Flight hunting requires not only patience and good location, but also reliable camouflage, especially when you are in open water. A squirm for a PVC boat It becomes a key piece of gear that allows you to go unnoticed by a careful bird at a distance of shot. Unlike stationary shelters on the ground, the floating version must have specific specifications of stability and windiness, so as not to overturn from a gust of wind or a sharp movement of the hunter.
The modern market offers many ready-made solutions, from simple frame structures to complex inflatable systems, but many fishermen and hunters prefer to create shelters DIY. delay A well-assembled shelter not only hides the silhouette of the shooter, but also protects against cold wind and splashes, which is critical in the fall.
In this article, we will discuss in detail all aspects of the choice of materials, design and methods of attachment of camouflage systems. material The best way to frame a boat is to calculate the center of gravity correctly and what mistakes beginners most often make when equipping a floating shelter. A competent approach to this issue will turn your boat into an effective tool for trophy mining.
Design features and types of shelters
All existing designs of scrubbers for inflatable boats can be divided into several main types, each of which has its advantages and disadvantages. Frame models They are most common because of their rigidity and the ability to securely attach the cloaking net, they are assembled from light metal or plastic and mounted on special brackets embedded in the sides or cylinders.
The second popular option is flat-sweetenThese are air-filled, sealed chambers, and their main advantage is that they are minimally weighted and compact when deflated, which is convenient for transport in the trunk of a car, but they are more vulnerable to mechanical damage from sharp branches or fishing hooks.
The third type is hybrid solutions, where the lightweight frame is wrapped in a cloth or a grid to create a cavity. sailability The high-sided skirt can be a bad joke in a strong side wind, so the shape of the dome or roof should be streamlined. Also consider the angle of view: too high a shelter limits the shooting sector.
⚠️ Warning: Using structures too tall or heavy on a narrow PVC boat can shift the center of gravity and cause the vessel to tip over. Always test the stability of the scroal in shallow water before going to depth.
Materials for making DIY
If you decide to make boat-short So, the choice of materials will be the first and most important step, and the framework is most often made from polypropylene pipes, aluminum profiles, or fiberglass rods, which are non-rusting, easy to process, and lightweight, which is critical for small swimmers.
For skinning and camouflage traditionally used cloaking net, which can be purchased in specialized stores or make yourself from fabric tapes. Camouflage fabric It should be appropriate for the area where the hunting is planned: yellow-brown colors are suitable for the cane, and gray-green shades are suitable for open water. It is important that the material dries quickly and does not absorb water, otherwise the weight of the shelter will constantly increase.
Fastening elements require special attention. All metal parts in contact with water or moist air must be made of stainless steel or have a high-quality corrosion-resistant coating. Conventional steel will quickly rust, oxides will damage the boat cylinders, and rust will spoil the appearance and strength of the structure.
Use UV-protected plastic clamps to attach the net to the frame, which do not rust, are easily replaced in the field, and do not scratch the PVC fabric of the boat.
As an additional insulation and noise insulation, some hunters use foamed polyethylene or a thin foam covered with a wet cloth, which reduces the noise level when the weapon touches the side and makes staying in shelter more comfortable on frosty mornings.
Requirements and installation methods for cylinders
The safety and reliability of the mount is something that you can't save on when you install the scrub. There are several proven ways to fix the structure on the device. flyboard The most gentle method is to use soft slings with friction buckles that cover cylinders and are fixed to the bottom or transom.
A more rigid option involves the installation of special brackets or "ears" of durable tape, which are glued to the cylinders on a two-component glue for PVC. This method requires accuracy and degreasing the surface, but provides a very reliable fixation even with strong shaking on the wave.
☑️ Checking the fastening of the scrub
Frame systems often use the method of inserting racks into special pockets sewn to the protective cover of the boat, if any is provided by the manufacturer. If the boat is "naked", then any rigid elements must have soft linings of foam or rubber in the areas of contact with the sides.
| Type of attachment | Difficulty of installation | Risk to the boat | Reliability |
|---|---|---|---|
| Buckle belts | Low. | Minimum | Medium |
| Sticked hinges | High. | Medium (during dismantling) | High. |
| Pockets in a case | Medium | Missing. | High. |
| Hard brackets | High. | High (unplated) | Maximum |
It's important to spread the load evenly. Point pressure of the belt on the inflated balloon can cause the tissue to deform or even rupture when you exert a lot of tension. Use wide tapes to distribute the pressure.
