The organization of space on a small vessel is not just a matter of comfort, but a prerequisite for safe operation. When each item has its place, the risk of losing valuable equipment overboard or stepping on a sharp hook is minimized, and it is for this purpose that experienced boaters and anglers use specialized pockets and bags mounted on the lyctros.
The liktros, which is a strong rope that encircles the side of an inflatable boat, is often an underappreciated element of the design, but it is the ideal basis for the placement of additional equipment. Bag for lyctross in the boat It allows you to keep a knife, sonar, navigator or documents at hand without taking up a useful area of the cockpit.
In this article, we will discuss in detail what materials are best for marine use, how to correctly calculate the installation site and why. tent PVC coating is the standard of quality, and you'll learn about the nuances of self-tailoring and the features of ready-made solutions from various manufacturers.
Purpose and functionality of onboard pockets
The main purpose of this piece of equipment is to be quickly available and securely fixing objects while moving. Unlike bags lying on the floor, the pocket on the lyctross is rigidly fixed, which is critical when waves pass, when the boat can start throwing, and loose things turn into dangerous projectiles.
Modern models of onboard organizers offer many uses. lifejacket In short-term availability, a first aid kit, a repair kit or fishing gear, some designs include special transparent inserts for navigation screens, which turns a simple pocket into a full-fledged dashboard.
⚠️ Warning: Never place heavy objects (such as anchors or large batteries) in your onboard pockets without additional insurance, as this can disrupt the boat's balance on the water.
In addition to being a utilitarian function, well-fitting pockets improve ergonomics, and the fisherman or motor operator always knows where the knife or the lantern is, and that eliminates the need to zip around the bottom of the boat looking for the right little change, distracting from the steering of the vessel.
Materials and construction requirements
The choice of material for the lyctross bag is a matter of durability. Aggressive aqueous environments, ultraviolet, salt water and constant contact with inflatable elements dictate strict standards. reinforced PVC It doesn't rot, it doesn't absorb water, it cleans easily.
The design of the product must be strengthened at the attachment points. Lyktros experiences constant loads when inflating cylinders, so the bag should not press on it or rub against the cable with excessive force. Furniture It also has to be made of corrosion-resistant alloys or high-strength plastic, and tractor-type lightning with a large tooth works more reliably in sand and dirt.
The inside of the bag, which comes into contact with the sides of the boat, is often fitted with a soft lining. balloon The presence of drainage holes (lovers) at the bottom allows water to drain, preventing moisture from accumulating inside the pocket.
When choosing a ready bag, pay attention to the seams: they must be glued and stitched with a capron thread, otherwise the water will quickly destroy the structure.
Types of bags and methods of fastening
The inflatable boat accessories market offers a variety of forms and fixation methods. Understanding the differences will help you choose the best option for your tasks. Liktross attachment can be implemented in different ways, and each method has its advantages.
Here are the main types of designs on sale:
- 🎒 Pocket covers: They're put directly on the lyctross, and they're fixed with Velcro straps or straps with buckles, and they're tightly attached to the side.
- 🧗 Covered models: They are attached to the handles for carrying or slings, covering the lyctrosal zone, but not touching the cable itself directly.
- 🧩 Modular systems: A set of pockets of different sizes that can be combined and rearranged depending on the type of fishing.
Particular attention should be paid to fastening systems based on sling and fastexThey allow you to adjust tension, which is important because the diameter of the balloon varies depending on air pressure and ambient temperature. Rigid frame bags are less common, but they are better at keeping shape and protecting fragile electronics.
Instructions: How to properly install a bag on lyctros
Installation of equipment requires care so as not to damage the delicate surface of the boat. Be sure to inflate the boat to working pressure before starting installation, this will allow you to assess the real position of the elements and avoid distortions.
The way you do this is to first determine the optimal location, which is usually the side of the motor operator or the nose for the passenger, and then you put the bag on the lyctross, and make sure that it doesn't interfere with the valves or block access to other components.
