Boat. Glass 44 One of the most popular models among outdoor water enthusiasts is this aluminum boat, produced by a Russian factory. OAO GlassIt's a trusted product that's based on the optimal combination of price, quality and functionality, unlike many budget counterparts. Glass 44 offers a durable body, convenient layout and the ability to install motors of various power - from 5 to 25 hp.
But before you buy, it's important to understand the nuances of what modifications exist, how to choose the right engine, what weaknesses the model has and how to fix them. specificationCompared to competitors, we will make recommendations on tuning and repairWe also answer the frequent questions of the owners. Glass 44 Or you are already a lucky owner – here you will find all the necessary information.
Technical specifications of the boat "Glass 44": dimensions, load capacity, material
The boat's hull is made of aluminum-magnesium alloy AMG5M 1.5-2 mm thick, which provides high strength at a relatively light weight, the bottom is reinforced with additional stiffness ribs, and the sides have a classic V-shaped keel angle. 12° - this is optimal for driving qualities on the wave and economy.
The main parameters of the model:
- 📏 Length: 4.4 m (hence the name 44)
- 📐 Width: 1.65 m (external), 1.2 m (transnational)
- ⚖️ Weight: 120-140 kg (depending on the configuration)
- 🚤 Maximum engine power: up to 25 hp (passport)
- 👥 Passenger capacity: 4-5 people
- 📦 Load capacity: 500 kg
Feature Glass 44 — universal transom under engines with a height of 381 mm (15 inches)This allows the installation of most outboard motors without modification, but the manufacturer recommends that the power limit be adhered to: up to 15 hp for quiet operation and up to 25 hp for advanced users (taking into account the gain of the transom).
| Parameter | Meaning | Note |
|---|---|---|
| Body thickness | 2 mm | Stringent ribs reinforced. |
| Thickness of the sides | 1.5 mm | Standard for class |
| Height of board | 55 cm | Provides good protection against splashes |
| Volume of cylinders | 2 x 120 l | Built-in fuel tanks |
⚠️ Attention: When installing a motor with a capacity of more than 15 hp, the transom must be strengthened with additional ribs or a metal plate, otherwise the body may deform under heavy loads.
Modifications of "Glass 44": what are the differences and which to choose
The plant offers several options for completeness Glass 44, which differ in layout, equipment and price.
- 🛥️ Standard: The basic version, with an open cockpit, two cans and a motorized throng, is ideal for fishing and short walks.
- 🏕️ Turbo: Complemented with a bow deck, battery drawer and reinforced transcrete, suitable for long hikes.
- 🎣 Fisherman: Equipped with folding seats, holders for fishing rods and an enlarged luggage compartment.
- ⛵ Cabin: A rare version with a small closed cabin (optional) is convenient for overnight stays on the water.
The most popular modification is Glass 44 Turbo.Because it offers a better balance between functionality and price, like the bow deck, which allows you to safely navigate the boat on the go, and the built-in battery drawer protects you from moisture. fishing-fishing It will be the best choice thanks to ergonomic seats and tackle holders.
When choosing, pay attention to weld-quality - official dealers should have them smooth, without inflows, and also check the equipment: the basic version often does not include seats, pump and oars, which increases the total cost.
Comparison of Glass 44 with analogues: Kazanka, Oka, Ob
There are several direct competitors in the market. Glass 44The main differences are in material, performance and price.
| Model | Length/Broadness | Max, engine power. | Weight. | Features |
|---|---|---|---|---|
| Glass 44 | 4.4 m/1.65 m | 25 hp | 120-140 kg | Aluminum-magnesium alloy, V-shaped bottom |
| Kazankah-5M | 4.9 m/1.7 m | 30 hp | 150 kg | More spacious but heavier |
| Oka-3 | 4.3 m/1.6 m | 20 hp | 110 kg | Lighter but less stable on the wave |
| Ob-430 | 4.3 m/1.6 m | 25 hp | 130 kg | Flat bottom, worse controlled at speed |
Glass 44 win Okey-3 and Obi-430 It's because it's more stable on the wave, because it's a V-shaped bottom. Kazankoy-5M It's smaller and lighter, which makes it easier to transport, but if you want a boat for a big company (5+ people), you can't afford to go anywhere. Kazanka It's preferable.
⚠️ Attention: In testing Glass 44 motorized Yamaha 25 hp The maximum speed was recorded.45 km/hwhen fully loaded. Obi-430 with the same engine, the speed did not exceed38 km/hIt's because of the less streamlined body.
Which engine to choose for Glass 44: gasoline or electric?
The choice of motor depends on the purpose of operation. electric motor (for example, Minn Kota Endura C2 55), which is silent and does not require registration, and for long hikes and high-speed walks, it is better to choose petrol-engine 15-25 hp.
Recommended petrol engines:
- ⛽ Tohatsu MFS 15 A reliable and cost-effective option for beginners.
- ⛽ Mercury F 20 ELPT It is optimal for the family, develops speed to
40 km/h. - ⛽ Yamaha FMHS 25 maximum power for the Glass 44But it requires a transom.
