-30 km/h, which is a comfortable fishing and cruising mode, and a more powerful motor (15-18 hp) is possible, but requires a stronger transom and a very careful handling, because a flat bottom (although Progress has a small keel) can cause high-speed wave impacts.
The secret to plane
For a safe getting on plane with a heavy load, distribute the weight so that the nose of the boat slightly lifted. Passengers are better to sit closer to the transom or in the center, avoiding the bow.
Fuel consumption is directly dependent on loading and speed. At a cruising speed of 20 km/h, a two-stroke engine with a capacity of 10 hp will consume about 3-4 liters of the mixture per hour, an economical mode that allows you to spend a whole day on the water with a tank of 12-15 liters.
Features of operation and modernization
Knowing the exact dimensions, many owners are tuning in, and installing a plywood or composite deck is a popular move. However, adding additional layers of material increases the weight of the boat, which can reduce payload, and each sheet of 10 mm thick plywood will add tens of kilograms to the hull.
The installation of rundooks and boxes must also be planned with the width of the cockpit in mind. Too wide rundoos can clog the passage, making it uncomfortable to move around the boat. The optimal width of the passage for comfortable movement is at least 50-60 cm.
⚠️ Attention: When installing additional equipment (navigation, sonar, light), watch the balance. Shifting the center of gravity in the nose can cause the boat to "buried" in the wave, and the displacement in the stern - to yaw.
Remember corrosion: The aluminum alloy that Progress is made of is susceptible to electrochemical corrosion when it comes into contact with other metals, and all additional elements must be securely insulated or made of compatible materials.
Use neutral curing silicone sealants to seal the slits. Acid sealants can cause the aluminum casing to corrosion at the application site.
FAQ: Frequently asked questions
Can I transport Progress 2 on the roof of VAZ 2109?
Theoretically, you can, if the length of the roof allows (it's about 4 meters), but it's extremely dangerous and inconvenient. Weight 250 kg is the limit load for the roof and racks. Also, overhangs of 30 cm in front and back will create a huge sailing. Better use a trailer.
What is the maximum weight of the engine?
Normally recommended up to 12-15 hp transom Progress 2 is quite durable, but do not get carried away. the engine heavier than 40-45 kg can overload the stern, especially when the boat is fully loaded with people.
Will Progress 2 fit into a standard garage?
A standard garage has a gate width of about 2.5 to 3 meters and a depth of 6 meters. The width (1.7 m) of the boat passes freely. The length (4.6 m) also fits with a margin. The problems can only arise with height if you plan to keep the boat on a trailer with an awning or keel installed.
How safe is Progress 2 on the wave?
With a width of 1.7 m and a height of 0.7 m, the boat has good stability. It is not as rolling as the narrow Kazankas. However, a flat bottom (the keel is weak) can lead to hard impacts on the oncoming wave at high speeds.
Progress 2 is a trade-off between capacity and speed, ideal for relaxing fishing and family vacations, but requires a serious approach to transportation.
To sum up, Progress 2’s size – 4.6m long and 1.7m wide – makes it one of the most versatile craft in the Soviet and post-Soviet spaces, demanding respect for its weight and dimensions, but in return delivering reliability and capacity that are difficult to find in today’s lightweight counterparts.