The search for a universal watercraft that would combine compactness in transportation and decent driving qualities on the water often leads anglers to the model. LX 3600 NDNDTThis inflatable vessel has been a strong presence in the 3.6-meter budget boat segment for several years, and the low-pressure inflatable floor (LBBB) design is a major change in how we build and operate, making the process of preparing for the launch as fast and convenient as possible.
Unlike classic models with a slate bottom, there is no need to spend time on the unfolding of heavy plywood sheets and their complex docking. inflatable floor It provides excellent seaworthiness and allows the vessel to behave predictably even on a small wave. For many aquatic motorists, it is the combination of a length of 3.6 meters and the type of bottom that becomes the decisive factor when choosing the first serious vessel for fishing or outdoor activities.
Despite its popularity, however, it has its own technical nuances to consider when buying and operating, and it is important to understand the difference between the claimed specifications and the actual experience of the water, especially when it comes to installing a vehicle. outboardIn this article, we will take a detailed look at all aspects of ownership of this craft, from materials of manufacture to the actual carrying capacity.
Structural features and materials of the body
The basis of durability of any boat from PVC The quality of the fabric used. Timeline LX 3600 The manufacturer uses reinforced polyvinyl chloride density of 750 g / sq.m. This is the standard indicator for boats of this price segment, providing a good balance between strength and weight. The material is resistant to gasoline, oils and ultraviolet radiation, which is critical for prolonged exposure to the sun.
The design of cylinders is made by technology five-chamberEven if one section is damaged, the other four will ensure sufficient buoyancy to keep the crew and cargo afloat until they return to shore, and the partitions between the chambers are well-designed, as evidenced by the long experience of operating these boats in various conditions.
⚠️ Warning: Do not leave a fully pumped boat in direct sunlight in hot weather unattended. The air pressure inside the cylinders increases proportionally to the temperature, which can lead to rupture of the seams or deformation of the structure.
The bottom reinforcement system deserves special attention, and there are additional tapes of denser material along the keel line and in areas of high friction, which extends the life of the product when dragging on sand or pebbles. reinforced PVC It remains vulnerable to sharp objects, so accuracy when descent into the water remains a mandatory rule.
Welding technology
The LX 3600 uses a hot welding method to ensure that the joint is monolithic, and unlike gluing, the weld is not afraid of moisture and temperature changes, becoming weakest link only when the fabric itself is mechanically broken.
Benefits of Low Pressure inflatable floor (LDPB)
The main feature of this model is the use of technology. NDMAIt's not just a marketing ploy, it's a major engineering decision that affects the behavior of the boat on the water. The inflated bottom creates a rigid plane that acts like a hydrofoil, allowing the boat to plane faster when using a motor of sufficient power.
The comfort of being in an inflatable boat is much better than the slate boats, and you can move around the cockpit without fear of upsetting the balance or stepping on the plywood joint, which is especially valuable when fishing, when you need to quickly change position or remove a large trophy from the board.
- 🌊 Excellent seaworthinessSoft bottom extinguishes the blows against the wave, reducing the load on the angler's spine.
- 🚀 Quick assemblyTo bring the boat into working condition, it is enough to pump the cylinders and the bottom, which takes 10-15 minutes with the help of a foot pump.
- 🎒 Compactness: When assembled, the boat takes up less space in the trunk, as there are no rigid structural elements.
It is important to note that the bottom rigidity is regulated by the pump pressure. To achieve optimal driving performance, you need to use a pressure gauge and bring the pressure to the manufacturer's recommended values, usually 0.2-0.25 atmospheres. Insufficiently pumped bottom can lead to a bubble in the aft, which will worsen handling.
Use a pump with a built-in pressure gauge or buy a separate pressure meter. It is impossible to determine the required pressure at 0.2 atmospheres on the eye, and a pumped or under-pumped bottom of the NDNDM drastically changes the running performance of the boat.
specifications and compatibility with the engine
The length of 3.6 meters carries Timeline LX 3600 The boats, which require a 5 to 9.9 hp engine for comfortable plane with two passengers, have a transom board integrated into the inflatable floor and cylinder design, made of moisture-resistant plywood and reinforced with metal or plastic linings, which allows the long leg (L) motors to be installed without the risk of damage to the transom.
When choosing a motor, you should consider not only power, but also weight. For this model, the optimal range is the weight of the engine from 20 to 35 kg. Heavy motors can overload the stern, causing a differentiation and making it difficult to get out to the sleeve, especially when the boat is fully loaded with people and equipment.