Masking and adaptation under the medium
The effectiveness of the scrub is directly dependent on the quality of the cloaking, and just putting a net on the frame is not enough, you need to create a volume and texture that mimics the surrounding vegetation. Natural materialsSuch as dry reeds, reeds or shrub branches work best as they have a natural color and shape.
But there's a downside to straight hair, which is that it wilts quickly and loses its appeal to the bird, so experienced hunters use a combination of a base made from an artificial grid with sewn fabric tapes, and fresh branches are inserted on top just before the hunt begins, which allows you to quickly update the appearance of the shelter.
The Secret to Perfect Cloaking
Use the "teared silhouette" principle, and the smooth geometric lines of the scrawl are visible from afar, and try to make the edges of the shelter uneven by adding bundles of grass of different lengths to blur the outline of the man and the boat.
The color scheme should be in line with the season, with light green and yellow in spring, rich green in summer, and brown-brown in autumn, and a grey or bluish netting to mimic the ripples of water and the sky in open water, where vegetation is scarce.
Remember the smell. New synthetic materials can have a specific chemical smell that scares away the careful bird, and before the first use of screeches, it is advisable to keep outdoors or treat with special sprays-anelizers.
Safety and sustainability on water
Installing any additional equipment on the PVC boat changes its seaworthiness. Sailing The high-end structure catches the wind like a sail, which can lead to a rapid demolition of the boat from the point or, worse, to roll and draw water by the sides.
To compensate for sailing, it is recommended to use an anchor system. Even a light cat anchor or a bag of stones on a long phalt will help keep the boat nose against the wind, reducing the area of resistance. It is also important to correctly distribute the weight of the hunter and equipment inside.
⚠️ Warning: Never get up to full height inside a screech on water unnecessarily. A sharp shift in the center of gravity combined with wind load on a high structure is a common cause of upheaval.
If you use a motorized boat, make sure that the scrub does not block access to the transom and does not interfere with the control of the rhumel. When folded, the structure should be compactly stacked without taking up all the useful space of the cockpit.
Safety on the water is paramount: if the weather worsens or a strong wave rises, it is better to remove or fold the screeching to reduce the risk of tipping over.
Care, storage and durability
Proper care of the scrub will prolong its life and maintain its camouflage properties. After every hunt, especially if it was wet or raining, the structure must be dried. Wet fabric or mesh when stored in the bag will quickly be covered with mold, which destroys the fibers.
Metallic elements The frame should be wiped dry with rags and periodically lubricated with silicone lubricant, even if they are made of stainless steel. Salt water is aggressive to any metals, and prevention here will not be superfluous.
It is better to store the scrub in a straightened form or rolled up in large loose rolls to avoid cracks and cracks on plastic tubes or fabric. The optimal place is a dry, ventilated room, protected from direct sunlight, since ultraviolet destroys most polymers.
Before the start of next season, be sure to have an audit of all the mounts and seams. Small repairs made at home are better than large-scale water problems. Stock up on a PVC repair kit and cloth glue.
Frequently Asked Questions (FAQ)
Can I use a motorized boat?
Yes, you can, but the design must be foldable or foldable so that you don't interfere with the control of the motor and don't block access to the transom, and it's also important to take into account the wind load when driving for an outboard motor.
Which material is better: plastic or aluminum?
Plastic (PDF, polypropylene) is cheaper and does not conduct heat, which is important in the cold, but it is more fragile in the cold. Aluminum is stronger and lighter, but more expensive and colder to the touch. The choice depends on the budget and operating conditions.
Do I need to register a boat with a screech in GIMS?
The scrub is not a attachment requiring registration unless it increases the load capacity or engine power, but the total weight of the gear must not exceed the passport restrictions of the boat.
How do you make a screech noiseless?
Use soft tissue joints instead of metal fasteners that can ring, the frame can be wrapped with tape or cloth, and avoid using hard plastic that cracks in the cold.
How much does a standard screed weigh?
The weight of finished models varies from 3 to 8 kg depending on size and materials. Homemade polypropylene pipe structures are usually lighter than factory metal counterparts.