The organization of space on a small boat is not just a matter of convenience, but a critical element of safety and efficiency of fishing or recreation. When every minute on the water can be crucial to catching a trophy, the ability to quickly reach the gear without getting up and without disturbing the balance of the boat becomes a priority. PVC-bagIt turns a normal inflatable balloon into a functional shelf.
Unlike stationary boxes, soft onboard organizers do not occupy valuable space inside the cockpit, leaving the fisherman's legs free. Modern models are made of materials that can withstand the aggressive effects of ultraviolet light, salt water and mechanical damage, making them durable satellites in all conditions.
Choosing the right model requires understanding the design of your boat and the specifics of the equipment used. Incorrectly selected mounting or material can lead to loss of equipment or even damage to the cylinder, so the issue of equipment should be approached with engineering precision and attention to detail.
Design features and types of onboard bags
The inflatable boat accessories market offers many variations in the design of onboard pockets, and they are all divided into several key types by installation method and functionality. pocket-bag It is a simple construction of waterproof fabric that is attached to the balloon and is designed to store small things such as spare hooks, fishing lines or mobile phone.
More complex models are often called side-tableThey have a rigid bottom or an internal insert of polyurethane foam, which allows them to fit spinning, sonar or even small gas burners, such structures are usually equipped with additional belts or rigid elements that prevent the contents from falling out when rolling.
- 🎒 Covered pockets: Simple models without a hard bottom, fastened on Velcro or belts, are ideal for lightweight things.
- 🪑 Hard-frame bags: have an internal plastic or plywood insert, hold the shape and allow you to put heavy objects.
- 🔋 Multifunctional organizers: They are equipped with rod mounts, pockets for cans and tool hinges.
The models with drainage holes deserve special attention. If you plan to keep wet fish or gear in your bag, water should flow out freely without accumulating inside your pocket. The lack of drainage will lead to the bag becoming an additional ballast compartment, which will negatively affect the impact on the water. stability boats.
⚠️ Attention: When using hard bottom bags, make sure all corners and rigid structural elements are rounded or protected by a soft material. Sharp edges can wipe or even puncture the PVC fabric of the balloon under prolonged friction or heavy load.
Manufacture materials and strength requirements
The durability of the onboard accessory depends on the quality of the materials used in its tailoring. The main requirement is the use of fabrics with polyurethane or polyvinyl chloride coating, which do not absorb moisture and are easy to wash. Oxford 600D orthose Oxford 900D/1200D with PU impregnation.
Seams on a quality bag must be treated with special tape or glued to prevent the filament from breaking loose and water from entering the lining layer. Cheap analogues often have open seams that, under the influence of sun and water, quickly lose strength, turning into rags after the first season of active use.
The fittings are just as important as the fabric: Plastic latches and lightning must be made of frost-resistant plastic or corrosion-resistant metal; conventional steel fittings will quickly rust from contact with water, and cheap plastic in the cold will become brittle and brittle.
When buying, pay attention to the back of the bag: it should be made of smooth, sliding material or have protective linings to minimize friction on the side of the boat when moving on water.
There are also bags made of the same material as the boat itself, PVC reinforced, which have maximum strength and welds, making them virtually invulnerable, but they are heavier and more expensive than textile counterparts. Oxford And reinforced PVC depends on what is more important to you: weight and compactness or absolute indestructibility.
Fixing systems: belts, Velcro straps and rigid installation
The safety of the bag is a safety issue. A lost gearbox in the middle of a pond is unpleasant, but it's even worse if the bag that's come off gets caught by the engine screw or gets tangled in the oars. There are three main ways of attaching, each with its own advantages and limitations.
The first and most common option is a system of belts with plastic fastecamiThe belts cover the cylinder and tighten, holding the bag upright, and it's important that the belts are adjustable, because the pressure in the cylinders can vary depending on the air temperature, and the bag will have to be tightened and loosened.
The second option is Velcro, which is often designed by boat manufacturers to provide Velcro reciprocating parts directly on the cylinders, and if your boat is not equipped with Velcro, you can stick the Velcro back onto the boat using a special glue for PVC, but this requires caution: the wrong glue can dissolve the top layer of the cylinder tissue.
The third way is to rigidly fasten through lyctrose If your boat is equipped with perimeter lyctross, there are bags with special locks that fit into the groove, which is the most reliable method that does not shift the bag, but it requires the appropriate design on the boat itself.
