Fishing bream from a boat on the current is an art where every detail of the tackle affects the result. Unlike standing water, it requires a special tactic: the right choice. tooling, literate filing bait Many anglers lose their catch because of the wrong weight of the feeder, too thin line or improper installation. 5 most effective tackles for catching bream on the flow from the boat, as well as the nuances of their use in different conditions.

Why from a boat? Because it gives you access to the most promising points. deep piles, brows and places with a reverse flowAnd without the right gear, even a skilled angler would be left without a catch, and we analyzed forum reports, we interviewed experts, and we put the tooling to the test to get you the best possible guide.

1. Feeder tooling with feeder: classic for the flow

The feeder on the flow is not just a rod with a feeder, but a whole system where each element has to work together. bait It's a very high flow of water, and it's a feeder that's weighing from the water. 80 to 150gThe bream is often at the bottom, so it's important that the tooling is as natural as possible.

Optimal installation. "paternoster." or "inline"The first one gives more freedom to the bait, the second one holds the bottom better. 0.12-0.18 mm (for sensitivity) + fluorocarbon leash 0.14-0.20 mm Hooks are waxed or shoulder bladed, size #10–#14 according to the international classification.

  • 🎣 The rod: feeder 60-120 glength 3.3–3.9 m (for example, Daiwa Black Widow or Shimano Catana)
  • 🧲 Bread: open type (e.g., open type) Method Feeder) or lattice for viscous soil
  • 🐟 Nozzle: worm bundle, corn, corn bundle + foam ball to lift bait above the bottom
  • 🌊 Tactics: upstream casting followed by slow descent of the feeder to the fishing point
⚠️ Attention: If the current is too strong (more than that). 1.5 m/s), use feeders with additional stabilizer loads or go to the bottom with a load of bullets. Otherwise, the bait will be washed away faster than the bream has time to come.
📊 Which feeder do you use more often on the current?
Open (Method Feeder)
Closed (with grid)
spring
Homemade
other

Donck with a load of bullets: for super-strong current

When the speed of the flow exceeds 1.2–1.5 m/sAnd feeder feeders become inefficient, they just blow them away. bullet-loaded donkey weight 100 to 300gThis gear allows you to accurately deliver the bait to a perspective point and keep it there despite turbulent flows.

Features of installation:

  1. The main line is the wicker 0.20-0.30 mm (for example, Power Pro or Sunline).
  2. The cargo-"bullet" is attached through a vertebral line to the main line, and a leash (fluorocarbon) 0.16-0.22 mm) step aside on 20-30 cm.
  3. Hooks with long forearms (art.Owner 50117 or analogues) so that the nozzle plays in the flow of water.

Current speed The weight of the bullet Diameter of the line Recommended nozzle
0.8-1.2 m/s 100-150 g 0.20–0.25 mm Worm + foam
1.2–1.8 m/s 150-250g 0.25-0.30 mm Corn + wool
1.8+ m/s 250-300g 0.30–0.35 mm Boyles or bundles of worms

The key point is leashWeak currents are good enough. 15–20 cm, on the strong, up to 50 cmSo that the nozzle doesn't get loaded, and you can also use it. twister (for example, Tubing) to avoid line overlaps.

💡

If the bream pecks carefully, replace the metal cargo with lead with a rubber damper - this will reduce noise when falling to the bottom and increase the number of pecks.

3. Float fishing rod on the current: when the bream takes in the water

Many people think that floating gear is ineffective, but it's not. Breath often rises into the middle layers of water, especially in the warm months (May-September), and you can catch it on the float very successfully. loading and float-form.

The best option is:

  • 🎣 The rod: bologna 4-5 m (for example, Salmo Elite Tele Match)
  • 🪝 Float: load-bearing 3-8g (for example, Colmic Marea or Tronixpro X-Lite)
  • 🧵 Leska: monophile 0.14-0.18 mm (The squirrel is not desirable - it scares the bream in clear water)
  • 🐛 Nozzle: a moth, worm or small worm (for example, "leaf-leaf")

Fishing technique: the float must be loaded so that only the top of the antenna remains above the water. 45° upstreamAnd then the gear slowly descends, and the bream in the current often takes the bait when it's free-driving, so it's important to control the speed of the tooling.

⚠️ Attention: If the flow is uneven (with whirlpools), use a float with stabilizing or add to the line 1-2 fractions Or the gear will be blown away.

4. The nipple ("killick"): a secret weapon for deep dumps

Hazka or killick) This is a tackle that is rarely mentioned in open sources, but it is extremely effective in deep areas with strong currents. bottom-lineAnd the nipple is a load with a leash that lies on the bottom, and the nozzle is in the bottom. 5–15 cm above him.

How to make a nipple:

  1. The main line is the wicker 0.20–0.25 mm.
  2. Cargo: a lead “bullet” or flat weight 100-200g.
  3. The lead is fluorocarbon 0.16-0.20 mmlength 30-50 cm.
  4. Hook with long forearm (see below)Gamakatsu LS-2511F or analogues.

