Operation of inflatable watercraft requires not only a powerful motor and a reliable anchor, but also competent organization of internal space. Bag for lyctross It's an essential ergonomic tool, allowing you to free the cockpit from excess luggage and spread everything you need at hand, and unlike standard drawers, this accessory is attached directly to the cylinder, taking up the minimum usable area.
Many owners PVC boats They underestimate the importance of fixing things properly, when they see bags slipping or getting wet when they're excited. lyctroses They solve this problem dramatically, and they provide a rigid grip on the hull of the boat, ensuring that your phone, documents, or gear stays dry and in place even in a sharp maneuver.
In this article, we will discuss in detail why it is worth paying attention to mounts through lyctros, what materials are used to produce quality bags and how to avoid common errors in installation. accessory extends the life of the boat itself, distributing the load and protecting the sides from mechanical damage by sharp corners of the boxes.
Design features and purpose of bags on lyctros
The main difference between the products lies in the mounting system: a lyctross is a strong cable, drawn through special holes (bows) along the shaft beam or in other areas of the cylinder. Bag for lyctross It uses this element as a support, wrapping around the cable with special belts or carbines, which avoids drilling additional holes in the cylinder for mounting, which keeps the product tight.
Most often, these bags are made of reinforced PVC It's a very high resistance to ultraviolet, salt water and mechanical abrasion, and the interior is often softly lined to protect the contents from being hit by the rigid elements of the boat. drainage The bottom part, through which accidentally caught water flows back into the boat, and does not remain inside the bag.
⚠️ Warning: When installing the bag, make sure that the fasteners do not RUB the lyctros itself and do not create excessive pressure on the valves or seams of the boat, as this can lead to depressurization.
The function of these bags is varied, with the possibility of organizing small things, a refrigeration bag for catching, or even a soft seat for passengers, and some models have transparent pockets for navigation devices or smartphones, allowing the wearer to use them without removing them from the protection.
Selection criteria: material, volume and compatibility
Accessories market for flyboat It offers a wide range of products, and it can be difficult to choose the right model. The first and most important criterion is compatibility with your model of floating craft. The lyctross diameter and the distance between fasteners can vary from manufacturer to manufacturer. Badger, Flagship or CorsardYou need to know the parameters of your boat before buying.
The second aspect is the material of execution: for fishing in hot climates, light colors are preferred, which are less heated in the sun, keeping the contents cool. reinforced PVCBecause they are completely waterproof and easier to wash after fishing, fabrics with water-repellent impregnation are lighter and more compact when folded, but require more thorough drying.
The volume of the bag is also critical: too large a bag, fixed on board, can shift the center of gravity of the boat or interfere with the rowing if the engine suddenly stalls, the optimal is the volume that allows you to accommodate essentials, but does not occupy more than 15-20% of the width of the cylinder.
- 🎣 Capacity: Evaluate what exactly you plan to store – only gear or also clothes and food.
- 💧 Water resistance: Check the quality of lightning (preferably the presence of valves-blowers) and gluing seams.
- 🔗 Type of fastener: Make sure the belts are adjustable and have reliable fastexes or carbines.
- ☀️ Resistance to UV: The material should not fade and crack after the first season.
Model comparison: specifications table
To make it easier to choose, let's compare the popular types of bags available on the market, and the differences are not just about price, but also about functionality, which has a direct impact on the comfort of use. PVC.
| Type of bag | Materials | Firming | Waterproofness | Best application |
|---|---|---|---|---|
| Universal soft | Oxford 600D | Belts + Velcro straps | Water-repellent | Clothing storage, spare parts |
| Hard (PVC) | PVC reinforced 850g/m2 | Slings on carabiners | Full (sews welded) | Electronics, documents, valuables |
| Refrigerator bag | PVC + polyurethane foam | Lyctross + boards | High. | Catch conservation, products |
| Organizer on board | Nylon + grid | Velcro ribbons | Low. | Weapon, little things, tools. |
As you can see from the table, for storing electronics or documents, it is critically important to choose models from one unit. PVC Welded welds: fabric options, even with good impregnation, can let water through in heavy rainfall or excitement, but for the storage of gear and tools, fabric bags benefit from the presence of mesh pockets and rapid drying.
The secret of the longevity of lightning
To increase the life of lightning on PVC bags, it is recommended to regularly lubricate them with paraffin or special silicone lubricant, which will prevent snagging and corrosion of metal elements in salt water.