Next, you should fix the mount. If you use belts, apply them under the lyctross (if the design allows) or cover the balloon in the area of the cable. Fastening It should be dense, but without fanaticism: excessive compression can deform the balloon.
☑️ Installation verification
Once you're fixed, check the stability. Try pulling the bag sharply, mimicking the snatch on the wave. If it slides, tighten your belts. If the bag deforms the side, loosen the mount. A properly installed accessory should sit as if it were infused.
specifications comparison table
To make it easier to choose, we have prepared a comparison of popular types of onboard bags, and pay attention to the weight and volume, as these parameters become critical for multi-day expeditions.
| Type of bag | Materials | Volume (l) | Features |
|---|---|---|---|
| Basic pocket | Oxford 600D | 2-3 | Low price, suitable for small things |
| A hanging organizer | PVC 450 g/m2 | 5-7 | Wet resistance, several compartments |
| Bag under the sonar | PVC + transparent insert | 4-5 | Screen protection, access to buttons |
| Tactical module | Cordura 1000D | 8-10 | High durability, MOLLE system |
As you can see from the table, the type of materials Cordura And the PVC and dense ones provide better protection, but they also cost more, and the budget options from Oxford are good for a relaxed fishing trip on lakes where there's no risk of catching snags or sharp stones.
Self-made: is sheepskin worth making?
Many gold-handed craftsmen think about hand-crafting, which is a real possibility if you have access to an industrial sewing machine that can sew thick layers of fabric, but there are nuances to consider before you start.
First, a special special needle And the key is sealing the seams, and it's not enough to put down, and you need to have hot welding or special tapes, which is difficult to do at home.
Where do I get the pattern?
You can build the pattern yourself by measuring the diameter of the cylinder in the lyctross area and the desired depth of the pocket, adding seam tolerances (2-3 cm) and a margin for the coverage of the cable.
If you do, use ready-made patterns from manufacturers or create simple shapes without complex angles. seamlessness It is almost impossible to provide homemade products, so it is better to use such bags as dry pockets, where water can get only from above, but not through the joints of fabric.
Care and operation of equipment
Even the best-quality bag requires proper care. After every fishing trip, especially in salt water, the equipment must be washed with fresh water. The salt is crilled in the folds of fabric and lightning, gradually destroying the material and fittings.
Dry pockets should be spread out in the shade, direct sunlight can lead to color burnout and reduced elasticity of PVC. Periodically check the condition of the attachments: plastic-buckle In the cold, they become fragile, and metal can oxidize.
⚠️ Warning: Do not keep your bags on lyctross in a compressed state for a long time, which leads to cavities on the fabric, which can eventually turn into cracks.
Lubricate the zippers with silicone lubrication once a season, which will ensure smooth running and protect the teeth from corrosion. If you notice that the fabric has begun to "crack" in the areas of friction on the lyctros, segera replace the product or reinforce the problem areas with pads.
Regular washing with fresh water and drying in the shade prolong the service life of the bag per lyctros by 2-3 times.
FAQ: Frequently asked questions
Can I use a bag on the lyctross as a seat?
The lyctros and fabric of the bag are not designed to be human-weighted, and this will result in the cylinder deformation, the bag seams ruptured and the cable potentially damaged, which is dangerous to the integrity of the boat.
Will the bag be suitable for an inflatable floor boat (BBB)?
Make sure the bag attachments do not press against the junction of the balloon and the paiola (inflatable floor) so as not to create excessive voltage points.
How to clean a bag if it is heavily contaminated with oil or gasoline?
Use warm soapy water and a soft brush. Aggressive solvents (acetone, gasoline) can damage the PVC coating. For complex stains, there are special PVC cleaners.
Does the bag affect the speed of the boat?
Not if it's installed correctly, the bag is attached to a balloon that's already inflated or in the process of pumping, but it doesn't affect the valves or the airtightness of the compartments by itself.