Instructions for installing bags on board yourself
Installation of the onboard organizer is a simple process, but requires a sequence of actions to ensure a guaranteed result. Before starting work, you need to determine the optimal placement so that the bag does not interfere with rowing, installing floorboards (flooring) or the legs of passengers.
You'll need a minimal set of tools to fit in: scissors, perhaps PVC glue (if you're planning to glue Velcro straps) and the bag itself. If you're using a belt mount, make sure the straps are long enough to cover your tank with a margin.
☑️ Checklist before installation
The installation process is as follows:
- Place the bag on the outside of the cylinder at the desired height.
- Stretches under the bottom of the boat or around the cylinder, depending on the design.
- Fast-up fasteners, but do not tighten them to the end at once.
- Evenly distribute the fabric of the bag, straighten the folds.
- Finally tighten the belts so that the bag sits tightly, but does not deform the balloon.
⚠️ Attention: Never place your bag on a balloon that is inflated to maximum pressure if you plan to leave the boat in the sun. When heated, the pressure inside will increase, and too tightly tight belts can damage the fabric of the balloon or the seams of the bag itself.
If you use glue to fix the Velcro reactive part, the surface of the balloon needs to be degreased, the glue is applied in a thin layer on both surfaces, then you should wait the time specified in the instructions (usually 10-15 minutes) to "flip", and only then connect the parts. Complete polymerization of the glue takes from 24 to 48 hours.
Table of comparison of popular models and specifications
To make it easier to choose, compare the basic parameters of the different types of onboard bags on the market, which will help you understand which model will best suit your tasks and budget.
| Type of bag | Materials | Bottom hardness | Method of attachment | Weight (approximate) |
|---|---|---|---|---|
| Basic pocket | Oxford 400D | Missing. | Belts/Velcro straps | 0.3 kg |
| Standard. | Oxford 600D + PVC | Insert PVC | Fastex belts | 0.6 kg |
| Pros (with holders) | PVC reinforced | Hard insert | Lyctros/Stripes | 1.2 kg |
| Transportation | Tent fabric | Plywood/Plastic | 4 belts | 1.5 kg |
As you can see from the table, the weight of the bag can vary by five times depending on the model chosen. Ufimka or hankaOverweight accessories can be critical, so it is better to use lightweight options there.
Care, maintenance and storage of accessories
Even the best quality. bag After every fishing, especially in salt water or muddy environment, the bag must be removed, rinsed with fresh water and dried.
Residues of fish mucus, silt or salt can erode protective fabric and accessories, and a wet bag packed in a case with a boat is the perfect environment for mold to develop and produce an unpleasant odor that is very difficult to get rid of.
How do you get rid of the smell of dampness?
If the bag still acquired the smell of dampness, wipe it with a solution of vinegar water (1:3) or a special spray to remove odors in the cabin of the car, then thoroughly dry in the air, but not under direct scorching rays of the sun.
When stored in winter, it is better to keep the bags straightened or rolled up in large rolls so that no curtains form at the places of the folds. Plastic fittings should be lubricated with silicone lubrication so that it does not dry out and crack by the next season.
Regular drying and cleaning of contaminants prolong the life of the onboard bag by 2-3 times, preserving its appearance and functionality.
FAQ: Frequently asked questions
Can I put my bag on the boat permanently?
Technically, this is possible with a two-part polyurethane PVC adhesive, but not recommended. The boat undergoes deformations during pumping/blowing and transport. A rigidly glued bag will create a stress point where the cylinder fabric can break. It is better to use removable mounts.
Will the bag withstand a heavy sonar or battery?
Conventional fabric pockets are not designed to do this, they can come off or deform. For batteries and heavy appliances, there are special sealed boxes with mounts or reinforced platforms that are mounted on floorboards, rather than hanging on board.
What if the belts of the bag are shorter than the diameter of my boat's cylinder?
You can lengthen your belts by buying slings and fastexes of the right size from a sewing or construction store, and you can also use carbines to connect if you don't have enough length, but it's less reliable.
Do I need to take off my bags before transporting the boat in a deflated form?
It is advisable to remove, so as not to create additional cavities on the fabric of the bag and the cylinder. If it is impossible to remove, make sure that the place where the bag is folded does not have rigid elements that can push PVC under the pressure of the rest of the boat.
Is there a difference between a PVC boat bag and a inflatable boat bag?
There's no fundamental difference, but PVC boats typically have smoother surfaces and stiffer cylinders, which allows for tighter mounting of bags. On older inflatable boats, the surface may be villous, and Velcro straps won't stick there, just belts.