Boat fishing opens up completely different horizons for the spinner, which are not available when fishing from shore, especially when it comes to a predator such as the pike. It is with the boat that you can effectively use specific baits such as: teil spinnerIt requires a strictly vertical or steep angled fall to play properly. Unlike shore fishing, where the terrain dictates its conditions, from a boat you can stand at a perfect point above a brow or a penetrance to conduct the glitter as efficiently as possible.
Pike, living in water bodies, often occupies deep areas or steep dumps, where to get from the shore is physically impossible without a long throw, which kills the game of easy baits. Tail spinner In the hands of a skilled angler on a boat, it becomes a versatile weapon that can stir passive fish even in the dead of night or summer heat, and the key advantage here is the ability to control the depth and angle of wiring, which is critical for this type of tooling.
In this article, we will discuss in detail all the nuances of using this bait, from weight selection to tactics of catching difficult places. You will learn why this gear shows its best results from the boat and how to prevent fatal errors during installation. The main secret of success lies not in the speed of rotation of the petal, but in the pause, during which the tooling plans down, imitating an injured fish.
Design features and principle of work
The Tail spinner is a composite bait consisting of a head-load, a main lobe and often an additional tail or second petal. Unlike the classic spinning wheels, the spin axis can shift here, and the structure itself is designed for rapid immersion. The pike is important visual component and the vibrations it feels with the lateral line at a great distance.
The main working element is petalThis distinguishes the Tail spinner from the jig baits, where the game is played only on the wind, and when you catch from a boat, you can set any angle of the bait entry into the water, which allows you to catch vertical walls or sharp changes in depth, where there is often a large pike.
It's important to note the role of the tail, which is often a silicone skirt or a feather tail, painted in bright colors, which stabilizes flight when it is thrown and creates additional water vortexes when it falls, and for a predator, it's a signal of easy prey that can't quickly escape.
Weight and model selection for fishing conditions
Getting the right weight is the foundation of a successful fishing trip. When you're fishing from a boat, you don't have the range of overgrown shore, so you can use heavier models to reach the bottom quickly, and the weight is chosen based on the depth of the fishing point and the presence of the current.
For standing bodies of water and depths up to 3-4 meters, the best choice will be models weighing from 7 to 14 grams. If you plan to fish on the river with the current or at depths of more than 5 meters, you will have to switch to the water. heavyweight It's 18, 21, even 28 grams, and lightweight models just can't hold the horizon, and they're going to be blown away by the flow of water.
- 🎣 Light class (up to 10 g): It is ideal for shallow water, catching in the "windows" of grass and active pike at the beginning of the season.
- 🎣 Middle class (10-18g): universal option for most situations, allows you to work on brows and watering.
- 🎣 Heavy class (18g+): It is required for deep pits, swirls and fishing on a strong current, where a quick descent is needed.
When choosing a model, pay attention to the quality of the vertebral. Cheap options can jam when sand or silt hits, which will lead to loss of play. Also important is the size of the hook - for the pike it must be large and sharp enough, often anglers immediately change regular tees for better quality counterparts from well-known brands.
Spinning and coil fittings
The Tail spinner from a boat has specific requirements for tackles. Because wiring is often vertical or jerky, spinning must have a certain margin of strength and sensitivity. A hard form will allow you to better control the fall of the bait and make sharp cuts.
The coil should have a reliable friction and a smooth laying of the cord. When using heavy weights, the load on the mechanism increases, so you should not save on this element. A wicker cord It is an uncontested choice, since it does not stretch and transmits the slightest touch of the fish, which is critical for timely cutting.
A metal leash becomes a mandatory element of the tooling. Pike teeth are able to bite any fishing line, so the use of fluorocarbon is justified only during periods of extreme caution of the fish, but even then it is better to put a thin twist or string. The leash should be at least 20-25 cm long to exclude crosses and cuts.
| Parameter | Recommendation | Comments |
|---|---|---|
| The rod test | 10-40 g | The Golden Midway for Boat Fishing |
| Spinning length | 2.10 - 2.40 m | Shorter ones are more comfortable in the boat |
| Type of cord | Tiger 0.12-0.16 mm | For sensitivity and strength |
| A lead. | Steel/Titan 20 cm | Protection from pike teeth |
⚠️ Attention: Never use a monophilic fishing line as your main fishing line when fishing for a Tail spinner. Its stretchability will not allow you to feel the moment of petal stopping when falling, and you will miss the best moments for a bite.
