PVC inflatable boats have long since ceased to be just a means for quiet fishing in the coastal zone and have become full-fledged small boats capable of withstanding serious loads. Owners of such boats are constantly looking for ways to optimize the interior space to accommodate gear, anchor, life jacket or spare clothing without taking up valuable space on the floor. lyctross, which is attached directly to the rigid inflated balloon, freeing the cockpit for the legs and active movement.
The use of a balloon bag allows you to unload the central part of the boat, which is especially critical in models with a flat bottom, where every extra item interferes with stability. LyctrossThe stainless, solid synthetic thread running inside a special pocket along the length of the balloon, withstands considerable tension and is ideal for fixing lightweight but bulky accessories. A properly selected and installed bag not only adds convenience, but also increases the overall ergonomics of your swimming, making access to the necessary things instantaneous.
In this article, we will discuss in detail why this type of mounting is considered the de facto standard for modern tuning, what materials are used for sewing and how to avoid common installation errors that can damage an expensive boat.
Benefits of Using Balloon Bags
The main argument for putting a bag on lyctross is to save space. Unlike the rundoos, which are mounted on the floor or the transom, the balloon accessory does not occupy the usable area of the cockpit, which is especially important for boats up to 320 cm long, where there is little space for legs. ergonomics The boats are raised dramatically: you can stand up full-length or turn around without stumbling on plastic crates.
In addition, the bag attached to the cylinder is in the zone of minimal contact with water, the bottom of the boat often takes on splashes and waves, while the sides remain relatively dry, which allows you to store dry clothes, phones, documents or spare batteries for sonar without fear of getting wet. Waterproof The properties of modern PVC fabrics in combination with sealed lightning create a reliable barrier to moisture.
Another advantage is the versatility, and the lyctross bag can be easily moved from one side to the other, or removed completely in seconds, if you need to rebalance the boat or pack it in a shipping bag. mobile It is ideal for those who like to experiment with the layout of their equipment depending on the type of fishing.
- 🎣 Maximum saving of usable space in the cockpit of the boat.
- 💧 Protection of the contents from splashes and waves due to the location above the waterline.
- 🔄 Quick installation and dismantling without using an additional tool.
- ⚖️ Possibility of adjusting the center of gravity by moving the cargo along the side.
Design features and materials
A quality lyctross bag is not just a bag with a hole in the middle, it's a complex piece that requires a precise cut and the use of specific materials. PVC (polyvinyl chloride), often with a density of 650 to 850 g/sq.m. It is this density that ensures the rigidity of the shape: the bag does not sag when empty, and keeps the volume at full load.
The key element of the structure is the liktross tunnel, which is made of a strong sling or reinforced braid, sewn with a double seam, and inside this tunnel is the same cord that is pulled along the perimeter of the cylinder. It is important that the inner surface of the tunnel, in contact with the balloon, is smooth, so as not to damage the cylinder. layer boats in wind or motion.
The fittings are also very important. The lightning must be waterproof, the categories. YKK AquaGuard Or similar, with large teeth that won't stick in the cold, and all the seams are necessarily glued or boiled with high-frequency currents, because the regular thread in constant humidity and ultraviolet light will rot quickly. Durability Products directly depend on the quality of processing seams.
What is lyctross and why is it needed?
The lyctross is a strong synthetic cord (usually Kevlar or high-strength polyethylene) that is sewn into special pockets (licpases) along the junction of the bottom and cylinders. Its main function is to keep the geometry of the boat under pressure, preventing balloons from blowing to the sides, and it is this strained cord that is used as a reliable basis for attaching bags.
Types of bags and their purpose
The PVC boat accessories market offers many options, and the choice depends on the specific tasks of the angler or tourist. Conventionally, all models can be divided into several categories by function and shape. Understanding these differences will help you buy exactly what you need, rather than overpaying for unnecessary features.
The first type is the classic. germ-bagThey are a fully sealed compartment, often cylindrical or oblong, with one large compartment or several pockets, designed to hold electronics, documents, spare sets of clothing or matches, and they can withstand full immersion for a short time.
The second type is specialized holders, which include thermos cup bags, rotating sonar mounts, spinning organizers, which are more open, often made of mesh materials or have transparent windows. Specifics Such products require a rigid frame so that the object held does not hang.
The third type is the combination model, which is the most popular option, which combines the seal compartment on the top with open pockets on the bottom or on the sides, and in the germ zone there are valuables, and in the open pockets there are things that should be at hand: a knife, a yawner, passages, a box of baits. universality Makes them the sales leaders.
| Type of bag | Materials | Tightness | Principal appointment |
|---|---|---|---|
| Tightened | PVC 750 g/sqm | Complete (IP67) | Documents, electronics, clothing |
| Open (bazic) | PVC 650g/sqm | No. | Weapon, small things, quick access |
| Combined | PVC 850g/sqm | Partial | Universal use |
| A glass. | PVC + frame | No. | Drinks, small items |
Instructions for installing a bag on the lyctros
The process of installing a balloon bag is simple, but requires a certain sequence of actions to avoid damaging the boat and ensure reliable fixation. Before starting work, make sure that the boat is fully inflated and the licros are stretched. Installation on deflated cylinders is impossible, since the bag will not fall into place.
