Operating an inflatable boat in Russian latitudes is rarely done without the need for protection from the scorching sun or sudden rainfall. Time 3600 NDNDM With its spacious deck and high load capacity, it is ideal for extended family trips or serious fishing, but the open structure without a canopy makes a comfortable walk a test of survival in ultraviolet light or heavy rain.
Well-chosen tent It's a multi-task solution, from basic shelter from rainfall to a full-fledged water camping site. The accessory market offers different configurations of frames and fabrics, but not all of them fit equally well with the geometry of this particular model. It's important to consider the features of the high-pressure inflatable floor, which sets the specific rigidity and shape of the cylinders.
In this article, we will discuss in detail which awning will be the best solution for your Taimena 3600You'll learn about the nuances of mounting the frame to the transom and the sides, and how to avoid typical errors in operation. Quality weather protection is not just about comfort, it's about extending the life of the boat and your safety.
Why do you need an awning for a boat NDND
The main function of the awning is obvious: it protects people and things from the weather, but for owners of high-pressure inflatable floor boats, such as the one that is used in the air. Time 3600 NDNDMThe fact that the canopy is critical is also important for other reasons, and the PVC material that the cylinders are made of, although it contains some of the same materials. UV filtersWhen long-term exposure to direct rays of the sun heats up and degrades faster.
In addition, the awning creates a microclimate necessary for comfortable fishing or recreation with children. On the water, reflected light increases the sun's impact, and without shadow you can get heat stroke very quickly. The awning also serves as a windshield, which is especially important when fishing for spinning or feeder, when the wind interferes with the control of gear.
Use the awning not only during parking, but also on the move in strong winds - this reduces the sailing of the boat and increases the course stability.
Fishing boxes, sonars, batteries and personal belongings should not get wet in the rain or burn out in the sun. waterproof The awning transformer allows you to turn an open boat into a sealed space in a matter of minutes.
Types of awnings and frame structures
Choosing awning for Taimena 3600 It starts with the type of frame that is defined, and design has a direct impact on sailing, weight, installation speed and wind resistance, and the market is dominated by several major types, each with its own advantages for specific use cases.
The most common option is a duraluminium pipe frame, a classic solution that has been tested for decades: aluminum is rusty, strong enough, and light enough, but in high winds, these structures can make a distinctive whistle unless special windscreens are used.
- 🌊 Transformer roof - universal version with an opening top, allowing you to adjust the level of lighting and ventilation.
- ⛵ Side tent Covers only the cockpit, leaving the nose and stern open for ease of movement.
- ⛺ Tent-tent Completely closes the boat from all sides, turning it into a camping on the water.
A more modern and technological solution is fiberglass or composite frames, which are highly resilient and better at quenching vibrations. NDMA boats often use combined versions, where the arcs are supported by inflatable tubes through special soft areas to avoid damaging the fabric.
Manufacture materials and their properties
The durability of the awning depends not so much on the frame as on the quality of the fabric. For boat sheds, specialized materials with a multilayer structure are used. Oxford with a polyurethane (PU) or polyvinyl chloride (PVC) coating.
The density of the fabric is measured in den (den) and g/m2. For a boat with a length of 3.6 meters, experiencing severe wind loads on the move, you should not choose thin materials. The optimal density is considered to be from 240 den and above. denser fabric is better shaped, less noise in the wind and retains color longer.
| tissue | Density (den) | Waterproofness | Term of service |
|---|---|---|---|
| Oxford 210D | 210 | Medium (up to 1000 mm) | 2-3 seasons |
| Oxford 300D PU | 300 | High (up to 2000 mm) | 4-5 seasons |
| tarpaulin | - | Maximum | 1-2 seasons |
| Acrylic cloth | - | Medium (breathing) | Seasons 5-7 |
Special attention should be paid to impregnation of the seams, even the best fabric will pass water if the joints of the canvases are not glued or boiled. For NDNDM boats, it is critical that the inner covering of the awning is soft so as not to scratch inflatable tubes in the wind.
Features of installation on Taimen 3600 NDND
Mounting awning on a high-pressure inflatable boat has its own specifics. Unlike the solder boats, you can't just hold the racks to the floor, the bottom will deform. Mounting is carried out mainly to the transom board and special pockets or belts on cylinders.
The installation process usually starts with the rear pillars being fixed to the transom through regular engine or clamping holes, and it's important not to drag the mounts so as not to damage the transom plywood, especially if it's not protected by linings, and the front pillars are placed against the bow or special stops.
