Comfortable fishing or family picnics on the water are not possible without convenient organization of space inside the boat. Many owners of inflatable vessels face the problem of not having a flat surface on which to put gear, drinks or food. Standard solutions from manufacturers are often cumbersome or do not fit the specific geometry of the boat. PVC-boat-table It is an ideal option for those who appreciate practicality and minimalism.
This design allows you to transform a simple boat into a full-fledged camping center in a matter of minutes without disturbing the tightness of the cylinders by drilling holes. The liktros is a strong cable that runs inside the board, which serves as an excellent basis for attaching various elements. DIY tuningIn this article, we will discuss in detail all the nuances of creating a reliable table that will withstand the load and last for many years.
The main advantage of this solution is that it's versatile and reversible, so you don't have to ruin expensive property, and if you need it, you can easily dismantle the table, making room for active fishing or overnight stays, and a properly designed fastening system will provide stability even on a small wavelength. Let's look at what materials will be required to implement this project.
⚠️ Warning: Before any upgrade work begins, make sure the boat is in a deflated or half-blown state to avoid accidental damage to the cylinder by sharp tools or mounting details.
Selection of materials and preparation of tools
The first step to creating a quality product is a competent selection of materials, the base of the table should be lightweight but strong, and resistant to moisture and ultraviolet light. Most often, craftsmen choose moisture-resistant plywood 10 to 15 mm thick or composite materials such as ACP Plywood must be treated with yacht lacquer or pasted with self-adhesive film to protect against water.
The lyctros mounting system will require special clamps or clamps, you can use ready-made solutions from boat equipment manufacturers or make them yourself from aluminum strips, aluminum is preferable to steel, because it does not rust and has less weight. bolts, nuts and washers stainless steel, so that corrosion does not spoil the appearance and functionality of the product through the season.
As for tools, a basic set of home craftsmen will be enough. You'll need an electric jigsaw to cut a countertop, a drill with a set of metal and wood drills, and edge-handling files. Don't forget the tape measure and a marker for accurate marking. Measurement accuracy is critical here, because the lyctros has a certain trajectory, and a couple of centimeters shift can make installation impossible.
Use FFS plywood, as it has increased moisture resistance compared to conventional FC, which is critical for water use.
Designing table design
The design of the drawing is a step that cannot be ignored. The table must fit harmoniously into the cockpit of the boat without interfering with the oars or the engine. The standard width of the countertop usually varies from 40 to 60 cm, and the length depends on the distance between the sides at the installation site. It is important to provide cutouts under the seats or the trenchboard if the table is planned to be placed across.
The design of the legs or support pillars should be rigid. If you make a folding version, you will need to have a stiffness. loop-up For stationary lyctross, there are often two vertical struts that are rigidly attached to the ends of the countertop, and the bottom of the pillars will cover the side through the lyctross cable, and the height of the table is calculated based on the comfort of the seated person, usually 60-70 cm from the floor of the boat.
Pay special attention to the weight of the structure. A table that is too heavy can disrupt the structure. centre-up And it's also a way to reduce stability, which is dangerous on water, because lightweight aluminum profiles or large-diameter PVC pipes can be great legs, and in some cases, they use telescopic racks to adjust height, but they require a more complex fixation mechanism on the lyctros.
| Materials | Advantages | Deficiencies | Weight (approximate) |
|---|---|---|---|
| Plywood FF 12 mm | Cheap, availability, ease of processing | It requires careful protection from water. | Medium. |
| Aluminum sheet 3 mm | It's not rusting, very strong, lightweight. | High price, difficult to handle at home | Low. |
| Plastic (PVC 10 mm) | Absolute moisture resistance, does not rot | May be bending under load | Low. |
Liktros fastening technology
The most critical thing is to implement the mounting assembly, and the lyctross is a cable that's sewn into a sleeve around the perimeter of the balloon, and the challenge is to grab onto that cable without damaging the sleeve or cutting the threads. clamp-clam They're going to be around the lyctross and they're going to bolt together, and they're going to be a fulcrum.
The process of mounting begins with measuring the diameter of the cylinder in a compressed state (when the boat is pumped), a metal strip 30-40 mm wide and 2-3 mm thick is bent along the shape of the side. In places of contact with PVC fabric, you need to lay a soft gasket of rubber or dense fabric so that the metal does not rub the material when the boat is moving on the wave. safety your boat.