Advantages of the nipple over the feeder:

  • 🔹 Less resistance to the flow - the cargo lies at the bottom, does not carry.
  • 🔹 The nozzle is always in the bream feeding zone.
  • 🔹 We can catch on jack-up (fish bits, worm bundles)

How to avoid hooks when fishing on a nipple?

Use the load with chain-buckle or mount a leash through silicone bufferwhich is torn off by the snare, retaining the main tackle.

5. Sbirulino: Italian tackle for active bream

sbirulino It's a kind of float gear that came from Italy. floaterIt's a medium-sized, low-resistance fishing system, and it's ideal for bream fishing in the middle of the water when the fish are not at the bottom.

Set of tackle:

  • 🎣 The rod: light match or bologna (4-6 m).
  • 🪝 Float: with an elongated antenna (e.g., Colmic Sbirulino).
  • 🧵 Leska: monophile 0.12-0.16 mm (the slap doesn't fit!)
  • 🐟 Nozzle: A moth, a worm, or a small worm.

Fishing technique: casting is made cross-currentAnd then the gear slowly comes down, and the float has to go naturally, without jerking, and the bream on the sbirulino takes it confidently, so the prick usually looks like a sharp dive float.

Load the float so that only the tip of the antenna remains above the water | Check the nodes on the fishing line (use) clinch or palomar)| Apply flavouring on the leash (e.g. vanilla or garlic)| Prepare several options for nozzles (moth, worm, worm)

-->

Brush for bream on the current: how not to feed the fish in vain

It should be in the course of the bait. stickySo it doesn't flush out instantly.

  • 🌾 Base: 50% - crushed crackers or cookies, 30% - Brain off, 20% - ground peas.
  • 💧 Binding: pottery terracotta (for viscosity).
  • 🐛 Activator: chopped worm, worm or moth (10–15% of the total).
  • 🌿 Flavors: vanilla, garlic or anise (no more than 3-5 drops on 1 kg bait.

Methods of feeding bait:

  1. Bread: for feeder or donck - the mixture should be dense so as not to wash out for 5-10 minutes.
  2. Balls: If you are anchored, sculpt balls the size of a tennis ball and throw them at the catching point each time. 15-20 minutes.
  3. Liquid bait: for floating gear - a diluted mixture, which is poured into the water in small portions.

⚠️ Attention: If the bream does not respond to bait, try adding shell-shell or egg-powder This creates a cloud that attracts fish from long distances.
💡

In a strong current, the bait must be done on 20–30% It is more than water, and it is added to it. PVA glue For better form retention.

Tactics of catching bream from a boat on the current: 5 rules of success

Even the most perfect gear doesn't guarantee catch if you're not picking the right place or time. 5 key rules of the rule for effective fishing:

  1. Selection of the point: Look. backflow (behind snags, stilts or stones) or deep-dump c 4-7 mThe bream likes to stand on the border of fast and slow flow.
  2. Fishing time: The best watches. dawn and 2-3 hours before sunsetOn cloudy days, the pecks can be even all day.
  3. Weather: Optimally, light wind (2-4 m/s) and stable pressure. When there are sudden pressure drops, the bream stops feeding.
  4. Depth: In summer, the bream is more often on 3-5 mIt's going to fall 6-10 mUse the sonar to find the flock.
  5. Mobility: If there are no swellings during 30-40 minutesChange your seat or gear, and the bream on the stream rarely stays in one place for long.

Important nuance: during the bream often squirt You've got to take it a few times before you swallow it, so don't rush to cut it off at the first pull, wait. 2-3 secondsSo the fish can get on the hook.

FAQ: Frequent questions about catching bream on the current

🔹 What weight of the feeder to choose for the flow 1 m/s?

For flowing speed 1 m/s The optimal weight of the feeder. 80-100gIf the bottom is slurry, take a lattice feeder so it doesn't sink. On rocky ground, you'd better use open feeders like this. Method Feeder.

🔹 Can I catch a bream on the current without bait?

Theoretically, it is possible, but the chances of catching are reduced in the 3-5 timesThe bream on the stream is oriented towards the feed streams, and without bait, it may not notice your nozzle. babe (e.g., a small fish) or during the period of jock (before spawning or autumn).

🔹 What is the most sensitive gear for catching bream on the current?

Sensitivity leads the way. feeder 0.12-0.14 mm picker-rod (for example, Shimano TechniumIt is also highly sensitive. sbirulinoBut it requires experience in loading.

🔹 How to avoid fishing lines when fishing on a strong current?

Use this:

  • 🔸 Twisting agents (for example, Tubing or Anti-Tangle Sleeve)
  • 🔸 Rotary-bearing vertebrae (for example, Owner Hyper Wire)
  • 🔸 Soft rod tip class feeder Medium or Slow)

It helps too. line-wetting (especially the Monophile) water from the river.

🔹 Which boat is better to choose for catching bream on the current?

The best option is PVC-boat (for example, Bark 320K or Frigate 360It's stable, it's easy to maneuver and it allows you to anchor. It's good for big rivers (Volga, Don). motorboat (for example, Wings 140) to move quickly between points.