When the engine is powered 20+bhp necessary:
Strengthen the transom with a metal plate 3-4 mm thick |
Check the fastening of the lower unit - a gap of no more than 2 mm|
Set additional stiff ribs at the bottom |
Control the balance of the boat (no nose should rise)
-->
Electric motors are suitable for quiet hunting or fishing, but have a limited range. Minn Kota 55 at full capacity discharges the battery 100 Ahh in 2-3 hours.
If you plan to use an electric motor, take a battery with a capacity of at least 120 Ahh And it's a charge controller, and it's going to increase the water life to 5 to 6 hours in economical mode.
Tuning and modification of "Glass 44": how to improve the boat yourself
Even the basic version. Glass 44 It leaves room for modernization, and here are the most useful improvements.
- Transcension boost. For motors over 15 hp, an additional 4 mm thick aluminum plate is welded, which prevents “fatigue” of the metal under prolonged loads.
- Installation of attachments.
List of useful equipment
- Echoer. Garmin Striker 4 with a transom-mounted mount.
- Pump. Rule 500 GPH for pumping water.
- LED spotlight. OceanLED X2 night fishing.
- The rod holders. Scotty 241 (4 pcs).
- Seat upgrades. Standard banks are replaced by rotating chairs Moeller Angler Or soft seats with cushioning.
- Painting and anti-corrosion treatment. After 2-3 seasons, it is recommended to update the protective coating (for example, the protective coating is not recommended). Alteco Boat).
One of the most effective tunings, stabilisationIt improves wave handling and reduces wind drift. Glass 44 A keel of 1.5-2 m in length is suitable from aluminum or stainless steel.
The modification of the boat must comply with the rules of GIMS, for example, the installation of a cabin or change of passenger capacity requires the re-registration of the vessel.
Frequent problems and repairs "Glass 44": what breaks and how to fix
Despite the reliability, the Glass 44 There are typical "diseases" that appear after several seasons of operation:
- 🔧 Leak in the welds. It's caused by vibration or corrosion, solution: clean the seam, treat it. Cold Weld Or digest.
- 🔧 Deformation of the translance. Most often, with 20+ hp motors, without gain, the solution is to weld an extra plate.
- 🔧 Body corrosion. It comes from wet storage, solution: sandblasting + painting. International Intergard 263.
- 🔧 Problems with cylinders. Leaking in fuel tanks because of rust, solution: Replacement with plastic or aluminum cylinders.
For the prevention of corrosion, it is recommended:
- After each release, wash the boat with fresh water.
- Store in a dry ventilated room or under a cover.
- Once a season to treat the bottom with an anticorrosive composition (for example, Loctite 7860).
⚠️ Attention: If the boat is kept outdoors in winter, be sure to drain water from the cylinders and treat the inner surfaces. WD-40 SpecialistIce plugs can break the seams!
Registration of Glass 44 in GIMS: whether and how to issue
According to the current legislation, boats up to 5 m long and up to 10.88 hp (8 kW) engine power not registeredHowever, if you install a more powerful engine (for example, 15 or 25 hp), then the boat must be registered with the GIMS.
Registration will require:
- 📄 boat owner's passport.
- 📄 Passport for the boat (is issued upon purchase).
- 📄 Passport to the engine.
- 📄 Receipt of payment of the state duty (2 000 RUB in 2026).
- 📄 Insurance policy (mandatory for motors over 5 hp).
The procedure takes 5-10 working days. After registration, you will receive boat registration certificate and plateWithout registration, the operation of a boat with an engine over 10.88 hp is punishable by a fine of up to 15,000 RUB.
From 2023, new rules have been introduced: if a boat is used for commercial purposes (for example, for fishing tourism), it is subject to registration regardless of the power of the engine.
FAQ: answers to frequent questions about Glass 44
❓ Can I install a 30 hp engine on Glass 44?
Officially, the maximum power is 25 hp Installation of the engine 30 hp is possible, but requires serious strengthening of the translat (welding of an additional frame) and can lead to loss of warranty.
❓ How many people can take on board the Glass 44?
Passports have 4 people (maximum load 500 kg), but in practice, 3 adults and tackle are comfortably accommodated. When fully loaded (5 people), the boat loses speed and stability.
❓ Which trailer is suitable for transportation?
The best option is a trailer with a load capacity of 750 kg and a platform length of at least 5 m. MISA 8205, CMP 8204 or Al-Ko 1313Make sure you check for a winch and secure mounts!
❓ How often should the boat be serviced?
Minimum TR:
- After each exit, wash with fresh water.
- Once a season - checking welds and anticory treatment.
- Every 2 years, replace the anodes (if any).
- Once every 3 years – a full painting of the bottom.
❓ Where is it better to buy Glass 44: from the dealer or from the hands?
The new boat should only be taken from dealership This guarantees the original quality of the metal and welding, buying from hand is risky: often sell boats after accidents or with hidden corrosion.
- The thickness of the bottom (should be 2 mm).
- The condition of the welds (are there cracks)
- A passport and service book.
Average new price Glass 44 in 2026, 280 000–350 000 ₽ depending on the configuration.