Tactics of finding pike from a boat
Having a boat changes the way you look for fish, so you don't have to try to reach the edge of the fish, you can stand right above it, and the Tail spinner tactic is based on the vertical obstacles: dumps, the edges of underwater vegetation, the snag, and the extreme changes in depth.
The most effective method is the "fan" or catching a sector from a boat. When you anchor or use an anchor system, you make a series of throws in different directions, gradually shifting. The pike often stands head to the current or to the depth, so the wiring must cross its potential parking position across or at an angle.
Special attention should be paid to places with a back current and whirlpools. There, the Tail spinner behaves chaoticly, which can provoke a predator to attack. Also, do not ignore the pure "pits" among the grass - the pike likes to go out to hunt them.
Wiring technique: vertical and step
The main thing about the spinner's teil is his fall game. There are two basic wiring techniques that you need to master. One is vertical, where the boat is above the fishing point, and you just lower the bait to the bottom, swinging the rod. The second is the classic jig step, but with shorter winding phases.
And when you're vertically wiring, you put the bait down, then you swing the rod up, and you pick the slack of the cord, and at that point, the petal starts spinning wildly, creating powerful vibrations, and the pause should be such that the bait has time to go down 20 to 40 cm. This is where the most frequent hit is.
When you're fishing for a roll, you use a stepwire, 2-3 turns of the coil and a pause. It's important to adjust the rotation speed so that the petal doesn't stick. If the current is strong, you can increase the pause, allowing the bait to play on the stream. Rhythmicity The key to success is action, pike likes predictable, but teasing game.
⚠️ Attention: When fishing in a snag, do not wait until the bait touches the bottom. Start winding 20-30 cm to the expected horizon, otherwise you are guaranteed to cling to the branch.
Seasonal Features and Weather Factors
Tail spinner shows different efficiency depending on the season. In spring, when the water is not warm, pike prefers slow wiring at the bottom, during which time models with narrow petals that create high-frequency oscillations work well.
In the summer, in hot weather, the fish becomes capricious, and here the tactics of catching in the floes or even near the surface can work, if you use light models. In the fall, during the zest, the pike attacks everything moving, and heavy, noisy tale spinners become favorites.
Wind and wave also make adjustments. On a large wave, the boat sways, and the wiring horizon is constantly lost. In such conditions, it is better to use heavier tools that are less than sail. The transparency of water dictates the choice of color: in murky water you need bright, contrasting colors, and in pure water you need natural, silvery or dark colors.
Frequent mistakes and how to avoid them
Many anglers make the typical mistake of going to the Tail spinner, which is to reduce catches to zero, and the most common is to go too fast, and the petal has to be able to spin and create a game, and at high speed, it just collapses into a tailspin or stops working efficiently.
The second mistake is to ignore pauses. The fisherman waits for a bite on the winding, and the pike attacks at the moment of free planning. You have to be ready to strike at any time when the bait stops. The third thing is the wrong choice of fishing point when the fisherman tries to fish on a flat table where the pike has nothing to chase.
After every trip, especially if you've had hooks or snags, check the last meters of the cord. The scuffs can cause the trophy to break at the most critical moment.
FAQ: Frequently asked questions
Can I use Tail spinner in shallow water?
Yes, you can, but you need to choose models of minimum weight (up to 7-10 grams) and use wiring in the water or near the surface, at depths less than 1 meter, other types of baits, such as poppers or spinnerbates, will work more efficiently.
Which color of petal works best on the pike?
Copper and brass are considered the universal color. Silver works better in cloudy weather and muddy water, and dark colors or "red copper" in sunny water. Experiments with the color of the petal often yield results when the peck is sluggish.
Do I need a squirrel between the line and the bait?
Yes, a high-quality vertebrate is a must. Tail spinner, when wiring, actively twists the line, and without the vertebral cord quickly turns into a spiral, which will lead to constant overlap and loss of range of throw.
Why isn't Tail spinner working on strong current?
In strong currents, the petal may slam, or spin too fast to lose play, and in such cases, you need to increase the weight of the loader to hold the horizon, and change the angle of wiring, going against or across the current.