Going out on a small boat is a major change in how we fish, providing access to deep brows and land-based dumps that are not accessible from land, and not only does motorized fishing require knowledge of fish habits, but also an understanding of the specifics of boat management, safety and equipment. Unlike shore fishing, fishermen are limited to the cockpit space, but in return get mobility and the ability to catch any horizons of the pond.
Many beginners make the mistake of thinking that having a motor solves all problems, but not being able to anchor properly or run through the wind can ruin the whole process. Stability of the platform And comfort is a direct influence on performance, so you have to be careful about how you choose a vessel, and modern inflatable boats have great seaworthiness, but they have their own wind load and wave limitations.
In this article, we will take a closer look at the nuances of choosing a boat for different types of bodies of water, the tactics of catching a predator from an anchored boat and drifting, as well as safety issues that are often ignored. You will learn how to properly equip a cockpit for convenience, which tackles are most effective when catching from aboard, and how to avoid typical mistakes that can cost an expensive catch or even safety.
Choosing the Best PVC Boat for Fishing
The foundation of successful fishing is a well-chosen boat. outboardLow-pressure inflatable floors (LDPBs) provide excellent comfort and stability on standing water, allowing you to navigate the boat while catching the trophy without losing balance. However, large reservoirs with frequent waves prefer boats with a floorboard aluminum or plywood bottom, as they are better at cutting the wave and have a more predictable course.
The size of the boat is dictated by the number of crew and the necessary reserve of space for tackle. The optimal option for single fishing or fishing is considered to be a length of 320 to 360 cm. Smaller dimensions can be cramped when installing a sonar, anchor device and a cage, and large boats become heavy in transportation and require a more powerful and therefore more voracious engine. High pressure cylinders provide additional buoyancy and protection from splashes, which is important when fishing in windy weather.
When choosing a material, you should focus on a five-layer reinforced PVC fabric with a density of at least 750 g / sq.m. Thinner materials can quickly become unusable from constant contact with hooks, loaders and bottom relief when landing. Also pay attention to the design of the translator: it must be rigidly fixed and withstand the thrust of the motor without deformation, especially if you plan to use motors with a capacity of more than 5 hp.
Selection of motor group and attachment equipment
The engine for a fishing boat should have a power reserve, but not be excessive, so as not to overload the transient and not waste fuel. For boats with a length of 320-360 cm, the golden mean is the engines with a capacity of 5-9.9 hp Two-stroke models are easier and easier to maintain, which is important when transported frequently in the trunk of a passenger car. Four-stroke analogues are quieter, more economical and environmentally friendly, but their weight can significantly reduce the useful load of the boat, especially in windy weather.
The most important element of the equipment is the anchor system. For fishing from a pvc motorized boat, the use of a classic cat anchor is often ineffective due to its low weight and poor grip on the current. The optimal solution is the Danforth anchor or plow, which weighs about 1/10 of the displacement of the boat. Anchor falla It must be synthetic, not sinking and have a length exceeding the maximum depth of the reservoir at the fishing site by 3-4 times.
Protecting the boat from damage, including special linings, Kevlar ribbon on the bottom or removable shields (liquid) will significantly extend the life of your boat. When installing a sonar and navigator, use rotary brackets that allow you to quickly change the angle of view or remove sensors when moving. The correct organization of space in the cockpit allows you to keep everything at hand without getting up.
☑️ Checking before getting on the water
Tactics of catching predators from a boat
Boat Fishing opens up access to tactics drifting (drift fishing) and trolling that are not accessible to the shoreline. Drift allows you to catch large areas of buckets or underwater brows by baiting along the edge of vegetation. To do this, the boat is turned nose or stern against the wind and let the anchor be released on a short phalt or use a sail anchor (dreck anchor) to slow down demolition. This is the ideal method for finding an active pike or perch.
PVC trolling requires special care because of the limited length of the craft. Wobble wiring on long vacations (30-50 meters) is possible, but requires a perfect balance of loading the boat so as not to burrow into the wave. The more safe and effective "fan" method is when the boat moves slowly above the relief, and anglers change the horizons of wiring using downriggers or simply changing the speed of the engine. Deep-sea wobblers And jig baits, they do the best.
When fishing in a plumb (vertical jig), it is critical to precisely fix the boat above the point. This is where the ability to use a sonar to constantly monitor the position of the vessel relative to the bottom relief comes to the fore. The slightest demolition by the wind can carry the bait out of the cool zone, so the use of two anchors (in the nose and stern) or anchor stretch marks is often justified, a tactic that is indispensable for catching winter perch or perch on the first ice and the last ice, when the fish are in local flocks.
⚠️ Attention: When fishing in drift in a snag, always carry a knife or axe at hand for emergency cutting of the anchor shaft. Getting stuck on the anchor shaft in the middle of the fairway or on a strong current is a deadly situation.
Organization of the workplace in the cockpit
The comfort of the fisherman directly affects concentration and therefore the catch. In the tight space of an inflatable boat, every centimeter counts. For the organization of storage of gear, seals or special organizer bags that are attached to the board or placed under the seats are ideal. Fixing system It should be designed to prevent objects from falling overboard or to the bottom of the boat, from which they are difficult to reach without getting up.
Seats need to be comfortable, but also functional. Hard cans often give way to rigid inflatable seats or specialized fishing seats that attach to stringers. The ability to adjust the height of the seat allows you to change the angle of view and ease of cut-off. For standing fishing, many install platform platforms that increase the usable area and protect the bottom from punctures.