⚠️ Attention! When installing racks on cylinders, be sure to use protective linings made of porous rubber or felt, which come with a set. Point pressure of a metal pipe can damage PVC when heated in the sun.
For reliable fixation in windy weather, it is recommended to use additional stretch marks. They are attached to the fryms located along the sides. Taimena 3600The tension must be uniform so that the awning does not clatter, but also does not deform the frame.
☑️ Pre-installing check
Tent maintenance and maintenance
The proper care of the fabric coating can double its lifespan, and the main enemy of the fabric is not water, but dirt combined with moisture and lack of drying. Left in a wet and dirty form for storage, the awning can become covered with mold, which is almost impossible to remove without damaging the protective layer.
After each outing, especially if it rains or splashes, the awning must be thoroughly dried, ideally spread out in the shade, drying in the direct sun is only permissible for a short time, because the ultrafilter destroys the polymer bonds in the tissue.
- 🧼 Wash the awning with warm water using soft soap or special PVC products.
- 🚫 Do not use aggressive chemicals, solvents, gasoline or abrasive sponges.
- 💨 Before packaging, make sure that the fabric is completely dry, otherwise the smell of preley will appear.
Store the awning in a dry, cool place, preferably in a straightened form or in a free bag, not tightly stuffed. Compressing moist fabric in a tube is a sure way to spoil the accessory in one season.
How do you get the smell of preley off the tent?
If the awning is still blocked, try treating it with a weak solution of acetic acid or a special spray to remove mold from the textiles. After processing, be sure to thoroughly dry in the air in the shade.
Self-repair and improvement
Even quality materials are not immune to damage; wind gusts against tree branches, fire sparks or careless handling can disrupt the integrity of the tent; fortunately, most damage can be repaired by using remixes.
For small punctures and cuts up to 5 cm long, self-adhesive PVC patches or special Oxford cloth adhesives are great. The surface before the sticker should be degreased and cleaned with fine sandpaper for better adhesion. It is important to choose a patch in tone or use universal transparent options.
If the seam is damaged, it can be repaired with a special sealant glue for the seams or glued with tape. In the case of breakage of the frame elements (dural tubes), they can be replaced with aluminum tubes of the appropriate diameter, bought in the construction store, or use repair couplings.
⚠️ Attention! Do not use conventional superglue (cyanacrylate) to repair PVC fabrics. It makes the material tough and brittle, which will cause the tissue to rupture around the patch at the first load.
Comparison of budget and premium models
When selecting a tent for Taimeni 3600 NDNDM The difference in cost between the budget Chinese counterparts and the products of well-known brands (both Russian and imported) can be doubled.
Budget models are often made of thinner fabric (190-210 den) and have simplified fittings. Plastic fixtures can crack in the cold, and lightning can catch after the first season of active use.
The premium awnings feature a dense fabric with double PU coating, reinforced seams, high-quality YKK fittings and sophisticated ergonomics, with pockets for trifles, reflective elements and reinforced mounting points, and for professional fishing or frequent use on large water bodies, the overpayment for quality is justified.
The choice between budget and expensive awning should be based on the frequency of use: for 2-3 trips a year, there is enough economy option, for regular operation - only the premium segment.
Frequently Asked Questions (FAQ)
Can I put an awning on the Timen 3600 NDNDD in a strong wind?
Yes, you can, but only if the frame design allows you to install additional stretch marks, without stretch marks, the sailing of the awning can turn the boat over, in stormy weather, it is better to use only the running awning or remove it altogether.
How often should I be able to use the NDND with a tent installed?
In the sun, the air in the cylinders and the bottom expands, the pressure increases. With a tent installed, which creates a greenhouse effect, the pressure can increase significantly. It is recommended to periodically check the pressure with a pressure gauge and put the excess through the valves so as not to damage the seams.
Will the awning fit into the staff backpack of the Taimen boat?
As a rule, the awning assembled (especially with a frame) does not fit into a regular backpack. The awning fabric can be put into a backpack, freeing up space, but the frame pipes will have to be carried separately or use a special awning bag.
Which color of awning is better to choose?
Light colors (gray, light green, sandy) reflect the sun's rays better, and are cooler below. Dark colors (blue, camouflage) heat up faster, but are less noticeable on the water, which is important for fishing. Light shades are preferred for hot climates.