Capturing a trophy catfish from a swimming tool is not just luck, but the result of careful preparation and properly assembled. tackleUnlike coastal fishing, which often uses a squirt, fishing from a boat requires a more delicate but powerful approach, since you are directly above the predator's parking lot. Self-assembly of the kit allows you to save your budget and adapt the rod to the specific conditions of the reservoir and the weight of the proposed trophy.
Many beginners mistakenly believe that the giant needs only a thick line, but the key to success is the balance of the entire system. Drawing on the catfish yourself This is designed to take into account the jerk load, which can be several times the weight of the fish. In this article, we will discuss all the nuances of creating an effective tool for hunting for the mustachioed master of the rivers, which will allow you to feel confident in a fight even with specimens weighing under a quintet.
The first thing that starts with making an effective tackle is choosing the right rod. The long sticks used by the coasters are not required to catch from a boat, but the maneuverability and power are important. The optimal length of the form is from 1.8 to 2.4 meters, which allows you to work comfortably in the limited space of the boat and effectively catch the fish, preventing it from going under the boat. The rod test It should start from 100-150 grams and reach 300-400 grams, since the weight of the used goods and bait can be very impressive.
The ideal choice is specialized katakana rods orthose heavy dutyBudget options are often fiberglass models that are heavier than graphite but have high strength and forgive many errors in catching. The more expensive graphite forms are lighter and more sensitive, but require careful handling because they are afraid of being hit on the side of the boat and sharp catfish teeth. When choosing, pay attention to the throughput rings: they must be large in diameter and have a reliable attachment to withstand the enormous loads during jerks.
The fastening of the rod in the boat also plays a critical role. stand or holders rigidly fixed on the transom or sides, necessarily, since it is impossible to keep a powerful gear in your hands for hours. Catfish often swallows the bait lying on the bottom, so the free movement of the fishing line when pecking (byterunner or friction in a weakened state) is more important than sensitivity to small bumps. A properly installed rod should allow the angler to react quickly to a bite, but still be fixed reliably during the wait.
⚠️ Attention: Never tie a line or cord to the side of the boat without using a rod. The jerk of a large catfish can turn over a light boat or break the board, which will lead to a dangerous situation on the water.
The heart of your gear is the reel, and here savings are unacceptable. For som fishing from a boat, multiplier models or powerful non-inertial coils of size from 6000 to 10,000 according to the Shimano classification are ideal. Multiplier It is preferable because of its traction power and reliability, although it requires skill to throw. Easiness-free models are easier to use, but their mechanism may not withstand a long struggle with a heavy trophy if they are not professional class.
The most important parameter is gear-rate So what you need is a catfish, not a speed of exhaustion, but a force, and the optimal gear ratio is 3.5:1 to 5.0:1, and this allows you to slowly but surely lift the fish from the depths without overheating the machine or breaking your fingers with your handle, and the friction brake must be smooth, without jerking, and have a large area of brake discs to dissipate heat efficiently.
- 🎣 Coil type: Multiplier (marine or carp) or non-inertial size 8000-10000.
- 🔩 Material of the spools: Metal (aluminum or titanium), plastic can be cut with a braid under load.
- ⚙️ Reduction: Power, with a low gear ratio for maximum effort.
- 💧 Defense: The presence of high-quality sealing of bearings from water and dust is mandatory.
The choice of the basic working material is a matter of safety and reliability. line The cord is unmatched in strength and lack of extensibility, which is critical for the smooth mouth of catfish and the control of fish. The cord diameters vary from 0.40 mm to 0.60 mm depending on the size of the expected prey. The use of monophilic fishing line is justified only in rare cases where masking or cushioning of jerks is required, but it has the property of stretching, which prevents effective cutting at great depths.
When winding the cord on a spoole, you must leave the side 2-3 mm high. If you wind too much, the upper turns will spontaneously fly ("beard") when thrown or etching. If too little, friction will increase on the side of the spoole, and the range of throw (or etching) will fall. PowerPro, Sunline PE or specialized squirrel cords from Berkley They have proven themselves as reliable options, resistant to rubbing on the shell and stones.
And we must not forget that leashAlthough catfish don't have pike-like teeth, its grate (many small teeth in its mouth) can wipe even a thick wicker over long-term fishing, so using a fluorocarbon leash of 0.8-1.0 mm diameter or a special soft titanium leash 30-50 cm long is standard. Fluorocarbon is less visible in water and resistant to abrasion, making it the preferred choice for most anglers.
When you wind a new cord onto a multiplier coil, make sure you create tension, run the line through a dense fabric or put a coil with a fishing line on the floor, and hold the coil that you wind in your hand, creating an effort, which will prevent the upper turns from falling under the lower ones when you load.
The kit for catching catfish from a boat can vary depending on the conditions, but the classic installation includes a sliding loader, a stopper, a vertebra and a leash with a hook. The weight of the loader is selected by the force of the current and depth: from 40 grams on standing water to 150-200 grams on a strong current. The main task of the loader is to hold the bait at the fishing point, but not to lie dead weight if the catfish takes bait and swims against the current.
The hooks are single, forged, with a wide yawn and a long forearm, and the international classification of hook size starts at 1/0 and can go up to 10/0 or higher for giants. Offset hooks They are used less often because they are easier to slip bait or a large bundle of worms, and a reliable serif of the hard mouth of the catfish requires an open sting. The hooks must be made of high-strength steel so that they cannot be straightened.