Below is a table of the speed and fuel consumption depending on the power of the installed engine when loaded by two passengers (total weight is about 160 kg):
| Engine power (hp) | Maximum speed (km/h) | Recommended screw | Fuel consumption (l/hour) |
|---|---|---|---|
| 5.0 | 18-20 | Step 5-6" | 1.2 - 1.5 |
| 6.0 | 22-24 | Step 6" | 1.4 - 1.7 |
| 9.8 / 9.9 | 30-33 | Step 7-8" | 2.5 - 3.0 |
| 15.0 | 38-40 | Step 9" | 4.0 - 5.0 |
It's worth noting that a motor above 10 hp is possible, but it requires caution. The LX 3600 may not withstand the vibrations and weight of a powerful engine during long-term operation at high speed. In addition, motors with a capacity of more than 10 hp already require the right to operate a small vessel and register with the GIMS if the total length exceeds 20 meters or the power of the engines is a total of more than 8 kW (about 10.8 hp).
Capacity, load capacity and comfort
rated carrying capacity of the boat is 500 kg, however in practice comfortable accommodation is possible for 2-3 people. Timeline LX 3600But the space to accommodate the gear, the anchor and the battery would be minimal, and the best use case would be fishing together, when each had enough room to maneuver.
The cockpit's work area allows two fishing boxes to be placed on the sides, and the bow area leaves room for legs or extra cargo. Inflatable seats (cans) that come as standard provide basic comfort. They are attached to the lyctross along the side and can move along the entire length of the boat, allowing load to be centered depending on the number of passengers.
To increase comfort, many owners install additional accessories:
- 🪑 Spinning platforms: Fast on the cylinders and allow you to conveniently place the gear.
- ⚓ Anchor systems: Installing an anchor dip in the nose facilitates jamming.
- 🔋 Battery anchoragesSpecial bags or boxes for fixing the battery of an electric motor or sonar.
⚠️ Attention: Distribute the load evenly along the length of the boat. Shifting the weight into the nose or stern significantly impairs handling and can lead to a flood or, conversely, to the burrowing of the nose into the water.
Transportability and assembly process
One of the key advantages of the model is its weight. In the basic configuration, the boat weighs about 45-48 kg, which allows it to be transported in the trunk of most wagons, crossovers and even hatchbacks with the rear seats folded. The package bag comes with convenient handles for carrying, although it can be difficult for one person to drag 50 kg over long distances.
The assembly and disassembly process requires no special skills. First, the cylinders are pumped to the working pressure, then the bottom of the BND. It is important to observe the sequence: if you inflate the bottom first, and then the cylinders, you can damage the valves or seams due to improper pressure distribution, the whole process takes no more than 15-20 minutes with a quality foot pump.
☑️ Checklist before getting on the water
When stored in winter, it is recommended to slightly relieve the pressure in the cylinders, but not blow them completely, this will help to maintain the elasticity of the material and avoid the formation of cracks on the folds, it is better to keep the boat in a warm room, in a straightened form, avoiding direct sunlight on the fabric.
The main advantage of the LX 3600 is the combination of compactness in transportation and seaworthiness, close to larger boats, thanks to the technology of NDNDND.
Real experience and typical problems
Analysis of Owner Reviews Timeline LX 3600 This allows you to highlight a number of typical situations that users face, and overall, the boat is rated positively as a reliable tool for fishing in medium-sized water bodies, but there are nuances that you should know about in advance.
Some users have noted that regular valves may require periodic leakage testing. Over time, rubber seals can suffocate, especially if the boat is stored in an unheated garage in winter. Regular valve maintenance and the use of silicone lubricant helps to avoid air leaks at the most inopportune time.
Also worth mentioning is the sensitivity of PVC to punctures. Despite reinforcement, sharp stones, snags or improperly abandoned anchor can damage the balloon. Having a quality remix and skill in using it is a must for the owner of any inflatable boat.
Frequently Asked Questions (FAQ)
Can I use the LX 3600 for sea fishing?
Use in marine conditions is possible only in calm weather and near the shore, the design is not designed for open sea and large waves due to the relatively low sides and features of the inflatable floor, which can be damaged by sharp shells or stones.
Which pump is best for this boat?
For pumping cylinders and the bottom of the NDND, a two-stage foot pump that comes with the kit is ideal. You can use an electric pump from a car battery to speed up the process, but the final pumping must be done manually, controlling pressure with a pressure gauge so as not to pump the boat.
Do I need to register with the GIMS for this boat?
The boat weighs less than 200 kg, so registration is required only if you install a motor with a capacity of more than 8 kW (about 10.8 hp) or if the total weight of the boat with equipment and engine exceeds 200 kg. In most cases, with a motor up to 9.9 hp and a light battery can be done without registration, but the laws may change, so it is worth clarifying the current regulations.
How long does the Taimen boat last when used actively?
With careful operation, proper storage and timely repair of minor damage, the life of a boat made of high-quality PVC is 7-10 years or more. The main enemies of durability are ultraviolet, improper storage (compressed in a coma) and mechanical damage.