Instructions for placing a bag on board the boat
Proper installation ensures that the bag does not go overboard with the contents at the most inopportune time. The installation process does not require special tools, but requires attention to detail. Before starting work, make sure that the boat is pumped to working pressure, since it is difficult to assess the tension of the belts on a deflated cylinder.
First, try on the bag without fixing, determining the optimal location. Usually it is the area behind the seat (the can) or in the nose, if the design allows. Stick the fasteners under the lyctross. It is important that the belt passes tightly, but does not overflow the cable excessively. If the bag is equipped with additional belts to cover the balloon, fasten them, adjusting the length so that the bag sits tightly as if infused.
☑️ Checking before getting on the water
So, if you're placing paired bags on the sides, they need to be fixed at the same distance from the nose or the transom, which is important not only for aesthetics, but also for balancing the boat on the water, and asymmetrical loads can lead to rolling, which is especially dangerous when fishing standing or in windy weather.
⚠️ Warning: Never use sharp objects (knives, scissors) to lift your belts near a pumped boat – one awkward movement can cause a balloon to puncture and a water emergency.
Equipment care and protection from moisture
Aquatic exploitation is aggressive for all materials, salt, sand, fish mucus and sunlight gradually destroy tissue structure and fittings. lyctross It's been in the long run, and after every fishing, you have to rinse it with fresh water, and this is especially true after you go to the sea or into the brackish waters of estuaries.
Drying is another critical step. Even if the bag is made of waterproof PVC, moisture can remain in folds, seams or under the zipper valves. Storing a wet bag in a rolled-up form is guaranteed to produce mold that destroys the polymer coating and creates an unpleasant odor. Dry the products in the straightened form, in the shade, avoiding direct contact with hot surfaces.
To clean up persistent contaminants (oil, gasoline), use a soft sponge and a weak soap solution. Aggressive solvents can damage the PVC protective layer and make the material brittle.
Check the condition of fasteners regularly. Plastic in the sun becomes brittle, and metal is susceptible to corrosion. Timely replacement of a worn carbine or fastex will be cheaper than finding things that drowned with a bag.
Tuning and finalization of standard models
Often, regular bags, which come with a boat or purchased separately, do not perfectly meet the needs of a particular user. tuningFor example, you can add additional hinges to attach the anchor tile or fishing rod, which use stainless steel rings that are sewn or glued to the body of the bag.
Another popular development is the mounting system, which is that the Velcro straps lose their properties over time, can be replaced with more robust plastic fastex buckles or safety cords, and some anglers have internal organizers made of transparent plastic, which allows them to quickly find small hooks and loaders.
- 🛠️ Addition of handles: If the bag is used as a carrier, you can sew reinforced handles on top.
- 🔦 Reflectors: The sticker of retroreflective elements will increase the visibility of the boat in the dark.
- 🧵 Strengthen the seams: Passing seams with a sealant for PVC seams will strengthen protection against leaks.
The modernization of the bag should be carried out using materials resistant to water and UV radiation, otherwise the modified elements will become a weak link in the design.
Frequently Asked Questions (FAQ)
Can I attach the bag to the lyctross if the boat is already pumped?
Yes, it is possible, but it requires caution. When a boat is pumped, the balloon is hard, and it can be difficult to get a belt under the lyctross without the risk of scratching PVC. It is recommended to slightly relieve the pressure in the cylinder at the installation site or use a flat blade for a neat belt installation. However, the ideal option is to install on a slightly lowered boat with subsequent pumping.
Will such a bag withstand the weight of an anchor or a powerful power bank?
Depending on the design of the particular model, tight reinforced PVC bags with wide slings usually can withstand weights of up to 5-7 kg without problems. However, it should be remembered that a heavy object on board changes stability. For heavy loads (anchors), it is better to use specialized anchor runduks or attach them directly to the bottom, rather than hanging them on board.
What if my boat is in the sleeve?
Built-in lyctros is often not free-route, and it is difficult to cover it with a belt. In such cases, bags with a Velcro attachment directly to the cylinder or model that covers the entire perimeter of the balloon (zosters) are used.
Do I need to take off my bag in winter when storing a boat?
Preferably, keeping the bag in one position for a long time, especially if it squeezes the cylinder, can lead to PVC cracks or a weakening of the elasticity of the material at the contact point, and the removed bag takes up less space when storing the boat in the package.