Choosing a boat for fishing or water tourism is always a search for a balance between reliability, functionality and cost. SwimerIt's a very familiar product to boaters because of its robust design, and many people are looking for the manufacturer's official website to check the current catalogue and find out the real prices, bypassing the markups of intermediaries.
In this article, we will discuss what exactly the manufacturer offers, how not to get confused in the model range and what technical nuances should be paid attention to before buying. Official catalogue It contains many modifications, and it is important to understand how they differ from each other, so as not to overpay for unnecessary options.
We analyzed the current product line, studied the reviews of real owners and prepared a detailed guide, you will learn why these boats are so popular among fans of trophy fishing and which models are now in the top sales.
Features of design and materials of Swimer boats
The basis of any high-quality inflatable boat is the material of cylinders. reinforced PVCThe material density usually varies depending on the model, but for serious boats the standard is at least 750 g/sq.m.
The bottom design is also key to the performance. flat-bottom Both the inflatable keel variants (NDND) and the keel models provide better wave germination and course stability, which is critical when driving with the motor.
The reinforcement system deserves special attention: in places of increased friction, such as the beam and bottom of cylinders, additional protective tapes are often installed, which prolongs the life of the product and protects it from cuts on the rocky bottom or shells.
When choosing a boat, pay attention to the presence of a “heel” for an outboard motor - this is a rubber lining on the transom, which extinguishes vibrations and protects PVC from friction against lower unit.
Overview of the model range: from compact to expeditionary
The manufacturer's catalog is wide enough to meet the needs of different user groups, conventionally all models can be divided into several classes by size and purpose, and compact options up to 3 meters long are ideal for single fishing in small water bodies.
If you plan to go to large reservoirs or take passengers with you, you should look at models ranging from 3.2 to 3.6 meters long. keel and increased load capacity, which allows you to feel confident even with a little excitement.
The largest representatives of the line, for example, the series Swimer 380 or 400They are fully-fledged expedition vessels, equipped with a reinforced transom for high-power engines and have a spacious cockpit that allows you to accommodate a sonar, a box with gear and two or three people.
Technical specifications of popular models
To make it easier for you to navigate the range, we have compiled a comparison table of the main specifications of popular models, which will help you quickly figure out which boat will suit your tasks and the available engine.
| Model | Length, m | Width, m. | Load capacity, kg | River. motor, hp. |
|---|---|---|---|---|
| Swimer 280 | 2.80 | 1.35 | 300 | 5 |
| Swimer 320 | 3.20 | 1.45 | 450 | 5-9.9 |
| Swimer 350 | 3.50 | 1.55 | 600 | 9.9-15 |
| Swimer 380 Pro | 3.80 | 1.65 | 800 | 15-25 |
Please note that loading capacity This is based on the weight of the boat, the floor, the seats and the equipment, so the actual payload will be less than the passport. Always leave a 15-20% margin for safety and a comfortable landing.
It's also important to consider the weight of the boat when packaged. Inflatable keel and sea plywood sleigh weigh significantly more than their flat-bottomed counterparts. If you plan to carry the boat often alone, this can be a crucial parameter.
The optimal choice for universal use in reservoirs is a model length of 3.5 meters with a 9.9 hp engine, providing a balance between speed, load capacity and transportability.
Floors and rigidity: plywood or aluminum?
The rigidity of paiola (floor) has a direct impact on the speed and handling of the boat. There are different options in the catalog. The classic version is waterproof. plywoodIt is durable but heavy and afraid of prolonged contact with water, so it requires careful drying after every fishing trip.
A more modern and lightweight option. aluminum-floorIt doesn't absorb moisture, it's lighter than plywood, it doesn't deform over time, but aluminum floors tend to be more expensive and can be noisier when moving through shallow water or rocks.
There are also combinations where the bulk of the floor is made of plywood and the nose is made of inflatable material for better germination on the wave, depending on your priorities: maximum speed or minimum weight.
How to properly dry the plywood floor?
Plywood paioles can't be dried in the direct sun or in open flames, they can dry and deform, and it's best to wipe them with a dry cloth and leave them in the shade at room temperature for a few hours, allowing air to circulate.
Package and additional accessories
When you buy a boat on the official website or from authorized dealers, you get a basic kit, usually including the boat itself, the bag-pack, the remake, the pump (often foot or hand) and the manual, but this may not be enough to operate fully.
Among the useful additions that are often offered in the catalog, it is worth highlighting:
- 🚣 transom wheels They are indispensable if you often lower the boat on the water alone and far from the parking lot.
- ⚓ Anchor rum - facilitates anchoring, allowing you to quickly set and choose an anchor, without leaning over the side.
- 🎣 Engagement holders - allow you to free your hands during trolling or waiting for a bite.
You should also consider purchasing a special awning or running awning that will protect you from rain and sun. console It's a windshield that turns an inflatable boat into a near-full boat.
☑️ What to check before buying
Where to buy and how not to run into a fake
The issue of finding the official website of the manufacturer is relevant, because there are many dealers on the network, buying directly from the plant or from large dealers guarantees fresh products and a valid warranty. The manufacturer's website usually contains a full price list with current prices.
Beware of offers with suspiciously low prices. Cheapness is often achieved through the use of thinner PVC or simplified seam design. Quality boat It can’t cost a penny because of the cost of materials and the complexity of production.
⚠️ Warning: Be sure to check the product passport and warranty card, without these documents you will not be able to use the warranty in the event of a production defect, for example, joint discrepancies.
When ordering online, read the delivery terms carefully. Boats are bulky, and the cost of transportation can significantly affect the total amount, sometimes it is more profitable to buy from a regional store that already has the goods in stock.
Frequently Asked Questions (FAQ)
What is the maximum size of the engine for the Swimer 350?
For the model 350 is considered optimal engine capacity of 9.9 hp, but the transom design often allows you to install engines up to 15 hp However, it should be borne in mind that with a powerful engine, the boat can become less stable on the course without installing a hydrowing or stringers.
Can I use the Swimer boat in winter?
PVC materials remain elastic at low temperatures, but in the cold they become more rigid. Operation is possible, but it requires caution: it is better to inflate cylinders in the heat, and in the cold only to adjust the pressure, as in the cold it drops.
Does the manufacturer have a motorized boat compartment (RIB)?
Mostly, the Swimer catalog is focused on classic inflatable boats with a hard or inflatable floor. Full-fledged RIBs (with a rigid fiberglass body) under this brand in mass production is usually not, it is another niche.
How long does the boat dry after fishing?
The drying time depends on the weather and the material of the floor. The plywood floor on a hot day will dry in 2-3 hours, in cool weather - up to a day. The aluminum floor is easy enough to wipe dry, which takes a few minutes.