Electrification of boats is an important aspect of modern equipment. Installing the battery in a sealed box is essential for safety and conservation of charge. It can power the sonar, the navigator, LED lighting and the electric motor. The wiring should be carefully laid, fixing it with clamps or tape to prevent overlap with the motor or anchor shaft. All connections should be protected from moisture and oxidation.
The Secrets of Ergonomics
Place a box of baits and baits on the side you normally cut the fish from, which will save precious seconds while catching the trophy and reduce the risk of descent.
Comparison of boat specifications for different conditions
The choice of a particular boat model depends on the operating conditions, and below is a table that helps to determine the type of vessel depending on the reservoir and fishing style.
| Type of pond | Recommended length | Type of bottom | Engine power |
|---|---|---|---|
| Small rivers, overgrown lakes | 280-320 cm | NDMA | 2.5 - 5 hp |
| Large reservoirs, Ladoga | 340-380 cm | Paiola (aluminum) | 9.9 - 15 hp |
| River Delta, sea fishing | 360-420 cm | NDNDM enhanced / Paiola | 15-30 hp. |
| Trolling in deep places | 380 cm | Hard (aluminum) | 20+bhp |
As you can see from the table, there is no universal solution: for sea fishing on small rivers, a heavy boat with paioles will become a burden that you have to collect and disassemble for a long time, while going out on a large water on a three-meter pot can be dangerous if the weather changes dramatically. A critical safety parameter is the height of the board and the presence of an inflatable keelson, which improves the course stability.
Passport capacity is often quoted as 75 kg per person, but when fully loaded with gear, fuel and catch, the real payload decreases. Always leave a buoyancy margin. An overloaded boat becomes roller, reacts slowly to steering, and has a minimal free-board margin, which increases the risk of being overwhelmed by a wave.
Safety and rules of conduct in the water
Fishing from a motorized PVC boat is not only a pleasure, it's also a responsibility. The basic rule is that a life jacket should be worn, not in a junk. If you tip over or fall overboard, there will be no time to find it. Even if you swim well, cold water and heavy clothing can quickly negate all physical effort. The vest must be certified and sizeable.
Controlling weather forecast is the responsibility of every captain. Open water winds increase and waves grow faster than they think from shore. If you see an approaching storm or feel the wind intensify, immediately move to shore. Inflatable boats have high sailing speed, and the side wind can quickly turn them across the wave, which can tip over, move with a lag or nose to the wave, but never turn to it with a stern on the crest.
The safety of the engine is also important, and check the condition of the fuel hoses, the absence of leaks in the lower unit and the reliability of the diewood bracket before each season. safety-line (checks) on a tiller or vomit ring, absolutely. If a person falls overboard, the engine must stop immediately so that the screw does not cause injury. Always have a scoop, PVC repair kit and a spare anchor in the boat.
Take a powerful whistle with you on a fishing trip. In windy weather, the scream drowns in the noise of the waves and the motor, and the whistle is heard much further and is better identified as an SOS signal.
⚠️ Attention: Never tie an anchor tile to a boat without the possibility of rapid firing or circumcision. Anchoring a snag on a strong current can cause the boat to tip over instantly or pull it under water.
Seasonal features and equipment storage
Fishing in different seasons dictates its requirements for equipment and boat. In summer, the main problem is the heat and overheating of PVC material. In the sun, the pressure in the cylinders increases, so you need to periodically vent excess air, especially if the boat is on the water for a long time. Also in summer, the risk of punctures from sharp reeds and shells is high, so protecting the bottom is mandatory.
Fall fishing from a motorized PVC boat requires protection from cold and moisture. Rainy weather and low temperatures make it uncomfortable to stay in open water without raincoats and thermal underwear. Two-stroke motor oil becomes more viscous, requiring fine tuning of the carburetor or the use of special oils for low temperatures. During this period, fogs are frequent, so the navigator and compass become indispensable assistants.
Proper storage of the boat in winter will prolong its life, the boat must be thoroughly washed, dried and treated with talc before packaging, it is better to store PVC products in a straightened form or in a freely rolled state (not in a tight twist) at a temperature above -10 ° C. The motor should be preserved: drain fuel from the carburetor, treat the inner cavities with anticor and store them in a vertical position.
The key to long-term PVC boats is cleanliness and proper storage, and the mud and moisture left in the folds destroy the material faster than active operation.
What length of boat to choose for fishing together with a 9.9 hp engine?
The optimal choice for two adult anglers with a full set of equipment and a 9.9 hp engine will be a boat with a length of 340-360 cm This length will ensure sufficient load capacity, resistance to the wave and comfortable accommodation in the cockpit Boats shorter than 320 cm will be overloaded, which will reduce safety and driving performance.
Do I need to register a PVC boat with an engine in GIMS?
Registration with GIMS is mandatory if the weight of the out-of-date vessel (boat + engine + equipment) exceeds 200 kg, or if the installed engine exceeds 8 kW (about 10.8 hp). However, the rules may change, and the presence of a motor more powerful than 5 hp often requires the right to operate a small vessel.
What is the danger of using a chainsaw on a PVC boat?
Using a chainsaw or any open fire on a PVC boat is deadly. Gasoline vapors are heavier than air and accumulate at low points of the cockpit and floorboards. A spark from a saw or a fallen corner can ignite the vapors, causing an explosion or fire that will instantly melt the cylinders. Use battery-powered electric fillet knives to cut the fish.