Below is a table of correspondence of weight of the loader and force of flow for proper loading of the tackle:
| The force of the current | Depth of catch (m) | Weight of the loader (g) | Type of loader |
|---|---|---|---|
| Absent (standing water) | 3 - 6 | 40 - 60 | Olive, Drop. |
| Weak. | 4 - 8 | 60 - 80 | Olive, Spoon. |
| Average | 5 - 10 | 80 - 120 | Spoon, Flat. |
| Strong. | 6 - 12 | 120 - 200+ | Flat with ground-locks |
The secret of editing
Palomar or Uni. To tie the hook to the leash and the leash to the main line, use the Palomar or Uni knots. They retain up to 95% of the strength of the line and hold even slippery fluorocarbon securely. Avoid simple knots that cut the line at a break.
The process of assembling the gear requires care and consistency, first a sliding loader is put on the main line, then a stopper bead (so that the knot does not hit the vertebral), then a vertebral is tied. A leash with a hook is attached to the vertebral ear, which allows the soma to take bait without feeling the weight of the loader, which increases the number of bites realized.
When using bait or large bait (pieces of fish, frogs), it is important to properly place them on the hook so that they remain active and attractive longer. It is better to cling to the back or lip, avoiding damage to the spine. For worms, a bundle of 10-20 crawls stretched with a "stocking" or formed into a lump, completely hiding the hook, but leaving a sting free.
☑️ Assembling tackle
Boat fishing is very different from shore fishing, where you can precisely catch pits, dumps and entrances to the pools where the catfish stands, and when you anchor across the stream or on stretch marks, the angler lowers the gear vertically or with a little demolition. Fishing in the plumb It allows the lighter loaders to be used and the most careful bites to be felt, however, if the current is strong, the boat can turn around, so the use of two anchors (in the nose and stern) is often necessary for a stable position.
The catfish bite often looks like a confident pull or a series of powerful jerks. Don't rush the cut: the catfish should swallow the bait. After a characteristic blow, give the fish a few seconds, select a slack line and make a wide, sweeping cut. Rescuing It's not so much a work with your hands as with your body and your legs, with constant control of the tension of the cord. Don't let the catfish go into driftwood or under a boat, keep it afloat, gradually fatigue it.
⚠️ Attention: When catching a large catfish, do not twist the fishing line on your hand! This can cause serious injuries to your fingers or even loss of a limb when a sharp jerk of the fish. Always keep the rod in your hands or use a belt for catching.
Once you've been successfully captured, you have to keep the trophy, and if you're planning to let go of the fish or keep it alive until the end of the fishing, you need to be reliable. cockleA homemade cook made of metal cable or thick line with carabiners is the best solution. Industrial models often can not withstand the weight of large catfish or rust. The length of the cookan should be at least 1.5-2 meters so that the fish is in the water at a sufficient distance from the boat and does not beat against the side.
The process of killing or fixing the catfish requires composure. The large catfish has tremendous strength and mucus, which makes it very slippery. Use a special pickup (Lip Flu for large fish) or tight gloves. A wooden mallet (priest) strikes the area above the head (where the skull box) instantly deafens the fish, which is humane and safe for the angler.
- 🔨 Tool: Use a heavy object with a blunt end to stun.
- 🧤 Defense: Dense gloves or a catfish mouth gag will protect against thorns and teeth.
- ⚓ Fixing: The kukan should be tied to the transom of the boat, not lying inside.
- 🐟 Place: Keep the fish in the water, away from the propeller of the motor.
The main principle of catching catfish from a boat is to control the situation. You are in predator territory, so your gear should be safe, and your actions should be cold-blooded and calculating.
The hand-built gear has a huge advantage: you know exactly the limit of each knot and element. Unlike store kits, where you often save on trifles, your personalized kit is ready to fight the giant. Regularly check the condition of the fishing line for scuffs, especially after contact with a shell or snags, and change the consumables in a timely manner.
Remember, fishing from a boat requires safety, and having life jackets, a fast-moving anchor line, and a proper motor is a must. A catfish can take you to dangerous places, confuse an anchor shaft, or turn the boat over in a miscarriage, and respect for nature and caution on the water, ensure that fishing ends in pleasant memories, not an emergency.
Which line is better to choose: a wicker or a monophile?
The leader in catching catfish from a boat is the wicker cord, which is not stretched, which allows you to make effective cuts at depth and feel the fish. Monophile stretches to 20-30%, which extinguishes the jerks, but prevents you from controlling the tackle. The only advantage of the monophile is its stealth, but in the murky water of the catfish pits, this does not play a decisive role.
Do I need a byterunner for a som gear?
The Bytranner (free-line-dropping system) is very useful when fishing from a boat, especially if you use multiple tackles or get distracted. The catfish often takes the bait sharply and can drag the rod into the water if the friction is tightened. The Bytranner will allow the fish to freely reel the line at the first pull without fear of resistance while you take the fishing rod in your hands.
How often do you need to check the hooks?
The hooks on the som gear should be checked after every fishing and even after every major bite. A dull sting will not penetrate the predator's hard mouth, and the collection will be ensured.
Can I catch a catfish on spinning from a boat?
Yes, catfishing on spinning (trolling or jig) from boats is very popular. The same powerful rods and reels are used for this, but instead of passive donkey, active fish hunting is used using wobblers or large jig baits. However, classic bottom gear is often more catchy during periods of passivity of the fish.