First, apply the bag cord through the lyctros (licpase) in the right place on the side, usually between the inflatable seats or in front of the thrash. Carefully straighten the cloth so that it lies exactly along the side, without creating folds that can be rubbed. Then evenly pull the cord of the bag, moving from the center to the edges, or use the manufacturer's fixers (fastexes or Velcro straps) for the final puff.
☑️ Pre-installing check
It is important to ensure that the cord of the bag does not twist or crash into the cylinder fabric at a sharp angle. After fixing, check the reliability of the mounting, slightly plucking the bag in different directions. If you use a model with additional straps or Velcro straps, fasten them to prevent displacement when rolling. Proper installation It ensures that the bag does not fly off even in case of heavy chop.
When installing the bag on a new lyctross, slightly lubricate the cord with silicone lubricant - this will facilitate slipping and prevent cloth from consuming in strong wind.
Operational rules and care
Despite the high strength of the materials, the bag on lyctros requires careful treatment. The main enemy of PVC is ultraviolet radiation and mechanical damage with sharp objects. After each fishing, it is recommended to wipe the bag with a wet cloth, removing salt, silt and fish mucus, which can erode the protective layer of tissue.
Store the product should be spread out, preferably not in a compressed state, so as not to form cloth and lightning. If you plan to not use the boat for a long time, it is better to remove the bags and store them indoors at room temperature. frost makes PVC brittle, and careless handling of a frozen bag can lead to cracks.
⚠️ Attention: Never try to shove sharp corners (hooks, knives without covers, metal tools) into your bag. Even strong PVC can be easily damaged from the inside, resulting in loss of tightness and damage to things.
Check the joints and zippers regularly. If you notice a thread diverging or a zipper catching, there's a problem. Using special zipper sprays will prolong their life several times, and make sure that the sand doesn't get into the fastener mechanism, because it acts as an abrasive.
Regular cleaning and proper storage in a warm place increase the life of the bag per lyctros by 2-3 times.
Frequent errors in selection and use
Many beginners make common mistakes when buying their first bag that negate the benefits of the accessory, one of the most common being buying a bag that is too large for a small boat, and an overall bag can interfere with rowing, grazing oars, or limiting movement on the cockpit, creating discomfort.
Another mistake is ignoring the thickness of the cylinder, boats from different manufacturers have different geometries and diameters of cylinders, a bag designed for a thin side may simply not fit on the "buttery" cylinder of another boat, or, conversely, hang on a thin one, constantly sliding down. Always check the compatibility of the bag model with the diameter. balloon your boat.
There's also a lot of neglect about the quality of the fittings. Cheap zippers on your 500 rouble bags can go away at the worst possible moment, sending your phone to the bottom. Savings on this item are unacceptable. It's better to buy one quality thing from a well-known brand than change three cheap ones in a season.
⚠️ Attention: Do not use the lyctross bag as a foot support or seat, although it appears stiff, it is not designed to weigh an adult and can burst, damaging the boat's cylinder.
FAQ: Frequently asked questions
Will the bag damage the fabric of the boat when carried for long periods?
If properly installed and used, quality materials are not, the smooth inner surface of the bag tunnel and the absence of abrasive particles between the tissues ensure safety, but it is recommended that the position of the bag along the lyctross be changed periodically to avoid local fading of the tissue of the tank underneath.
Can I install a bag if the lyctros is already tightened?
Yes, you can. Most bags are designed to be elastic or adjustable, but you need to insert the bag cord into the liquor, so you don't damage the lyctross, and if the tension is critical, you can slightly ease the pressure in the cylinder for a couple of minutes, put the bag in and pump the boat again.
Will the bag hold the weight of the anchor?
Conventional balloon bags are not designed to store heavy loads such as anchors (5-10 kg or more). Lyctros and cylinder fabric may not withstand such a point load, especially on the wave. For anchors, there are special hanging mounts or spaces on the nose, and it is better to put light things in bags with a total weight of up to 3-5 kg.
How to clean a bag if it is dirty with oil or gasoline?
PVC is resistant to petroleum products, but prolonged exposure to gasoline can soften the plastic. If you get a smear of fuel, immediately rinse the bag with warm water with soft soap. Do not use aggressive solvents (acetone, solvent), as they can dissolve the top protective layer of fabric and paint.