Then the clamps drill holes for fasteners that will hold the vertical pillars of the table. The struts can be made of a profile pipe or a wooden bar treated with an antiseptic. The clamping and the rack must be rigid, without backlashes. Sometimes the "sandwich" method is used, when the rack is clamped between two metal plates covering the board.
The secret of secure fastening
To increase friction and prevent the clamping from slipping down, a strip of car rubber or abrasive skin (grain to metal, smooth side to PVC) can be glued to the inner surface of the metal bracket.
Step-by-step assembly instructions
Start by preparing the countertop. Saw the workpiece to your size, carefully skin the edges, and drill the rig attachment holes. If you use plywood, apply a few layers of varnish or cover the surface with a protective film. Let the coating dry completely before assembly so that the smell and stickiness don't interfere with the work.
Next, make the support racks. If they're pipes, cut them into size. If you have a wooden timber, work it out. If you have a wooden timber, you have to fix the racks on the countertop. If you're removable, you'd better use bolts that you can unwind quickly. Make sure the racks are strictly perpendicular to the plane of the table, otherwise the structure will stagger.
Now, put the bottom mounts (homoths) on the boat cylinders. Put the boat on, pump to working pressure. Try on the clamps on the lyctross with protective pads. Tighten the bolts moderately so as not to deform the cylinder, but also to ensure a reliable grip. After that, install the assembled table with legs in the prepared clamps and fix it.
☑️ Checklist assembly
⚠️ Warning: Never tighten the clamping bolts "to the point" on a pumped boat without rubber pads. Excessive metal pressure can damage the structure of PVC fabric.
Improvement and improvement of functionality
Once the basic structure is ready, you can think about improving the usability of the table in the boat is a great base for placing additional equipment. sonar It would free the fisherman's hands and allow him to keep the device under control.
To protect you from the sun and rain, you often have a small tent or visor placed over your table, and you can attach it to the same vertical racks with extra brackets, and you can also use places to store little things like hooks, fishing lines, drinks, and you can pull a grid under the table, or you can attach plastic organizers.
If you plan to use the boat at night, it will not be superfluous to take care of the lighting of the work area. LED tape, pasted around the perimeter of the lower part of the countertop and powered by a sonar battery or a separate battery, will create a comfortable light that does not blind the eyes and does not scare the fish.
The addition of removable organizers and lighting turns a simple table into a multifunctional fishing center, increasing the efficiency of fishing.
Care and storage of products
Any product that is operated in harsh conditions requires maintenance. After each fishing, the table should be wiped with a dry cloth, removing moisture, sand and fish slime. If plywood was used, check the integrity of the lacquer coating. The chips that appear should be immediately dyed, otherwise moisture will penetrate into the material and stratify the material.
Metal elements, even if it is aluminum or stainless steel, it is advisable to rinse with fresh water, especially after use on salt water. Salt accelerates corrosion and can destroy threaded joints. Periodically check the tightening of bolts on the clamps, as they can weaken from vibration.
It is better to send the table to storage in a disassembled form or in a case, which will protect the surface from scratches and dust, and store the product in a dry room, in an unstretched state, to avoid deformation of the countertop under its own weight or the weight of other things.
Observing these simple rules will prolong your life. Table in PVC boat on lyctros It's not just furniture, it's an investment in comfort and pleasure on the water, and it's made yourself, and it's going to make you happy with reliability and convenience.
How to remove scratches from the lacquered surface?
Small scratches on lacquered plywood can be polished with soft cloth with a little polish for the car. Deep chips require cleaning and applying a new layer of yacht varnish.
Frequently Asked Questions (FAQ)
Will the lyctros mounting damage the boat itself if used for long periods of time?
If properly installed using soft pads (rubber, dense fabric) and moderate tightening of bolts, damage is excluded. The lictroline is strong enough to withstand the load from the light table. The main thing is to avoid sharp edges of metal at the point of contact with PVC.
What is the maximum weight that a table can bear?
The structure, which is mounted on two sides through lyctros, can easily withstand 15-20 kg of distributed load, enough for dishes, tackles and hand-holding, but you should not sit on the edge of the table with all the weight, because this will create a point load on the kink.
Can I put a table on a boat without lyctross?
Installation on a boat without a lyctross system is possible, but requires other solutions, such as attaching to banks (seats) or using inflatable supports. However, lyctross attachment is considered the most reliable and versatile for inflatable boats.
Do I need to remove the table while driving on the motor?
Yes, during active driving, especially at high speed or at high wave, the table is better dismantled or folded (if the structure is folding), this will reduce the sailing of the boat and eliminate the risk of breaking the table or injury to passengers during sharp braking.